Name: Green Stripe Heavy-Duty Vulco-Flex Coolant Hose
Brand: Gates
SKU: 26522
Price: 57.99 USD

from

$57.99

Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:

Engineered to resist electrochemical degradation, the leading cause of hose failure
Built-in steel spiral wire allows for medium sized curves without kinking or collapsing
EPDM tube and neoprene lid for extended lifespan
The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
Resistant to heat, oil and ozone
Performs to SAE 20R5 Type EC Class D-2 specifications
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Warning: Do not use for fuel or oil transfer applications
Caution: Do not use for fuel or oil transfer applications.

from

$2.99

Designed for a wide range of heavy-duty truck applications where the routing is relatively straight, the Dayco straight radiator hose – H.D. is made with the highest quality woven mesh fabric reinforcement, neoprene cover and nitrile tube compounds to withstand the most corrosive elements in diesel engines. Providing protection from oil, coolants, coolant additives and heat, it has a temperature rating of -40 Deg. F (-40 Deg. C) to +212 Deg. F (+100 Deg. C).

Product Features:

Capable of withstanding extreme temperatures and high-pressure environments
Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
Not suitable for fuel or oil transfer
PLEASE NOTE: Item is sold and priced by the inch. See store for details.

from

$40.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$47.99

Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:

Designed to resist electrochemical degradation, which is the primary cause of hose failure
The built-in spiral steel wire allows for medium-sized curves without creases or folds.
EPDM tube and neoprene cover for longer lifespan
Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
Heat, oil and ozone resistant
Performs to SAE 20R5 Type EC Class D-2 specifications
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Caution: Do not use for fuel or oil transport applications.
Caution: Do not use for fuel or oil transfer applications.

from

$26.49

The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:

Meets SAE J20R4, Class D-1 requirements
Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
Provides excellent protection against external elements

from

$84.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Designed to resist electrochemical degradation, which is the primary cause of hose failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing clamps and connectors every time a new cooling hose is installed.
Warning: Do not use for fuel or oil transfer applications

from

$32.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

The specially designed materials resist collapse under vacuum.
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-formed for a good fit and to ensure perfectly sealed connections
EPDM tube; reinforced with knitted synthetic fibers; EPDM lid resistant to heat, ozone, and chemical refrigerants
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Note: Gates recommends replacing the clamps and connectors each time a new radiator hose is installed.
Caution: Do not use for fuel or oil transfer applications

from

$38.99

Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

Patented material provides peak performance at extremely prolonged operating temperatures
Heavy-duty construction resists cracking, wear, oil and heat
A special compound ensures unmatched stability, load capacity and belt life.
Unique undercord notch pattern offers increased flexibility for smaller diameter pulleys
Problem solver for failing disks
Designed to save your fleet money and reduce downtime
Compliant with RMA standards for oil and heat resistance and static conductivity requirements

from

$40.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

The fiber-reinforced rubber adds flexibility along the entire length of the belt and ensures greater lateral stability in the pulley.
Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
Resistant to oil, heat, ozone, weathering and aging for a longer belt life.
Meets or exceeds SAE J636C specifications

from

$45.99

Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material offers optimal performance at extremely high operating temperatures.
Heavy-duty construction resists cracking, wear, oil and heat
The special compound provides unprecedented flexibility, stability, load-bearing capacity, and belt life.
The unique notch pattern offers greater flexibility for smaller diameter pulleys
Problem solver for failing disks
Designed to save your fleet money and reduce downtime
It meets RMA oil and heat resistance standards and static conductivity requirements

from

$34.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

The fiber-reinforced rubber adds flexibility along the entire length of the belt and ensures greater lateral stability in the pulley.
The shape is rectified to ensure precise dimensional control of the top width and side wall for a proper fit to the pulley.
Thermally active tension cords for maintenance-free operation when the belt is properly installed and tensioned
It resists oil, heat, ozone, weather, and decay to improve belt life.
Meets or exceeds SAE J636C specifications

from

$41.99

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
Thermally active tension cords for maintenance-free operation when the belt is properly installed and tensioned
Resistant to oil, heat, ozone, weathering and aging for a longer belt life.
Meets or exceeds SAE J636C specifications

from

$31.49

Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.

Product Features:

Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
Ground to ensure precise dimensional control of the top width and side wall for proper fit to the pulley.
Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
It resists oil, heat, ozone, weather, and decay to improve belt life.
Meets or exceeds SAE J636C specifications

from

$54.99

Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

The patented material provides maximum performance at extreme and prolonged operating temperatures.
The construction resists cracking and wear, even at extreme temperatures.
A special compound offers unparalleled flexibility, stability, load capacity, and belt lifespan.
Problem solver designed for the toughest applications
It consistently outperforms other heavy-duty serpentine belts on the market
Engineered to save your fleet money and reduce downtime
Replacing the tensioner is recommended (if the vehicle is equipped with one).

from

$40.99

Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.

Product Features:

Specifically-engineered materials resist collapse under vacuum
Engineered to resist electrochemical degradation, the leading cause of hose failure
Pre-shaped to fit and ensure a perfect seal
EPDM tube; synthetic fiber knit reinforcement; heat-, ozone- and chemical coolant-resistant EPDM cover
It meets the requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
Caution: Do not use for fuel or oil transport applications.

from

$34.99

Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.

Product Features:

Designed to resist electrochemical degradation, the main cause of pipe failure
The steel wire spiral allows them to adopt multiple shapes without bending or crushing
EPDM tube and Neoprene cover for extended service life
Polyester fabric-ply reinforcement vulcanizes into shape without unnecessary strain on connections
Resistant to heat, oil and ozone
Compliant with SAE 20R5 Type EC Class D-2 specifications
temperature range Deg. F to +257 degrees F (-40 degrees C to +125 degrees C)
Warning: Do not use for fuel or oil transfer applications
Caution: Do not use for fuel or oil transfer applications.