Mercedes-Benz 380SL Brake Parts

CARDONE Master Cylinder Bench Bleeder Tool cuts typical bleeding procedures in half and is a more effective way to purge the brake system of air than other bleeding procedures. This handy, innovative tool is a must, just as bench bleeding is for removing all the air from your brake system, allowing you to spend less time in the garage, and more time on the road.

Product Features:

• Each unit is 100% new, providing consistent performance when servicing your brake system
• Easy to transfer for on-the-spot master cylinder bleeding
• Fluid measurements clearly displayed on each unit in both ounces and milliliters for convenience
• Easy to clean to ensure no cross contamination
• Durability for long lasting performance

The Wearever brand offers a complete line of quality products that are appealing alternatives to higher priced brands without sacrificing quality, durability or performance. Wearever Brake Pad Wear Sensors offer an OE safety feature designed to warn the driver when a brake pad is worn or at the end of its life cycle.

Product Features:

• Triggers a warning light on the dashboard
• Should be replaced each time the brake pad is replaced
• Not available for all makes and models, refer to your vehicle’s owner Manual to validate the number of brake pad wear sensors are required, when applicable

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders are treate

Product Features:

• Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
• Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
• Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
• Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
• Plastic reservoirs are vacuum-tested to ensure they are leak free.
• Plastic reservoirs are 100% vacuum-tested to ensure proper function

Nut

Parking Brake Shoe Spring

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Exact fitment and original replacement
• Helps deliver a quieter, more efficient braking system
• Low-friction PTFE coating to reduce drag
• Manufactured with quality materials to suppress high stress levels

Product Features:

• Made in the USA
• OE Manufacturer
• Ceramic Brake Pad
• Low Dust
• Powerful Quiet Stopping
• Ultra-Premium
• Extremely Rotor-Friendly for Longer Rotor Life

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Exhaust Nut

Carquest Premium Brake Calipers are manufactured to meet or exceed original equipment manufacturer specifications for performance and durability. Where applicable, Carquest Premium Brake Calipers feature a specially formulated OE style zinc di-chromate anti-corrosion finish that provides superior rust protection in all conditions. Carquest Premium Brake Calipers feature new OE design, stainless steel pistons manufactured for maximum durability, and precision machined for an exacting fit and smooth application of braking force. Carquest Premium Brake Calipers include 100% new OE design dust boots and EPDM rubber seals that provide increased resistance to thermal deterioration and years of-leak free operation. Carquest Premium Brake Calipers include application-specific brackets and abutment hardware where required, for easy installation and confident restoration of stopping power. 100% end-of-line inspection and pressure testing guarantees perfect performance right out of the box.

Product Features:

• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• Meets or exceeds original equipment specifications for performance and durability
• OE design stainless steel pistons provide maximum durability and are precision machined for a perfect fit in the caliper body
• Application-specific caliper bodies for easy installation
• Brackets included where required, for complete system restoration
• OE style, zinc di-chromate anti-corrosion finishes provide superior resistance to rust on all iron caliper bodies and brackets
• 100% new, OE style rubber dust boots and EPDM rubber seals for improved resistance to thermal deterioration and cracking
• New bleeder screws, banjo bolts, and crush washers included for a complete repair
• OE Style, stainless steel pad abutment hardware included
• 100% end-of-line inspection and pressure testing ensures quality and performance
• Caliper finish or coating may vary

Platform specific rubber to metal composite material designed to solve noise and vibration problems. MTC rubber to metal composite materials for noise damping in disc brakes combine a number of valuable Features and Benefits: vibration insulation, compressibility and excellent adhesion. The rubber composite materials are excellent for applications with demanding insulation for vibration and noise. The materials retain their integrity even when subjected to high pressure and high temperature. MTC brake pad shims are cut specially to suit specific vehicle models and fit perfectly with genuine pads and those made by other manufacturers.

Product Features:

• Platform Specific Design
• Combats Brake Squeal
• OE-Style Composite Core Shim
• Effective Thermal Barrier

FTE Disc Brake Caliper Repair Kit contains the components necessary for repair of the Disc Brake Caliper. All of the rubber components are of high-quality EPDM compound for resistance to glycol-based brake fluid.

