Mercedes-Benz 300CDT Steering and Chassis Parts

Essential Mercedes-Benz 300CDT Steering and Chassis Parts

Lemfoerder – ZF/Lemfoerder Tie Rod End (Part No.M301011717LEM)

ZF/Lemfoerder Tie Rod End

from

$21.49
The ultimate in safety and quality in steering and suspension is what sets ZF-LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions as service and costs only meet the customer’s demands when high quality is implemented systematically.

Product Features:
  • OE expertise and quality
  • Precision manufactured housing and components
  • Corrosion protection
  • Permanently attached boot
  • One-piece forged housing for easier steering
See More

Hebmuller – Hebmuller Steering Gear Seal Kit (Part No.M102116606HEB)

Hebmuller Steering Gear Seal Kit

from

$45.49
The Hebmuller Steering Gear Seal Kit is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:
  • Premium aftermarket replacement
  • Manufactured to meet or exceed OE specifications
See More

Carquest Premium – Pressure Hose Assembly (Part No.36193)

Pressure Hose Assembly

from

$109.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose (J189) (sold by foot) (Part No.35001)

Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)

from

$7.79
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)

Febi – Drive Shaft Flex Joint (Guibo) (Part No.K102016594FEB)

Drive Shaft Flex Joint (Guibo)

from

$106.86
With Hardware The OE quality Febi flex joint is made of high quality rubber and is reinforced with advanced fiber materials. The manufacturer recommends the flex disc be replaced whenever the clutch components are being replaced. TECH TIP : Flex discs have an alignment or triangle arrow formed into the rubber. The pointed end must face the mounting flange on the transmission when installed to ensure longevity.

Product Features:
  • OE quality, fit and performance
  • High quality rubber
  • Reinforced with advanced materials
  • Excellent vibration control
See More

Dorman – Suspension Control Arm (Part No.520-755)

Suspension Control Arm

from

$62.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:
  • Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
  • Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
  • Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
  • Durably designed – additional coatings offer long-lasting rust and corrosion resistance
See More

Cardone – Power Steering Filter (Part No.20-P038F)

Power Steering Filter

from

$31.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:
  • In-line filter with serviceable filter element
  • Patented built-in bypass that filters up to 190 micron particles
  • Designed to extend the life of the steering system
  • Sure-grip barb connections are included to ensure proper hose fitment
See More

MTC – P/S Reservoir Gasket (Part No.M203270025MTC)

P/S Reservoir Gasket

from

$3.25
P/S Reservoir Gasket

Driveworks – Taper Bearing Set (Part No.S-A-5)

Taper Bearing Set

from

$10.29
Value-priced bearing meets all cataloged application requirements.

Product Features:
  • Brand may vary by location
See More

Carquest Premium – Bulk – 3/8" I.D. Return Hose J189 (Part No.36196)

Bulk - 3/8" I.D. Return Hose J189

from

$39.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Carquest Premium – Bulk – 3/8" ID Return Hose (CPE) (sold by each) (Part No.34995)

Bulk - 3/8" ID Return Hose (CPE) (sold by each)

from

$2.99
OE routing ensures a proper fit. Engineered and constructed to withstand the high-pressure pulsations and heat found in steering systems.
See More

Lemfoerder – Sway Bar Link (Part No.L103016059LEM)

Sway Bar Link

from

$14.02
The Lemfoerder Sway Bar Link is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:
  • OE-Equivalent and direct fit application
  • Reduces squeaks, rattles, and vibration noise
  • Resistant to oil and other contaminants
  • Meets or exceeds OEM specifications
See More

Febi – Febi Idler Arm Repair Kit (Part No.M303027108FEB)

Febi Idler Arm Repair Kit

from

$36.05
The Febi Idler Arm Repair Kit restores the idler arm reducing front-end vibration, shimmy and unsafe handling. The Febi idler arm Repair Kit is manufactured to OE tolerances for a proper fit and function.

