Lincoln MKX Belts and Hoses

Essential Lincoln MKX Belts and Hoses

Gates – DriveAlign½ Belt Drive Idler/Tensioner Pulley (Part No.38018)

DriveAlign½ Belt Drive Idler/Tensioner Pulley

from

$25.99
Product Features:
  • Steel and thermoplastic construction designed to tight manufacturing tolerances for high durability and quality performance
  • Built to last with a superior resistance to dirt, salt, chemicals and other under-hood contaminants
  • OE-quality fit for virtually every domestic or import vehicle on the road today
  • Bearings meet or exceed OE standards with application-specific speed and load requirements, to withstand high under hood temperatures
  • Premium bearings eliminate bearing noise
  • Mounting hardware included for some popular applications
  • Reliable operation under severe conditions
See More

Dayco – Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts (Part No.89603)

Serpentine Belt Tensioner: 1 Piece, HD, Built To Outperform And Outlast OE Parts

from

$108.99
The Dayco automatic belt tensioner features Dayco’s original, patented flat spring design to provide less operating range variation. It reduces the risk of premature accessory bearing failure due to high tension and lessens the risk of belt noise and slippage – or poor performance caused by low tension. A PTFE string wound within the spring resists abrasion and dampens noise. Dayco’s tensioner is also designed with a heavy-duty cast aluminum spring case and arm, which helps resist cracking and fatigue and offers additional strength, lessening the risk of distortion. Additional premium thermoplastic rubber spring slot plugs and rubber O-ring seals help keep contaminants out and zinc coated mounting bolts resist rust.

Product Features:
  • Endures the toughest conditions while promoting quieter performance and longer life
  • Features a steel pivot tube on specific designs for enhanced stability
  • Built to outperform and outlast competitive OE parts
  • Rust resistant construction
See More

Motorcraft – Accessory Belt Tensioner Assembly (Part No.G6001411648MTR)

Accessory Belt Tensioner Assembly

from

$161.84
The Motorcraft Belt Tensioner is manufactured with premium quality in mind

Product Features:
  • Designed to provide less operating range variation under tension, helping to minimize premature failure and poor performance
  • Always application specific – no one-size-fits-all solution
  • Feature a cast-aluminum spring case and arm to resist cracking and fatigue
  • Sealed-for-life bearing helps provide long service life
  • Meets Motorcraft 10-year/150,000-mile durability specifications
  • Designed to perform in harsh underhood environment
  • Easy to install
  • Recommended by Ford Motor Company
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length (Part No.87803)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 24 Inch Length

from

$24.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 27 1/2 Inch Length (Part No.87955)

Molded Heater Hose; EPDM Rubber, 5/8 Inch Diameter, 27 1/2 Inch Length

from

$201.99
Providing reliable service in applications requiring molded hoses in small diameters, the Dayco small I.D. heater hose is designed to replace OEM coolant hoses. Made with the same bends and routing as the original assembly, this molded hose is meant to fit the vehicle precisely. The knitted reinforcement and synthetic EPDM construction provide high-strength performance and resistance to detrimental environmental elements, coolants and temperature variations of -40°F (-40°C) to +257°F (+125°C) and the “quick connect” end allows for fast, convenient installation.

Product Features:
  • Meets the requirements of SAE J20R3, Class D-1
  • Designed to meet Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Engineered as an OEM replacement
  • The knitted polyester reinforcement provides high burst strength and resists degradation from temperature extremes and moisture
See More

Dayco – Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth (Part No.89144)

Serpentine Idler/Tensioner Pulley; Direct Fit, 70 mm Diameter, 24.9 mm Smooth

from

$29.99
Dayco idler/tensioner pulleys are built with smoother surfaces and tighter dimensional tolerances, which translates to less vibration and longer belt life. In addition to stamped, forged steel and powdered metal pulleys, Dayco also designs ultra-strong plastic pulleys with specially formulated glass-filled polymers that resist wear and tear. Premium lubricated ball bearings and double high temperature seals ensure peak bearing performance, the most critical element of a pulley’s service life.

Product Features:
  • Designed for the majority of automotive vehicle applications on the road today
  • High-quality materials help resist wear and improve belt life
  • Features premium lubricated bearings to extend service life
  • Meets or exceeds OE quality
See More

Motorcraft – Motorcraft Radiator Hose (Part No.G2000415268MTR)

Motorcraft Radiator Hose

from

$149.11
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft® hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:
  • Pre-shaped hose allows easy installation
  • Ethylene-propylene diolefin monomer (EPDM) rubber-over-braid construction resists cracking, swelling and splitting
  • Recommended by Ford Motor Company
See More

Dorman – Engine Coolant Overflow Hose (Part No.626-786)

Engine Coolant Overflow Hose

from

$139.99
This replacement coolant overflow hose is engineered to match the fit and function of the original equipment overflow hose assembly. Manufactured from quality materials to withstand extreme temperature changes for a long service life..

