Mack LE Belts and Hoses

Gates is a global leader in Original Equipment (OE) System Design. With a full line of tensioners globally, you can count on Gates to supply premium quality DriveAlign Automatic Belt Tensioners you can depend on.

Product Features:

• Optimized components engineered for maximum strength and durability
• The patented design ensures superior belt alignment and tension, thereby improving transmission efficiency and lifespan.
• The labyrinth-shaped seal prevents contamination of internal parts, thereby maximizing durability and lifespan.
• Long-lasting steel pulleys with dust shields to protect internal bearings from contamination
• Double-row bearings support more load and last up to 3 times longer than two individual bearings
• Round chrome-silicone torsion spring for less fatigue than coil spring designs.
• The patented damping mechanism ensures maximum stability, reduces vibrations, and extends the service life of the belt, tensioner pulley, and other auxiliary transmission components.

For heavy duty diesel engine accessory drive applications, Dayco’s HD automatic belt tensioner is designed to handle higher torque and power pulses. The heavy-duty cast aluminum body and pulley arms translate into extra strength and durability and the patented flat spring design prevents fluctuations to the tensioner body as its footprint doesn’t change when it’s under tension. This reduces the risk of belt noise and also helps avoid separation of the housing a key failure seen from competitive products. Dayco automatic belt tensioner H.D. also includes rugged pulleys with dual lifetime lubricated bearings to deliver long lasting, dependable service. Feature highly damped designs using a wave spring and a metal ring with a bonded polymeric surface that acts as a radial shock absorber for the tensioner arm while reducing contamination.

Product Features:

• Designed to prevent fluctuations to the tensioner body for longer service life.
• Reduces the risk of noise and helps avoid housing separation
• Includes pulleys with lubricated bearings for longer lasting performance
• Heavy-duty cast aluminum body and pulley arms translate into extra strength and durability

Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:

• Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
• Premium OE technology to ensure peak performance under extreme conditions
• Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity

Designed for long life in heavy duty applications, this tough, reinforced Dayco Heavy Duty Silicone Radiator Hose resists aging from heat, chemicals, oils, and other elements that attack hoses in heavy duty applications. When installed properly with special silicone clamps, this hose will give up to six times longer service life than ordinary coolant hose. Dayco’s silicone radiator hose meets the requirements of SAE J20R1, Class A, standard wall construction, and has a temperature rating of -40 Degree F (-40 Degree C) to +350 Degree F (+175 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

• When installed properly with special silicone clamps, this hose will give up to six times longer service life than ordinary coolant hose
• This silicone radiator hose has excellent resistance to aging from heat, chemicals, oils, and other elements that attack standard rubber coolant hoses in heavy duty applications
• Meets the requirements of SAE J20R1, Class A, standard wall construction
• Has a temperature range of -40 Degree F (-40 Degree C) to +350 Degree F (+175 Degree C)
• PLEASE NOTE: Priced and sold by inch. See store for details.

Extra long-lasting hose constructed with silicone rubber. Ideal for extremely high temperature service in radiator, heater and other coolant transfer hose applications. Excellent for extreme ambient and radiant temperature conditions.

Product Features:

• Distinctive blue cover
• It resists weathering, ozone, heat, and refrigerant deterioration.
• Exceeds SAE 20R1 (Class A Standard Wall)
• Temperature range: -70 Deg. F to +350 Deg. F (+56 Deg. C to +177 Deg. C)
• Note: For a maintenance-free connection, use PowerGrip SB clamps
• Caution: Do not use for fuel or oil transfer applications

Made with special silicone compounds & reinforced with a ply of braided polyester yarn, the Dayco straight radiator hose H.D. – silicone sustains up to six times longer service life than an ordinary coolant hose when installed with a Dayco lined hose clamp. It has a temperature rating of -40 Deg. F (-40 Deg. C) to +350 Deg. F (+175 Deg. C) and is designed for a range of H.D. trucking applications where routing is relatively straight.

Product Features:

• Capable of withstanding extreme temperatures and high-pressure environments
• Meets stringent OE specifications
• Designed to meet SAE requirements J20R1, Class B Tube, Class C Cover, standard wall construction
• PLEASE NOTE: Item is sold and priced by the inch. See store for details.

Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

• Meets SAE J20R4, Class D-2 requirements
• Features a high strength knitted reinforcement and synthetic EPDM rubber construction
• Resistant to standard coolants, ozone and other detrimental environmental elements
• Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
• PLEASE NOTE: Priced and sold by inch. See store for details.

Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.

Product Features:

• Meets SAE J20R4, Class D-2 requirements
• Features a high strength knitted reinforcement and synthetic EPDM rubber construction
• Resistant to standard coolants, ozone and other detrimental environmental elements
• Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
• PLEASE NOTE: Priced and sold by inch. See store for details.

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

• Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
• EPDM rubber constructions resist cracking on the rib surface
• Meets or exceeds all original equipment manufacturer specifications
• Replacing the tensioner is recommended (if the vehicle is equipped with one).
• Unique form grinding of each individual belt assures precise dimensional control.
• Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• Patented material provides peak performance at prolonged extreme operating temperatures
• The construction resists cracking and wear, even at extreme temperatures.
• A special compound offers unparalleled flexibility, stability, load capacity, and belt lifespan.
• A problem-solving tool designed for the most challenging applications
• It consistently outperforms other heavy-duty serpentine belts on the market
• Designed to save your fleet money and reduce downtime
• Tensioner Replacement is Recommended (if equipped)

Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:

• The special belt construction eliminates noise, reduces tension loss, and solves transmission problems.
• EPDM rubber constructions resist cracking on the surface of the ribs
• Meets or exceeds all specifications from the Original Equipment Manufacturer
• Replacing the tensioner is recommended (if the vehicle is equipped with one).
• Unique form grinding of each individual belt assures precise dimensional control.
• Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.

Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.

Product Features:

• Engineered to handle operating conditions with temperatures up to 130°C (266°F)
• Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
• Capable of delivering excellent performance in high torque and high power pulse applications
• Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt

Dayco’s high performance HD V-belt is one of the most innovative, top performing belts for its application. By combining raw-edge construction with a specially formulated polyester cord treatment, it offers excellent resistance to repeated flexing and protection against heat, oil and grease as well as the strength, stability and reliability required for vehicles that still need a heavy-duty V-belt.

Product Features:

• Designed for efficient power transmission to vehicle accessories in today’s trucks and buses
• Provides greater durability and flexibility – 35% stronger than all previous versions
• Features specially treated cords for added strength, stability and reliability

Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• The patented material provides maximum performance at extremely prolonged operating temperatures
• Construction resistant to cracking, wear, oil and heat
• The special compound provides unprecedented flexibility, stability, load-bearing capacity, and belt life.
• The unique notch pattern offers greater flexibility for smaller diameter pulleys
• Troubleshooter for problematic drives
• Designed to save your fleet money and reduce downtime
• It meets RMA oil and heat resistance standards and static conductivity requirements

Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.

Product Features:

• The patented material offers optimal performance at extremely high operating temperatures.
• Construction that resists cracking, wear, oil, and heat
• The special compound provides unprecedented flexibility, stability, load-bearing capacity, and belt life.
• The unique notch pattern offers greater flexibility for smaller diameter pulleys
• Troubleshooter for problematic drives
• Designed to save your fleet money and reduce downtime
• It meets RMA oil and heat resistance standards and static conductivity requirements

The Driveworks V-Belt is manufactured with top quality components to deliver the maximum power and performance on all passenger cars and light duty trucks in service today.

Product Features:

• This belt is made with bottom cogs to provide the maximum flexibility and grip required on v-belt drives
• Polyester cords provide extreme tension-holding capability for longer belt life
• The raw edge belt design delivers the maximum gripping power
• The highly engineered rubber compounds are resistant to under hood heat and ozone deterioration

Designed to replace idler and tensioner pulleys for serpentine drives in heavy-duty diesel engine applications, Dayco HD idler/tensioner pulleys are machined from high-strength steel or powdered metal material to provide excellent wear resistance under harsh environments. Dual pressed-in bearings provide long bearing life and protection against the shock loads experienced by today’s diesel trucks.

Product Features:

• Engineered for the demanding drive systems of today’s class 4-8 heavy-duty commercial trucks
• Premium OE technology to ensure peak performance under extreme conditions
• Utilizes 3D dimensional computer aided design (CAD) and finite element analysis (FEA) for optimal design and maximum structural integrity
• Meets or exceeds OE quality

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

• Constructed from steel and thermoplastic designed to strict manufacturing tolerances for high durability and quality performance.
• Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
• Original equipment quality suitable for virtually all domestic or imported vehicles in the current vehicle fleet
• Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
• Premium bearings eliminate bearing noise
• Mounting hardware included for some common applications
• Reliable operation under severe conditions

Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear & tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:

• Designed for the majority of automotive vehicle applications on the road today.
• High-quality materials help resist wear and improve belt life
• Features premium lubricated bearings to extend service life
• Meets or exceeds OE quality

This pulley is designed and engineered by Litens Automotive the inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part is made using the O.E. specified design and meets all performance and durability requirements. Heavy duty steel construction for long life and trouble-free performance. Designed for HD truck applications. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Gates is a leading manufacturer of Original Equipment (OE) idler pulleys. Gates DriveAlign(R) Idler Pulleys meet or exceed OE specifications. High quality, high strength bearings run cooler and last longer than original bearings. DriveAlign Idler Pulleys are built to last by resisting dirt, salt, and other under-hood contaminants. Designed for use on automobiles and light trucks as locked center tensioning, automatic belt tensioning and idler pulleys.

Product Features:

• Steel and thermoplastic construction designed with tight manufacturing tolerances to deliver great durability and quality performance
• Designed to last with superior resistance to dirt, salt, chemicals and other engine compartment contaminants.
• Original equipment quality that fits virtually any domestic or imported vehicle on the market
• The bearings meet or exceed Original Equipment standards with application-specific speed and load requirements, to withstand high temperatures under the bell housing
• High-quality bearings eliminate noise
• Mounting hardware included for some popular applications
• Reliable operation in difficult conditions

This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part meets all performance and durability requirements. Fits Heavy Duty truck applications including Mack. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

• Manufactured by the world’s largest Original Equipment supplier of accessory drive tensioners and pulleys.
• Heavy Duty Steel Pulley for Mack Truck Applications
• OE-spec sealed ball bearings with synthetic grease and double lip seals for long life

This pulley is supplied by Litens Automotive – inventor of the first automatic belt tensioner in 1979 and today the world’s largest supplier of Original Equipment (O.E.) belt tensioning and routing products. This pulley is produced for serpentine belt routing applications and as the pulley component on automatic tensioner applications. This pulley conforms to original equipment material, tolerances, and specifications. The part meets all performance and durability requirements. Fits Heavy Duty truck applications including the Mack LE Series. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:

• Manufactured by one of the world’s largest Original Equipment suppliers of accessory drive tensioners and pulleys.
• Heavy Duty Steel Pulley
• Precision steel stamping with close tolerance ball bearing pocket.
• Electro-deposited coating (e-coat) for superior corrosion resistance.
• Running surface designed and engineered for proper belt tracking.