Product Features:

• Guaranteed factory fit to original equipment specifications
• Meets or exceeds original equipment factory safety standards

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

• High metallurgical and machining standard to improve stopping distances
• Produced to match OE design fitment – G 3000 gray iron
• Mill balanced
• TS16949 certified
• Non-directional finish provides smooth vibration free performance
• No need for machining prior to installation
• Durable Metallurgic-Gray finish to all outward non-friction surfaces
• Metallurgic-Gray anti-rust protection to help maintain a clean appearance
• Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
• Designed to minimize brake fade and extend pad and rotor life
• 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

Since 2008 Zimmermann is offering almost 400 Standard and almost 400 Sports Brake Discs in a coated version named Coat Z. The Zimmermann Coat-Z brake disc provides a protective coating that prevents rust and corrosion, extended rotor life and improved visual appearance. To improve the rust protection during storage and usage, Otto Zimmermann GmbH implements this new Coat-Z technology step by step in its production range. Beside the still optimum function of the brake disc, this coating ensures a consistent attractive appearance. Zimmermann brake discs are usually made of cast iron (with flake graphite) of different qualities; they correspond to the material used for the original spare parts. Therefore, the utilization of such materials (referred to as High Carbon by the competition) has always been a matter of course for Otto Zimmermann.

Product Features:

• Coat-Z protective anti-corrosion coating
• No formation of rust at the hub and herewith improved visual appearance
• Immediate functional capability without removal of the coating before mounting
• Excellent deceleration action and no distortion of friction ring at high temperatures
• Substantial weight saving and therefore less unsprung mass
• Floating mounting enables radial expansion of the brake disc under relatively heavy loads, thus preventing shielding and increasing resistance to heat cracks
• Hot spots prevented by optimized design of ventilation channels
• 1:1 exchange of original disc possible
• Not subject to registration: general ABE certification supplied with disc
• No conversion required for brake tuning

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications, provides better value and
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

Carquest Premium Gold brake pads are original equipment replacement brake pads that provide consistent, quiet, and clean braking.

Product Features:

• Application-specific friction formulations provide shorter stopping distances and extended pad life
• Hardware included for most applications, provides better value and
• OE-designed slots and chamfers to reduce noise and vibration
• Multi-layer shim provides near silent braking
• Powder-coated backing plate prevents corrosion

This is a brake hardware kit consisting of (4) 000 991 03 60 brake pins and (2) 000 421 02 91 anti-rattle spring. The ATE Brake Pad Pin is an ideal high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

CARDONE New Vacuum Brake Boosters, Hydro-Vac Boosters, and Hydraulic Boosters are back by CARDONE New Engineering. CARDONE New Engineering is based off 40 years of CARDONE engineering expertise, where original design weaknesses are identified, corrected and where applicable upgraded to provide a more durable part then the original unit. Every unit is 100% new and manufactured to meet or exceed OEM performance, providing a quality product both you and your vehicle rely on.

Product Features:

• A premium finish is applied on every unit for superior corrosion protection.
• Each unit is 100% vacuum and pressure tested to ensure reliable performance.
• Pedal rods are 100% functionally tested to ensure proper operation.
• Guaranteed fit and function.
• Guaranteed fit and function.
• Meets or exceeds O.E.M. performance.

ATE supplies brake boosters in single or tandem versions and in all desired sizes and is one of the world’s leading OE suppliers of brake control and brake assist systems. The tie rod version, which is available for all designs, provides further weight reduction and additional optimized elongation characteristics. Front-bolt concepts on a tie-rod basis facilitate installation. Electric and mechanical brake assist systems, sensors for OHB, ACC, ESC, etc., as well as measures designed to optimize crash behavior complete the product portfolio. Brake assist systems are an important aid in emergency braking situations in which a driver needs to respond to an emergency situation, but does not apply the brakes with sufficient pressure. The brake assist recognizes the brake application speed to detect this type of panic situation, and activates the brake booster or the EBS hydraulic unit. Maximum braking is thus achieved although the force on the brake pedal is low – the shorter braking distance can even be life-saving.

Product Features:

• Original equipment (OE) quality
• Wide range of single and tandem Brake Boosters
• Unique tie-rod design meaning lighter and thinner parts for more efficient performance
• Most units are made of steel, but lightweight aluminium versions are also available.

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• All units are 100% tested to ensure reliable performance.
• Guaranteed fit and function.

Brake M/C Reservoir