Product Features:
  • Improves steering response
  • Repairs worn components
  • Reduces vibration
  • Reduces tire wear
See More

Elring – Power Steering Seal (Part No.M208036389ELR)

Power Steering Seal

from

$9.76
Power Steering Seal

Corteco – P/S Seal (Part No.M208012239CFW)

P/S Seal

from

$6.27
P/S Seal

MOOG – Ball Joint (Part No.K9139)

Ball Joint

from

$34.49
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.

Product Features:
  • PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
  • STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
  • KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
  • ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
  • EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
  • COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
See More

TRW – Ball Joint (Part No.L202015491TRW)

Ball Joint

from

$36.01
TRW sets the standard within the Aftermarket, with tests that go beyond the ordinary to ensure every chassis part we produce meets stringent vehicle manufacturer quality standards, in line with the Original Equipment specification. To help make sure that our parts can go the distance, TRW utilizes on the road tests and the most advanced test machines available, in both our Original Equipment and Aftermarket facilities as well as by independent testing labs. So you can be sure that TRW parts are tested for your safety.

Product Features:
  • Long lasting dust covers made from the highest quality rubber that eliminate dust and water from entering the ball joint
  • Low friction plastic bearings that enhance damping and reliability
  • Manufactured using forged or cold formed steel
  • Two-seat design is standard, and eliminates the need for a spring
  • Top of the ball pins are polished
  • Salt Spray Test (240hrs)
  • Dynamic Test and Elasticity Test
  • Original Equipment quality hardware installation accessories
  • Acoustic measurements to ensure driver comfort
  • Strength tests for durability
See More

Helping You Find the Right Steering and Chassis Parts for Your Mercedes-Benz 300CDT

You love your 300CDT. So we’ve made it easier than ever to help you find Mercedes-Benz 300CDT Steering and Chassis Parts in our online catalog. Our inventory holds 39 aftermarket and OEM Steering and Chassis Parts for your Mercedes-Benz 300CDT, ranging from $2.99 to $109.99.

We offer parts from 18 brands trusted to make quality Steering and Chassis Parts for your Mercedes-Benz 300CDT. Before you buy, take some time to read through customer reviews. We currently have 412 reviews of Mercedes-Benz 300CDT Steering and Chassis Parts from previous customers. Some of the top rated parts include Power Steering Filter with 5.0 stars and Power Steering Filter with 5.0 stars.

Find your 300CDT Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mercedes-Benz 300CDT part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Steering and Chassis Parts Brands for Your Mercedes-Benz 300CDT

Our inventory holds Steering and Chassis Parts for your Mercedes-Benz 300CDT from 18 trusted brands. You’ll find OEM and aftermarket parts from brands like Driveworks, Carquest Premium, and Cardone, all of which can keep that Mercedes-Benz happy.

Top-Rated Driveworks Steering and Chassis Parts

Leading Driveworks Steering and Chassis Parts

We carry Driveworks brand parts for your Mercedes-Benz 300CDT across several catalog categories, including Power Steering Parts. Some of our most reviewed Driveworks parts include:
Taper Bearing Set
from $10.29
(70)
Taper Bearing Set
Pinion Bearings

FAQs for Mercedes-Benz 300CDT Steering and Chassis Parts

What are the most purchased Steering and Chassis Parts for the Mercedes-Benz 300CDT?

Out of 39 Steering and Chassis Parts for the Mercedes-Benz 300CDT, the most popular in our inventory are:
Bulk - 3/8" I.D. Return Hose (J189) (sold by foot)
from $7.79
This product is not rated
Bulk – 3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Reservoir Hoses
Power Steering Filter
from $31.99
(59)
Power Steering Filter
Power Steering Filters
Bulk - 3/8" ID Return Hose (CPE) (sold by each)
from $2.99
This product is not rated
Bulk – 3/8" ID Return Hose (CPE) (sold by each)
Power Steering Return Hoses

What are the top-rated Mercedes-Benz 300CDT Steering and Chassis Parts?

Top-rated Steering and Chassis Parts for your Mercedes-Benz 300CDT based on customer reviews/ratings are:
Power Steering Filter
from $48.49
(2)
Power Steering Filter
“installed on return line to power steering pump no problems with leaks”
Power Steering Filter
from $46.99
(1)
Power Steering Filter
“Good filter, works great”