Mazda 3 Suspension Parts
Top Mazda 3 Suspension Parts Categories
We carry over 108 Suspension Parts in inventory for the Mazda 3. If you’re looking for aftermarket Suspension Parts for your Mazda 3, check out all these categories:
Essential Mazda 3 Suspension Parts
MOOG – Rear Lower Forward Suspension Control Arm (Part No.RK660012)
from
$62.99
Product Features:
See More
- EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
Monroe – Strut-Mate Rear; Front Suspension Strut Bumper and Bellows Kit (Part No.63640)
from
$36.99
Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
MOOG – Coil Spring Set (Part No.81693)
from
$122.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
Monroe – Strut-Mate Suspension Shock Absorber Mounting Kit (Part No.906981)
from
$37.99
Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
- EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Carquest Premium – Suspension Lateral Arm (Part No.800-77986)
from
$54.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Suspension Trailing Arm (Part No.528-012)
from
$98.99
Engineered for passenger safety and rigorously tested for secure performance, this trailing arm was designed as a direct replacement for your vehicle’s original part. Industry-leading evaluation process ensures smooth ride and predictable handling.
Product Features:
See More
Product Features:
- Direct replacement – this suspension trailing arm fits and functions like the original equipment part
- Quality construction – manufactured from same materials as original equipment for safety and reliability
- Durable – protective finish for long-lasting corrosion resistance
- Quality tested – has undergone testing to ensure proper fit and performance
Monroe – OESpectrum Rear Suspension Shock Absorber Assembly (Part No.15683)
from
$129.99
Including everything you need for a complete repair, the all new Monroe OESpectrum shock & mount assembly comes with a pre-assembled upper mount, shock, compression bumper and dirt shield to simplify the installation. Designed to deliver exceptional control under most driving conditions, Twin Technology Active Control System reduces noise vibration and harshness.
Product Features:
See More
Product Features:
- SAVES INSTALL TIME – Simplifies the installation process with a preassembled upper mount, shock, compression bumper & dirt shield for a quick and easy replacement
- COMPLETE REPAIR – Premium-quality preassembled upper strut mount matches the OE design and comes with new Monroe Strut-Mate mounting components to include everything you need for the repair
- CONSISTENT RIDE – OE all-weather fluid contains special additives to assist with extreme temperatures and help reduce oil breakdown
- EXCEPTIONAL HANDLING – Full displaced valving, tuned specifically to each vehicle, adjusts to road extremes while the larger bore provides more efficient damping control to provide consistency and a smooth ride
- CONTROL AND DURABILITY – PTFE-banded piston provides consistent sealing between piston and pressure tube for better control and increased durability
- REDUCED NOISE, VIBRATION AND HARSHNESS – Twin Technology Active Control System delivers exceptional control under most driving conditions while isolating impact-related noise, vibration and harshness
- IMPROVES PERFORMANCE – Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade
- BUILT TO LAST – Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear
- BUY WITH CONFIDENCE – Comes with Monroe’s limited warranty and exclusive Feel the Difference Guarantee
KYB – Strut Mount and Bearing (Part No.SM5884)
from
$90.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Engineered And Built Specifically For The Mazda Cx-3, Cx-5, Mazda3, Mazda6, Scion IA, And Toyota Yaris IA
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
MANDO – New Complete Strut Assembly (Part No.MSS050079)
from
$104.99
HL Mando is the Original Equipment manufacturer to offer a Complete Strut Assembly to the traditional automotive aftermarket. Both ride comfort & handling performance of your vehicle will be restored to its original factory specs. Save time & energy without the need for coil spring compressor tools, choose HL Mando Complete Strut replacements – We Are OE!