Product Features:
  • Direct replacement – this coolant overflow hose matches the fit and function of the original equipment hose.
  • Quality materials – made of heat-resistant materials for durable performance under normal operating conditions
  • Excellent value – original equipment quality at a lower price
  • Quality tested – has undergone testing to ensure proper fit and performance
See More

Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)

Metal Line Kit for Engine Oil Coolers

from

$87.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.

Product Features:
  • Metal line kit
  • For use in engine oil cooler applications
  • Routes oil lines past exhaust manifolds
  • Provides protection where standard hoses can fail
See More

Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)

1/2" x 12' Engine Oil Cooler Hose

from

$48.49
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.

Product Features:
  • Engine oil cooler hose
  • Size: 1/2″ x 12′
  • Designed for engine oil applications
  • 12′ hose length accommodates most applications
See More

Litens – Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter (Part No.900125A)

Idler/Tensioner Pulley: Direct Fit, Thermoplastic, 70mm Diameter

from

$29.99
Litens Automotive is the original equipment (O.E.) supplier for this application. This genuine Litens replacement pulley is also manufactured by Litens, the world’s largest supplier of original equipment power transmission products. Heavy duty thermoplastic pulley construction ensures long life and trouble-free performance. This pulley meets or exceeds all original equipment fit, form, and performance characteristics. For maximum performance and durability, always use genuine Litens components. Litens is the world’s largest supplier of original equipment (O.E.) power transmission products. At Litens, we design systems that are more efficient, resulting in tangible fuel economy/emissions benefits. Litens holds over 2000 patents and continues to respond to the ever-changing automotive industry by investing heavily in new technology, facilities, and people. 90% of our line is made of products coming from the OE manufacturer, which makes the Litens Tensioning Products portfolio the purest OE tensioning line in the North American aftermarket.

Product Features:
  • Heavy duty thermoplastic pulley construction
  • OE-spec sealed ball bearings with synthetic grease and double lip seals for long life
  • Installation instructions included
See More

Motorcraft – PCV Hose (Part No.B2150671618MTR)

PCV Hose

from

$44.98
The Motorcraft PCV Hose is an OES replacement component that provides the same performance, durability, and service life as your factory original equipment.

Product Features:
  • OES replacement part for your vehicle’s original factory component
  • Offering the quality, reliability, and durability of OES
  • Manufactured to OES specification for fit, form, and function
See More

Dayco – Stretch Serpentine Belt; 36.22 Long, 4 Rib Count, Zip Tie Required (Part No.4PK920EE)

Stretch Serpentine Belt; 36.22 Long, 4 Rib Count, Zip Tie Required

from

$24.99
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion and flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:
  • Designed for two- to four-point drives that do not require automatic or manual tensioning
  • Provides self-tensioning capabilities required by specific OE drives designed for a ‘stretch’ belt
  • Elasticity allows for long-lasting performance and proper tension
See More

Gates – Micro-V« Serpentine Drive Belt (Part No.K060448)

Micro-V« Serpentine Drive Belt

from

$27.49
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.

Product Features:
  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Tensioner Replacement is Recommended (if equipped)
  • Unique form grinding of each individual belt assures precise dimensional control.
  • Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
See More

Dayco – Stretch Serpentine Belt; 36.93 Long, 4 Rib Count, Zip Tie Required (Part No.4PK938EE)

Stretch Serpentine Belt; 36.93 Long, 4 Rib Count, Zip Tie Required

from

$14.29
Dayco ela self-tensioning belts incorporate a wear-resistant EPDM rib material, along with a highly elastic EPDM cushion rubber that surrounds the polyamide tensile cord, thus providing the required adhesion & flexibility to maintain lasting performance. The backbone behind the Dayco ela self-tensioning belt is its polyamide tensile member, which allows the high elongation required for installation, yet provides the proper tension maintenance properties to transmit the accessory loads demanded for the drive.

Product Features:
  • Designed for two- to four-point drives that do not require automatic or manual tensioning.
  • Provides self-tensioning capabilities required by specific OE drives designed for a stretch’ belt
  • Elasticity allows for long-lasting performance and proper tension
  • Elasticityáallows for long-lasting performance and proper tension
See More

Bando – Drive Belt (Part No.W1000367228BAN)

Drive Belt

from

$20.88
Bando has been manufacturing rubber products for over 100 years. Bando is the OEM supplier to over 80 percent of the top 10 cars sold in the U.S. (by volume). Bando belts are made with EPDM rubber which adheres to OEM specification that is more heat resistant and long lasting. With 19 plants worldwide, Bando are the 3rd largest manufacturer of automotive drive belts in the world. Bando’s automotive belts, serpentine, timing and V-belts are engineered to meet the unique requirements of today’s high performance engines for applications that run the gamut from international racing teams to light duty trucks. Bando manufactures belts for the world’s leading automakers, supplying both OEM and aftermarket applications, all to the same exacting standards of quality.

