from

$246.99

New Platinum Pro Turbocharger Intercooler/Charge Air Cooler, 3.5 Liter V6 Ecoboost Engine

Product Features:

3.5 Liter V6 Ecoboost Engine
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$8451.99

The Edelbrock supercharger Stage 1 Street system part #1583 for 2009-10 2-Wheel Drive Ford F-150 Trucks. This kit produces excellent horsepower and torque. The core of this system is the Eaton Gen VI 2300 TVS rotating assembly with a four-lobe design with

Product Features:

478 Maximum Horsepower
504 ft-lb. Maximum Torque
7 psi Maximum Boost Pressure
Eaton TVS 2300 Rotor Type
6-Rib 3.25 in. Pulley

from

$50.99

Anchor 2972 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
For Years: 1997-2004
Weight approx: 4 Lbs

from

$25.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Product constructed to meet all design and operating characteristics as intended by the manufacturer.
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$16.99

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

from

$19.49

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$25.99

Whether you are a professional technician or a skilled do-it-yourselfer, you need easy access to Victor Reinz quality at every level of the engine all in one box and without any surprises. Protective packaging, informative labels, and state-of-the art electronic cataloging, ensure you receive precisely the gaskets and seals needed for a successful, long-lasting repair.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$23.99

Engine variable valve timing (VVT) seals are designed to provide a tight, reliable seal between the VVT solenoid and mating components. Check the product attributes to choose the right seal or seal kit for your application.

Product Features:

Direct replacement – these engine variable valve timing (VVT) seals are designed to match the fit, function and performance of the original seals on specified vehicle makes, models and years
Ideal solution – engineered to provide a tight, reliable seal between the VVT solenoid and mating components when the original seals have failed or when the VVT is serviced or replaced
Durable construction – made of quality materials for reliable performance and long service life
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$25.99

Carquest camshaft position sensors are designed to meet original equipment (O.E.) fit, form and function and are built to ensure reliable performance at a great price. Each camshaft position sensor is 100% tested to ensure proper performance and a trouble-free installation. Carquest camshaft position sensors are a cost-effective solution for your engine management repair. Carquest camshaft position sensors are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Long service life and durable performance
100% tested for proper performance
O-rings and seals are included if required
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$52.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
ENGINEERED TO PERFORM – Proprietary cork-rubber formulation
SUPERIOR SEAL – Highly conformable to accommodate for the imperfect sealing surfaces
EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted
REAL WORLD TESTED – Parts are tested on-vehicle and validated to ensure optimal performance on the road

from

$115.99

This engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles. It is engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage.

Product Features:

Direct replacement – this engine oil cooler is designed to match the fit and function of an original equipment cooler on specified vehicles
Ideal solution – engineered to help maintain proper engine oil temperature when an original cooler has failed from heat, corrosion or damage
Durable construction – designed and manufactured to strict specifications for reliable performance
Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

from

$51.99

Since 1921, Cloyes has been the trusted leader in automotive timing systems. As a critical component of the engine’s timing system, the crankshaft sprockets work in unison with the timing chain, tensioners, guides and other sprockets, to ensure precise timing. Cloyes engine timing crankshaft sprockets are precision-tooled with exact tooth geometry and a perfectly matched bore, off-set and timing index for superior fit, reliability, and long-term performance. To ensure total timing system integrity, Cloyes recommends replacing the chain along with the tensioners, guides, and sprockets during service. Trusted by professionals for over a century & backed by an industry-leading limited Warranty and technical support.

Product Features:

Features precision-tooled tooth form, bore, off-set and timing index for superior fit, reliability, and long-term performance in engine timing repairs
CAD designed and manufactured using premium materials and heat-treated for OE-level fit and function, allowing for smooth installation and reliable performance
Each part is extensively tested for function, fitment, and durability to ensure consistent quality and optimal performance, reducing the risk of comebacks
Available in application-specific kit or as a stand-alone product, offering installation flexibility and convenience
Backed by Limited Lifetime Warranty and over 100 years in engineering leadership with unmatched technical support and repair confidence in every component

from

$141.99

Product Features:

Chrome plated top ring facings for enhanced performance under demanding conditions
Second rings seat instantly, properly control inter-ring pressure to improve cylinder sealing, provide efficient piston-to-cylinder heat transfer and aid in effective oil control
Oil rings are unequalled at controlling oil; design keeps tension uniform while assuring a positive seal
In the box: compression rings, rails and oil spacer

from

$8.49

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

A-Series bi-metal aluminum alloy
Greater seizure resistance than tri-metal material
Dramatically reduces or eliminates bearing wear
Made with silicon to provide greater surface hardness
Silicon particles help polish crankshaft journal to further reduce wear during operation
Utilizes ISO & QS certified manufacturing

from

$596.99

Engineered with precision, Rotomaster New Turbochargers stand apart in the aftermarket industry. Designed for today¿s demanding engines, each unit is 100% new and undergoes rigorous triple balancing and quality validation to meet or exceed original equipment performance. Drive with confidence knowing quality and dependability come standard with every turbocharger.As experts in turbochargers, Rotomaster offers best-in-class knowledge and support. Their on-call technical support team is ready to help with installation, troubleshooting, and diagnostics so you can stay up and running with confidence.Backed by an industry-leading warranty, Rotomaster turbochargers deliver confidence and coverage you can count on.

