Mazda 626 Performance and Racing Products

Essential Mazda 626 Performance and Racing Products

Energy Suspension – Control Arm Bushing Set (Part No.11.3101G)

Control Arm Bushing Set

from

$17.99
For both front and rear of suspensions on cars, trucks and SUVs. Maintains proper alignment under extreme conditions on and off-road and during competition. Improves vehicle handling, cornering and overall control. Full floating for smoother operation. Made of Energy’s Hyper-Flex performance polyurethane to add performance and durability.

Product Features:
  • Maintains Better Alignment While Driving
  • Full Floating and Non Binding
  • Fits Into the Remaining Stock Control Arms
See More

Energy Suspension – Tie Rod Dust Boot (Part No.9.13106R)

Tie Rod Dust Boot

from

$5.99
Repair torn and worn-out boots of suspension tie rod ends – without having to buy the entire and expensive tie rod. Adds durability surpassing most OEM rubber boots. Exclusive 5 point sealing action. Choose from four sizes and round or octagon styles. Made of Energy’s Hyper-Flex performance polyurethane for added performance and durability.

Product Features:
  • Easy to Install
  • Superior Material
  • Saves Your Tie Rods
  • Lasts Longer
  • Looks Great
See More

Earls Performance Product – Brake Bleeder Screws (Part No.280029ERL)

Brake Bleeder Screws

from

$40.99
Brake Bleeder Screws

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Accel – Super Stock Replacement Coil for Improved Performance, Starting, and Power (Part No.8140)

Super Stock Replacement Coil for Improved Performance, Starting, and Power

from

$42.49
Excellent high performance replacement for import and domestic vehicles with canister type oil filled coil. Re-engineered windings for even higher energy output resulting in quicker starting improved throttle response and more high RPM power. Designed to work with Points style and Breakerless electronic ignition systems. Heavy duty black Alkyd tower provides in flashover in protection to primary terminals. ACCEL Yellow can. 42000 volts effective up to 6500 RPM 1.4 ohms on the primary

Product Features:
  • 42000 Volts
  • Effective To 6500 RPM
  • Quicker Starting
  • Improved Throttle Response
  • Higher RPM Power
  • Can Finished In Yellow
See More

Accel – Ford 4-Twr.Dis Supercoil Pack (Part No.140018)

Ford 4-Twr.Dis Supercoil Pack

from

$116.99
Engineered to be the only true performance Ford 4-tower style EDIS coil. Advanced bobbin technology, highly specialized silicone magnetic steel core, optimized winding, resistance, and turns ratio result in higher energy and voltage outputs, and longer arc duration. Direct OEM replacement. Must use factory firing order. Compatible with Ford EDIS computer controlled ignition system as well as Crane or MSD capacitive discharged (CD) DIS ignition systems. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Secondary towers molded in high dielectric strength ACCEL Yellow. Packaged as single unit: 4 cyls require 1 coil pack, “”twin plug”” 4 cyls require 2 coil packs and 8 cyls require 2 coil packs. No tsuitable for some late 1999 applications.

Product Features:
  • 10-15% More Energy
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Highly Specialized Silicone Magnetic Steel Cores
  • Standard Motor Products SMP Fd-487
  • MSD 8241
See More

Accel – Supercoil (Part No.140001)

Supercoil

from

$105.99
Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

Product Features:
  • Oil Filled For Better Cooling
  • Optimized Low Resistance
  • Silicon Magnetic Steel E-Core
  • Higher Energy/Voltage Outputs
  • Quicker Starts
  • Improved Idle Quality
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Accel – Ford 1984-98 Eec-Iv Supercoil (Part No.140012)

Ford 1984-98 Eec-Iv Supercoil

from

$77.99
Engineered with optimized low resistance, high turns ratio windings around an M36 high silicone magnetic steel E-core for higher energy and voltage outputs. Results in quicker starts, improved idle quality, and crisper throttle response. Compatible with late model Ford EEC-IV computer controlled ignition system equipped with a TFI distributor. Direct OEM replacement. Can also be used with an ACCEL, Mallory, Crane, Holley or MSD capacitive discharge ignition system. Special high temperature epoxy resists shock and vibration, while increasing thermal conductivity. Brass coil wire contact increases energy efficiency and resists corrosion better than aluminum. High dielectric strength ACCEL Yellow over-molded housing.