Product Features:
See More
Product Features:
- Precision Engineered by OE Suspension System Manufacturer
- Tested for Quality, Durability, and Reliability
KYB – Gas Strut (Part No.338088)
from
$161.99
Ride Comfort may be important, but restoring a vehicles Ride Control, stability, stopping, lane change responsiveness and handling is critical. KYB Excel-G Shocks and Struts are designed for the most important performance purpose: Restoring the vehicles original capabilities. KYB is a world leading supplier of shocks and struts to new vehicle manufacturers and the Excel-G is made on the very same KYB OE assembly lines, uses the same OE quality components and is calibrated to restore original, designed performance, not change it. That has earned Excel-G the classification: OEA (Original Equipment for the Aftermarket). The KYB Excel-G is a nitrogen gas-charged, twin-tube design that includes every quality component that our global OEM products include and it is the preferred choice by professional technicians.
Product Features:
See More
Product Features:
- The No.1 Recommended Original Equipment Replacement Choice For Asian Cars
- The KYB Excel-G Helps Restore The Designed Control And Handling Of Your Mazda 3
- The KYB Excel-G Uses A Triple Lip Fluid Seal To Reduce The Chance Of Oil And Gas Leaking Out
- Vehicle Specific, Hand Assembled, In-House Damping Valves Correctly Manage Tire Contact, Steering Response And Body Movement
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Excel-G Helps Keep Electronic Safety Systems Performing As Designed.
- KYB Has The Strongest And Thickest Strut Bodies And Brackets In The Industry; Minimizing Flex To Maintain Correct Alignment In All Conditions
Suncore – Shock Kit (Part No.2-12S259020-001)
from
$56.99
Shock Kit
KYB – Jounce Bumper and Bellows (Part No.SB101)
from
$21.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
Whiteline – Quick Release Clamps for Strut Tower Brace (Part No.KSB790)
from
$37.99
Quick release clamps allow for quick and easy removal of strut tower braces, a must for any Whiteline strut Brace that is regularly removed so that you can work on the engine. This quick release clamp suits all Whiteline strut tower Braces.
Product Features:
See More
Product Features:
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Featuring premium polished alloy materials, Whiteline products not only make your vehicle handle better but they look great too.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Driveworks – Trailing Arm Bushing (Part No.DW-K200064)
from
$37.99
Driveworks Brand Control Arm Bushings are made to meet OE specifications. They play a role that isolate the high-frequency inherent vibration from the vehicle. Driveworks Brand chassis parts ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Replacement helps reduce vehicle noise and sway while turning
Suncore – Quick Strut Kit (Part No.2-55S11681-001)
from
$194.99
Quick Strut Kit
MOOG – Suspension Control Arm Bushing (Part No.K201933)
from
$20.49
Backed by superior materials and rigorous testing, MOOG control arm bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- HIGHLY PRECISE ENGINEERING – Optimized for quiet operation and resistance to wear, salt, road grime and oils
- PREMIUM MATERIALS – Made from high-quality materials for durability and ride performance
- OE-STYLE DESIGN – Engineered to match or exceed OE requirements
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
MOOG – Coil Spring Set (Part No.81003)
from
$132.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- 100% Load tested
- Easy to install
- Provides like-new steering
- Designed to lower stresses for longer service life
- Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment
AISIN – HEIGHT SENSOR (Part No.HSZ-001)
from
$284.99
HEIGHT SENSOR
Dorman – Position Strut Bumper (Part No.523-043)
from
$20.99
This suspension strut bumper is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment strut bumper on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Suspension Trailing Arm Bushing (Part No.K200064)
from
$31.49
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
Rare Parts – Shock Mount (Part No.RP53627)
from
$64.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
See More
Dorman – Strut Bearing and Plate (Part No.924-419)
from
$57.99
This suspension strut mount bearing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
KYB – High Pressure Monotube Gas Shock (Part No.553389)
from
$113.99
The Gas-a-just monotube shock absorber is available as an OE monotube replacement to restore your vehicles original capabilities. The KYB Gas-a-just has two separate working chambers: An air-free hydraulic piston and valve area for responsiveness and control, and a second high-pressure nitrogen gas area with a floating piston that provides a comfortable ride during normal driving and adds instant performance on demand.
