Lincoln Town Car Tools
Top Lincoln Town Car Tools Categories
We carry over 17 Tools in inventory for the Lincoln Town Car. If you’re looking for aftermarket Tools for your Lincoln Town Car, check out all these categories:
Essential Lincoln Town Car Tools
Hypertech – Speedometer Calibrator Color: Recalibrate your speedometer to account for changes to tire size (Part No.3300)
from
$239.99
If you’ve installed tires that are larger or smaller than original equipment tires, or if you have installed a ring and pinion gear set with a different rear gear ratio, the Max Energy Spectrum allows you to re-program for correct speedometer readings, as well as correct part-throttle shifting. The vehicle’s computer calculates your vehicle’s speed based on the diameter of the stock tires. If you’ve installed taller or shorter tires, or changed the rear gear ratio, the vehicle’s computer doesn’t know how fast your vehicle is going. As a result, the automatic transmission may not shift correctly and the speedometer readings will not be accurate (as required by law).
Product Features:
See More
Product Features:
- Speedometer correction for multiple tire sizes
- Return back to factory settings
- Reads/Displays/Clears Diagnostic Trouble Codes (DTC’s)
- Internet updateable
- Product might not be available in all states due to local laws.
Diablosport – i3 (Part No.8100)
from
$499.99
i3
Yukon Gear – Multi-Shim Driver (Part No.56077)
from
$198.99
Yukon multi-shim driver. This shim driver tool works on a variety of applications including: – GM 7.5″, 8.2″, 8.5″, 8.6″, 12P, 12T, – Ford 7.5″, 8.8″, 9.75″, 10.25″, 10.5″, – Model 35, Dana 44HD, Dana 44 JK, and more! No return.
Product Features:
See More
Product Features:
- Carrier Multi-shim driver
- Allows for easier carrier shim installation without damaging carrier shims
Dorman – Help – Bleeder Screws 3/8-24 X 1-1/4 In. (Part No.13901)
from
$5.49
This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Wearever – Bleeder Screw (Part No.H9409-2)
from
$6.79
Brakes are designed as a system and all the parts need to work together for best performance. The Bleeder Screw clears the air out of the brake line, normally placed at the highest point of the caliper or cylinder.
Product Features:
See More
Product Features:
- Manufactured with quality materials to suppress high stress levels
- Direct replacement for a proper fit
- Corrosion resistant coating for long-lasting durability against harsh roads
- This part matches Original Equipment (OE) quality specifications
Russell – Speed Bleeder, Thread Size – 3/8-24 in. RH (Part No.639590)
from
$27.49
Russell’s wide variety of lightweight aluminum adapter fittings allow for the connection of Russell hose ends to almost any component. Adapters are offered in standard thread, metric thread and pipe thread to fit most popular oil pumps, fuel pumps, fuel f
See More
Dorman – Brake Bleeder Screw 3/8-24X 1-1/4 (Part No.484-145.1)
from
$3.49
This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Help – Bleeder Screw Assortment Kit (Part No.13949)
from
$15.99
This brake bleeder screw is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this brake bleeder screw matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this screw is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
- Contents: (2) Of Each: 1/4 in-28 X 15/16 in; 5/16 in-24 X 1 in; 3/8 in-24 X 1-1/4 in; M10-1.0 X 35mm; M10-1.5 X 30 mm
Carquest Premium – Multi-Use Connector (Part No.PTC1711)
from
$76.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Product constructed to meet all design and operating characteristics as intended by the manufacturer.
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Yukon Gear – Yoke Holder Tool (Part No.56066)
from
$159.99
Yoke holder tool, fits most yokes. 1310/1330/1350/1410/7260/7290/MR3/Toyota. No return.
Product Features:
See More
Product Features:
- Yoke holder tool
- Firmly holds pinion yoke in place allowing for easier pinion preload setting
Schrader – TPMS Ni Plated Valve Core, 100 Pack (Part No.20055-100)
from
$23.99
Schrader service components are essential for TPMS sensor installation in today’s modern vehicles. Schrader’s high-quality components and proper installation help customers stay safe on the road and save money with their TPMS-enabled vehicles. All Schrader service components are intended for one-time use only and must be replaced with every tire change. Each service component is tailored to a specific vehicle make, model, and year. TPMS sensors and service Kits are not DIY products and require appropriate expertise, knowledge, and equipment for successful service.
Product Features:
See More
Product Features:
- DIRECT REPLACEMENT: Service components are designed to replace original manufacturer parts
- DURABLE: Service components are constructed of high-quality materials to help ensure reliable performance and long service life
- SCHRADER QUALITY: Schrader is a leading global manufacturer of both OE and aftermarket TPMS sensors
- VEHICLE FIT: Each service component is tailored to a specific vehicle make, model, and year
- PROPER SERVICE: Service components are intended for one-time use only and must be replaced with every tire change
- Professional installation is strongly suggested
- The programmable sensors come blank and must be programmed using a compatible TPMS programming tool
- Once programmed, the sensor performs identically to OEM direct-fit sensors
Lincoln Town Car Tools Categories
Helping You Find the Right Tools for Your Lincoln Town Car
You love your Town Car. So we’ve made it easier than ever to help you find Lincoln Town Car Tools in our online catalog. Our inventory holds 17 aftermarket and OEM Tools for your Lincoln Town Car, ranging from $0.99 to $499.99.
We offer parts from 9 brands trusted to make quality Tools for your Lincoln Town Car. Before you buy, take some time to read through customer reviews. We currently have 4,119 reviews of Lincoln Town Car Tools from previous customers. Some of the top rated parts include Brake Bleeder Screw 3/8-24X 1-1/4 with 2.0 stars and Bleeder Screw with 1.0 stars.
Find your Town Car Tools here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Lincoln Town Car part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Tools Brands for Your Lincoln Town Car
Our inventory holds Tools for your Lincoln Town Car from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Dorman, Carquest, and Hypertech, all of which can keep that Lincoln happy.
We have Russell parts available for your Lincoln Town Car in categories like Brake Tools. Some of the top-rated Russell parts in these categories are:
Top-Rated Dorman – Help Tools
Leading Dorman – Help Tools
We carry Dorman – Help brand parts for your Lincoln Town Car across several catalog categories, including Brake Tools. Some of our most reviewed Dorman – Help parts include:
FAQs for Lincoln Town Car Tools
What are the most purchased Tools for the Lincoln Town Car?
Out of 17 Tools for the Lincoln Town Car, the most popular in our inventory are:
What are the top-rated Lincoln Town Car Tools?
Top-rated Tools for your Lincoln Town Car based on customer reviews/ratings are:
from
$3.49
(2)
Brake Bleeder Screw 3/8-24X 1-1/4
“Images show two bleeder screws, so I assumed this was two screws. Silly me. So now I have one incredibly expensive bleeder screw, rather than an avera”
from
$3.79
(1)
Bleeder Screw
“Did not fit for dodge dakota says it fits but its way too long and shot brake fluid right out of the vavle when it was all the way threaded down”
from
$6.79
(1)
Bleeder Screw
“These are supposed to fit my 2000 Altima, The bleeder screws on the car are about m7 -1. The other bleeder screws listed for my car are m10-1. I’m ”