Product Features:

Precision Dynamic Balancing: Compressor wheels, turbine shafts, and rotating assemblies are 100% dynamically balanced. Delivers smoother operation and longer turbo life.
All-New Construction: Built entirely from new components, with no remanufactured parts. Ensures consistent, trouble-free performance.
OE-Matching Fit and Performance: Engineered to meet or exceed original equipment standards. Guarantees a direct replacement that installs easily and performs like the factory unit, no guesswork required
Pre-Lubed for Protection: Includes a pre-lube syringe to prep the turbo before first startup. Minimizes installation risk by preventing dry starts, giving you peace of mind.
Complete Installation Kit: Comes with essential gaskets and mounting hardware. Saves time and ensures a smooth install with no last-minute parts runs.

from

$16.79

The only parts recommended by Ford Motor Company for Ford, Lincoln and Mercury vehicles.

Product Features:

Available for most Ford Lincoln and Mercury vehicle applications.
Specifically designed for each application for optimum performance and easy installation.
Designed to meet precise Ford O.E. engineering standards for fit, functionality and durability.
High-strength materials used for long, trouble-free service life.
Ford O-Rings provide effective sealing against water, oil, gases, chemicals and harmful contaminants.
Engineered to maintain reliable sealing under harsh conditions, including temperature and pressure extremes.

from

$7.79

Engine Piston Wrist Pin Bushing Set

from

$12.99

Melling Performance valvetrain checking springs feature a low-tension design that allows them to be installed by hand for measuring piston-to-valve clearance, rocker arm ratio, and degreeing in a camshaft.

from

$16.99

With Victor Reinz gaskets, you can be sure you are getting sealing solutions that deliver OE quality gasket technology and engineering. That is because Victor Reinz is an original equipment supplier and the trusted choice of manufacturers the world over, offering broad coverage for foreign and domestic cars and trucks. In Victor Reinz gasket sets, you get the right combination of components needed for fast, long-lasting repairs.

Product Features:

Choosing Victor Reinz assures getting OE quality parts in gaskets sets that have the coverage, contents, packaging and electronic cataloging to best meet the needs of the aftermarket.

from

$73.99

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust.

Product Features:

Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$26.99

Product Features:

DESIGNED FOR IMPERFECT SEALING SURFACES: Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
SEALING TECHNOLOGIES: Exclusive sealing innovations and technologies with proprietary materials and unique design features to ensure a superior seal for your repair
ENGINEERING EXPERTISE: Parts are designed, reviewed, validated and approved by Fel-Pro engineers through rigorous research and development
REAL-WORLD TESTED: Parts are tested on-vehicle and validated to ensure optimal performance on the road
EVERY PART FOR THE REPAIR: Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

from

$8.49

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered for the sealing repair environment
Unsurpassed quality you can trust
Validated for fit, form, and function

from

$355.99

Made In USA. Melling Engine Oil Priming Tank was developed as a way for engine builders to safely pre-prime the engine with oil prior to initial engine startup. The priming tank, when filled with clean oil and air pressure pumps oil into all of the critical areas of the new engine quickly and safely.

from

$821.99

The original camshaft phasers on Ford’s modular 5.4-liter V8 engine commonly fail from internal leaks. This timing chain kit includes a pair of upgraded Dorman OE FIX camshaft phasers, timing chains, guides, tensioners and sprocket for a complete repair.

Product Features:

Complete solution – this timing chain kit includes all of the mechanical components required to change worn timing chains when replacing the failure-prone cam phasers.
Increases durability – this kit includes a pair of patented camshaft phasers that have been redesigned to correct flaws in the original equipment phasers
Durable construction – the components in this timing chain kit are engineered to precise specifications and manufactured from quality materials
Quality tested – the parts in this kit have undergone try-on, corrosion and material testing to ensure a quality fit and long service life

from

$72.99

Product Features:

Built with premium materials and OEM-matching connectors for plug-and-play compatibility, simplifying installation
Designed for consistent oil flow control to optimize camshaft timing, improving engine response and fuel efficiency
100% production-tested for fitment, leakage, maximum oil flow, and duty cycle, ensuring reliable performance under all conditions
Includes necessary attachment bolts, gaskets, O-rings, and guaranteed fitment with OEM wiring connectors to ensure proper installation and solenoid function
Supported by Cloyes limited warranty and technical support, providing peace of mind on every repair.