Product Features:
See More
Product Features:
- The Correct, Monotube-Designed Orem Replacement
- The KYB Gas-A-Just Helps Restore The Designed Control And Handling Of The Mazda 3
- Gas-A-Just Monotubes Are Designed For Vehicles That Work, Tow, And Have Larger, Heavier Tires & Wheels
- High Pressure Monotube Design Separates The Gas And Oil For Fade Free Operation And Instant Response
- Fluid Leaking Can Be A Cause Of Shock Failure, The KYB Gas-A-Just Has An Ultra-Smooth Triple Chrome Plated Chrome Piston Rod To Reduce Seal Wear
- The Higher Gas Pressure Of The KYB Gas-A-Just Responds Quickly To Improve Steering Response
- Electronic Safety Systems Depend On The Suspension, Brakes And Tires Operating As The Vehicle Manufacturer Intended. The KYB Gas-A-Just Helps Keep Electronic Safety Systems Performing As Designed.
- To Reduce The Chance Of Noise And Vibration KYB Recommends Installing New Strut Mounts, Part Number: Sm5619
- Protect Your New Struts From Dirt, Debris And Salt With A KYB Strut Boot, Part Number: Sb125
Monroe – Strut-Mate Suspension Strut Mount (Part No.906980)
from
$71.99
Every new strut deserves a Monroe Strut-Mate Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.
Product Features:
See More
Product Features:
- PERFECT PAIRING – Ideal match for the ride control characteristics of Monroe struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
- REDUCES NOISE AND VIBRATION – Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
- REPLACES OE – Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
- RIGOROUS TESTING – Fit checked and ride tested for quality you can count on
- EASY TO INSTALL – Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily
Monroe – Strut-Mate Suspension Strut Bumper and Bellows Kit (Part No.63636)
from
$45.99
Designed to protect the strut, the Monroe Strut-Mate Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT – Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD – Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT – Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE – Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING – Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL – Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST – Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
Mazda 3 Suspension Parts Categories
Helping You Find the Right Suspension Parts for Your Mazda 3
You love your 3. So we’ve made it easier than ever to help you find Mazda 3 Suspension Parts in our online catalog. Our inventory holds 108 aftermarket and OEM Suspension Parts for your Mazda 3, ranging from $7.49 to $284.99.
We offer parts from 12 brands trusted to make quality Suspension Parts for your Mazda 3. Before you buy, take some time to read through customer reviews. We currently have 7,182 reviews of Mazda 3 Suspension Parts from previous customers. Some of the top rated parts include STRUT BOOT KIT with 4.1 stars and Strut Bellows with 3.0 stars.
Find your 3 Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Mazda 3 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Suspension Parts Brands for Your Mazda 3
Our inventory holds Suspension Parts for your Mazda 3 from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like Monroe, Dorman, and Moog, all of which can keep that Mazda happy.
We have Dorman parts available for your Mazda 3 in categories like Shocks and Struts. Some of the top-rated Dorman parts in these categories are:
Top-Rated Monroe Suspension Parts
Leading Monroe Suspension Parts
We carry Monroe brand parts for your Mazda 3 across several catalog categories, including Shocks and Struts. Some of our most reviewed Monroe parts include:
from
$24.99
(13)
Shock-Mate Suspension Shock Absorber Bellows
Shock Boots, Levelers, and Accessories
FAQs for Mazda 3 Suspension Parts
What are the most purchased Suspension Parts for the Mazda 3?
Out of 108 Suspension Parts for the Mazda 3, the most popular in our inventory are:
from
$135.99
(6)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Suspension Strut and Coil Spring Assemblies
from
$135.99
(7)
Complete Strut Assembly: Includes Strut, Coil Spring, and Mount
Front Shock and Struts
What are the top-rated Mazda 3 Suspension Parts?
Top-rated Suspension Parts for your Mazda 3 based on customer reviews/ratings are:
from
$122.99
(7)
OESpectrum Suspension Strut
“Exact replacement for my Mazda5 at half the cost of OEM. It rides like new again. Just be sure to replace the strut mounts and spring insulator at t”