Product Features:
  • Direct Plug In Replacement Direct OE Fit
  • Advanced Bobbin Technology
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Standard Motor Products SMP Fd-478
  • MSD 5527
  • Resists Shock And Vibration
  • Resists Corrosion
See More

Mallory – Promaster Classic Series; Ignition Coil (Part No.29440)

Promaster Classic Series; Ignition Coil

from

$186.99
Universal street and strip. For street-driven vehicles with breaker point ignition or OE electronic ignition. Delivers optimum performance when used with these Mallory ignition products: UNILITE (R) distributor with a HYFIRE (R) capacitive discharge ignition, magnetic breaker less distributor with a HYFIRE (R) capacitive discharge ignition, or dual point distributor. Effective to approximately 6500 RPM when used with a point type distributor (depending on engine combination). Effective to approximately 8000 RPM when used with a Mallory HYFIRE electronic ignition control (depending on engine combination).

Product Features:
  • Glass Filled Polyester Case
  • Longer Spark Duration
  • Increased Performance
  • No Energy Loss Due To Arcing
  • Includes Brass Contact Terminal
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1008)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$17.99
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. Designed to operate with all synthetic, conventional, and blended motor oils, K&N’s pleated synthetic-blend filtration media helps to shield your engine from contaminants and ensure a consistent flow of oil. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • Designed to allow high flow rates and a consistent flow of oil to your engine
  • Pleated synthetic-blend filtration media removes most harmful contaminants
  • Fast and easy Wrench-Off removal using the welded one-inch hex nut
  • High capacity to withstand the service intervals recommended by vehicle manufacturers
  • Heavy-duty canister for outstanding durability
  • Laboratory tested to ensure excellent capacity, efficiency, and mechanical strength
  • Designed to operate with all synthetic, conventional, and blended motor oils
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-1010)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$18.49
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.
See More

Energy Suspension – Sway Bar End Link Kit (Part No.9.8123R)

Sway Bar End Link Kit

from

$25.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

Product Features:
  • Made from HYPER-Flex Polyurethane
  • Allows Vehicle to Work At Maximum Efficiency
  • Easy to Install
  • Superior Performance and Greater Longevity
  • Lasts Much Longer Than OEM Rubber End Links
See More

Energy Suspension – Sway Bar End Link (Part No.9.8106G)

Sway Bar End Link

from

$12.99
Made of high durometer, very firm, Hyper-Flex performance polyurethane. They’re economical, increase efficiency and are easy to install. Use Energy Suspension sway bar end links with sway bar bushings to get the maximum performance benefit. Combine both for the same effect as buying a larger sway bar. Together they offer a dramatic improvement in performance and handling.

Product Features:
  • Made from HYPER-Flex Polyurethane
  • Allows Vehicle to Work At Maximum Efficiency
  • Easy to Install
  • Superior Performance and Greater Longevity
  • Lasts Much Longer Than OEM Rubber End Links
See More

Helping You Find the Right Performance and Racing Products for Your Mazda 626

You love your 626. So we’ve made it easier than ever to help you find Mazda 626 Performance and Racing Products in our online catalog. Our inventory holds 13 aftermarket and OEM Performance and Racing Products for your Mazda 626, ranging from $5.99 to $186.99.

We offer parts from 5 brands trusted to make quality Performance and Racing Products for your Mazda 626. Before you buy, take some time to read through customer reviews. We currently have 18,397 reviews of Mazda 626 Performance and Racing Products from previous customers.

Find your 626 Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mazda 626 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your Mazda 626

Our inventory holds Performance and Racing Products for your Mazda 626 from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like K&N, Accel, and Energy Suspension, all of which can keep that Mazda happy.
We have Mallory parts available for your Mazda 626 in categories like Performance Ignition Products. Some of the top-rated Mallory parts in these categories are:
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
Performance Ignition Parts

Top-Rated K&N Performance and Racing Products

Leading K&N Performance and Racing Products

We carry K&N brand parts for your Mazda 626 across several catalog categories, including Performance Oil Filters. Some of our most reviewed K&N parts include: