Mazda Mizer Cooling and Climate Controls
Top Mazda Mizer Cooling and Climate Controls Categories
We carry over 24 Cooling and Climate Controls in inventory for the Mazda Mizer. If you’re looking for aftermarket Cooling and Climate Controls for your Mazda Mizer, check out all these categories:
Essential Mazda Mizer Cooling and Climate Controls
Imperial – Electric Fan, 10" Diameter (Part No.226110)
from
$72.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Rapid-Cool Thin-Line electric fans
- 10″ Diameter
- 650 CFM
- Use as a pusher or puller fan
- Motors built and tested to quality specifications
- 10 in. universal fit reversible fan
- 650 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Factory Air – Cap & Valve A/C System Seal Kit (Part No.26777)
from
$20.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Factory Air.
Product Features:
See More
Product Features:
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
- All the seals needed to complete the job
- Compatible with both R12 and R134a refrigerants
- SUV and rear air applications
- Application specific
Factory Air – Green Round O-Ring (sold by each) (Part No.24610)
from
$0.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Imperial – Thermostatic Fan Control – Preset (Part No.226206)
from
$46.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Preset thermostatic fan control
- 185 Deg. F preset
- For use with Imperial electric fans
- Probe installs into radiator fins
- Contains gaskets, O-rings, or seals to properly replace the product
- Brass construction for accurate temperature sensing
- Zinc coated terminal to resist corrosion
- Vehicle specific applications
Carquest Premium – Engine Cooling Fan Module (Part No.ACC1313)
from
$99.99
All modern vehicles consist of several independent operating systems controlled by a main system processor with independent sub-processors. The sub-processors provide class 2 serial information data to the main processor while handling the operation of the system and carry the circuit load to protect the main operating system. When replacing any level processor programming may be needed to enter the unit into the vehicles main operating system.
Product Features:
See More
Product Features:
- Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Imperial – Electric Fan, 12" Diameter (Part No.226112)
from
$108.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Rapid-Cool Thin-Line electric fans
- 12″ Diameter
- 800 CFM
- Use as a pusher or puller fan
- Motors built and tested to quality specifications
- 12 in. universal fit reversible fan
- 800 CFM
- UNIVERSAL fan, NOT a direct OE replacement. Measure core and verify space.
Carquest Premium – Radiator Cap: 13 PSI (Part No.10229)
from
$10.99
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Carquest Premium – Radiator Cap: 13 PSI (Part No.10329)
from
$10.49
Crafted to meet the exact specifications set by Original Equipment Manufacturers (OEM), these products are engineered for effortless installation and removal. Constructed from premium-grade components, incorporating proper relief and vacuum valves, they ensure optimal performance even in the most demanding automotive cooling systems. Rigorously quality-tested, these components provide exceptional, out-of-the-box performance and superior durability to meet or exceed the highest standards of today’s vehicles.
Product Features:
See More
Product Features:
- Safety lever to vent coolant pressure before removal
- Maintains proper cooling system pressure
- Easy installation and removal
- 100% tested to ensure proper pressure and longevity
- Meets all OEM specifications
Felpro – Engine Coolant Outlet Gasket (Part No.35251)
from
$4.99
Fel-Pro® gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
Carquest Premium – Engine Water Pump: New, Gasket/Seals Included (Part No.T1076)
from
$46.49
Carquest Premium water pumps are 100% new, high-quality parts that meet or exceed original equipment (O.E.) specifications. All components, including the housing, hub, bearings, gaskets and seals are designed for long-lasting service life. These water pumps are supplied with the gaskets or seals necessary for installation. Our Carquest Premium water pumps undergo stringent testing to ensure superior performance that we stand behind with an industry-leading warranty.
Product Features:
See More
Product Features:
- 100% tested for reliable performance
- Durable housing features precisely machined mounting surface for proper sealing and fitment
- Equipped with weep chamber or similar feature to help prevent unnecessary replacement
- Included heavy-duty unitized bearings, pressed-on hubs and optimal impeller clearance for a long-lasting water pump
- All gaskets or seals necessary for water pump are included
- This pump is driven by the accessory belt and we recommend replacement if nearing service recommendation
- This pump is driven by the timing chain; see vehicle manufacturer recommendation for replacement of timing components
- This pump is driven by the timing belt; see vehicle manufacturer recommendation for replacement of timing components
Dorman – 5-Wire Style Relay (Part No.85170)
from
$18.99
This HVAC relay connector is designed to match the appearance and function of the original hardware on specified applications. Made of quality materials, it is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this HVAC relay connector matches the appearance and function of the factory hardware on specified applications
- Ideal solution – this connector is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Radiator Cap Tester Adapter (Part No.12552)
from
$14.99
Tester adapter for the MT-300 cooling system pressure testers. Professional grade test equipment to ensure an automotive cooling system is operating at the correct pressure. Made from high quality materials to ensure durability. Designed to test automotive coolant caps.
Product Features:
See More
Product Features:
- Machined metal construction
- Works with MT-300 pressure tester
- Tests coolant caps
- Professional quality
Factory Air – Green Round O-Ring (sold by each) (Part No.24650)
from
$1.99
Made from HNBR material; Compatible with R12 And R134A; High quality construction; Universal applications
See More
Carquest Premium – A/C Valve Core/Cap (Part No.T26777)
from
$20.99
Carquest A/C Accessories provide a comprehensive offering of premium quality fittings and tools to service all aspects of an a/c service from the most simple fitting replacement to complex diagnostics required for late model applications.
See More
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13868)
from
$10.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13778)
from
$15.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13399)
from
$10.49
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: 180 Degrees (Part No.13398)
from
$9.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Carquest Premium – Standard Thermostat: 195 Degrees (Part No.13779)
from
$16.99
Carquest Premium Thermostats are manufactured with OEM quality materials and safety standards by an OE Supplier. This thermostat will meet and exceed the expectations of the OE thermostat to insure the best product for your cooling system. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant. Offset design, air relief valve, and OEM style seals included where applicable.
Product Features:
See More
Product Features:
- High grade stainless steel and copper construction
- Meets or exceeds OEM standards
- Consistent and precise response to cooling system needs
- Original equipment design for worry-free direct fit replacement
- 100% tested and calibrated
Motorad UltraStats – UltraStat Thermostat: 180 Degrees (Part No.5240-180)
from
$14.99
This premium upgraded thermostat is everything you were looking for. UltraStat Thermostats are the toughest thermostats on the market. All heavy gauge stainless steel construction provides long-life durability, as well as complete corrosion resistance. Exclusive BLVT Valve technology minimizes thermal shock to cooling system components. This is the perfect upgrade to help insure your cooling system is working exactly as you need and expect it to for longevity.
Product Features:
See More
Product Features:
- Exclusive BLVT Valve Technology minimizes thermal shock to cooling system components
- Heavy gauge stainless steel components offer increased reliability and long-lasting durability
- Stainless steel thermal element for unmatched corrosion resistance and revolutionary REAX wax mixture provides quicker reaction time
- AccuSpring Design for stable temperature control and increased cabin comfort
Mazda Mizer Cooling and Climate Controls Categories
Helping You Find the Right Cooling and Climate Controls for Your Mazda Mizer
You love your Mizer. So we’ve made it easier than ever to help you find Mazda Mizer Cooling and Climate Controls in our online catalog. Our inventory holds 24 aftermarket and OEM Cooling and Climate Controls for your Mazda Mizer, ranging from $0.99 to $108.99.
We offer parts from 6 brands trusted to make quality Cooling and Climate Controls for your Mazda Mizer. Before you buy, take some time to read through customer reviews. We currently have 688 reviews of Mazda Mizer Cooling and Climate Controls from previous customers. Some of the top rated parts include Adjustable Thermostatic Fan Control with 3.4 stars and Standard Thermostat: 180 Degrees with 4.9 stars.
Find your Mizer Cooling and Climate Controls here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mazda Mizer part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Cooling and Climate Controls Brands for Your Mazda Mizer
Our inventory holds Cooling and Climate Controls for your Mazda Mizer from 6 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Imperial, and FELPRO, all of which can keep that Mazda happy.
We have Felpro parts available for your Mazda Mizer in categories like Engine Cooling Parts. Some of the top-rated Felpro parts in these categories are:
Top-Rated Carquest Premium Cooling and Climate Controls
Leading Carquest Premium Cooling and Climate Controls
We carry Carquest Premium brand parts for your Mazda Mizer across several catalog categories, including Engine Cooling Parts. Some of our most reviewed Carquest Premium parts include:
FAQs for Mazda Mizer Cooling and Climate Controls
What are the most purchased Cooling and Climate Controls for the Mazda Mizer?
Out of 24 Cooling and Climate Controls for the Mazda Mizer, the most popular in our inventory are:
What are the top-rated Mazda Mizer Cooling and Climate Controls?
Top-rated Cooling and Climate Controls for your Mazda Mizer based on customer reviews/ratings are:
from
$65.99
(33)
Adjustable Thermostatic Fan Control
“If you read the instructions it’s pretty self explanatory.”
from
$15.99
(16)
Standard Thermostat: 180 Degrees
“Car did not run hot, but lower radiator hose started leaking and was too hot to touch. Replaced and lower radiator hose temp was much cooler. Car runs”
from
$72.99
(14)
Electric Fan, 10" Diameter
“So, the Air Conditioner Condenser fan motor failed on my 2003 Dodge Ram 1500. It turns out that the 2002 – 2005 Rams all use the same AC Condenser fa”