Product Features:
  • Designed to provide the positive no-slip drive requirements needed on demanding overhead cam applications
  • Precision molded teeth are protected by durable fabric facing for long life
  • Tensile cord is engineered and tested for maximum load carrying capabilities
  • Rubber backing resists abrasion, oil and heat
See More

Bando – Drive Belt (Part No.W10002440745BAN)

Drive Belt

from

$24.70
Drive Belt

Motorcraft – Multi-Rib (Serpentine) Belt (Part No.W1000681310MTR)

Multi-Rib (Serpentine) Belt

from

$40.85
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) belts, they are the only belts recommended by Ford Motor Company. Installation Note: The manufacturer recommends checking and/or replacing idler and tensioner bearings when replacing the serpentine belts

Product Features:
  • Polyester cords resist stretching, minimize slippage and provide excellent performance with short adjustment drives
  • Laminated die-cut edge design provides quiet, efficient operation
  • Stands up to grease, oil, dirt and high temperatures
  • Flexes easily around the smallest pulley
  • Helps preserve belt strength
  • Helps eliminate rough edges present on cut-cog designed belts
  • Provides quiet operation
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.50" Diameter (Part No.E72455)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 24" Long, 1.50" Diameter

from

$59.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Motorcraft – Motorcraft Radiator Hose (Part No.G2000415270MTR)

Motorcraft Radiator Hose

from

$99.14
The Motorcraft rubber goods line, including belts and hoses, combines quality materials and design excellence that promote product integrity and customer satisfaction. Manufactured with the right lengths and widths to replace original equipment (OE) hoses, they are the only hoses recommended by Ford Motor Company. Motorcraft® hoses offer long-lasting quality – Ethylene-propylene diolefin monomer (EPDM) rubber used in most underhood hoses resists heat, oil, grease, antifreeze and all approved coolant additives.

Product Features:
  • Pre-shaped hose allows easy installation
  • Ethylene-propylene diolefin monomer (EPDM) rubber-over-braid construction resists cracking, swelling and splitting
  • Recommended by Ford Motor Company
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25" Long, 1.50" Diameter (Part No.E72456)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25" Long, 1.50" Diameter

from

$119.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25" Long, 1.50" Diameter (Part No.E72454)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 25" Long, 1.50" Diameter

from

$161.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Suncore – Shock Kit (Part No.2-12S252310-001)

Shock Kit

from

$79.99
Shock Kit

Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27.5" Long, 1.50" Diameter (Part No.E72453)

Curved Radiator Hoses: EPDM Rubber, Standard Duty, 27.5" Long, 1.50" Diameter

from

$78.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.

Product Features:
  • Meets SAE J20R4, Class D-1 requirements
  • Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
  • Provides excellent protection against external elements
See More

Helping You Find the Right Belts and Hoses for Your Lincoln MKX

You love your MKX. So we’ve made it easier than ever to help you find Lincoln MKX Belts and Hoses in our online catalog. Our inventory holds 45 aftermarket and OEM Belts and Hoses for your Lincoln MKX, ranging from $13.99 to $201.99.

We offer parts from 12 brands trusted to make quality Belts and Hoses for your Lincoln MKX. Before you buy, take some time to read through customer reviews. We currently have 6,923 reviews of Lincoln MKX Belts and Hoses from previous customers. Some of the top rated parts include Poly Rib Belt Serpentine Belt; 67.91 Long, 6 Rib Count with 3.7 stars and Stretch Serpentine Belt: 36.1 "Long, 4 Rib Count, Engineered For High Mileage with 3.0 stars.

Find your MKX Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Lincoln MKX part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Belts and Hoses Brands for Your Lincoln MKX

Our inventory holds Belts and Hoses for your Lincoln MKX from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco, Litens, and Driveworks, all of which can keep that Lincoln happy.
We have ContiTech parts available for your Lincoln MKX in categories like Serpentine and V Belts. Some of the top-rated ContiTech parts in these categories are:
Multi Rib (Serpentine) Belt
from $21.91
(1)
Multi Rib (Serpentine) Belt
V-Belts

Top-Rated Dayco Belts and Hoses

Leading Dayco Belts and Hoses

We carry Dayco brand parts for your Lincoln MKX across several catalog categories, including Serpentine and V Belts. Some of our most reviewed Dayco parts include:
Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count
from $28.99
(54)
Poly Rib Belt Serpentine Belt; 45.08 Long, 6 Rib Count
Serpentine Belts

FAQs for Lincoln MKX Belts and Hoses

What are the most purchased Belts and Hoses for the Lincoln MKX?

Out of 45 Belts and Hoses for the Lincoln MKX, the most popular in our inventory are:
Accessory Drive Belt Tensioner - Original Equipment Quality
from $97.99
(12)
Accessory Drive Belt Tensioner – Original Equipment Quality
Belt Tensioner Assemblies

What are the top-rated Lincoln MKX Belts and Hoses?

Top-rated Belts and Hoses for your Lincoln MKX based on customer reviews/ratings are:
Poly Rib Belt Serpentine Belt; 67.91 Long, 6 Rib Count
from $43.99
(3)
Poly Rib Belt Serpentine Belt; 67.91 Long, 6 Rib Count
“Good reliable replacement belt.”
Stretch Serpentine Belt: 36.1 "Long, 4 Rib Count, Engineered For High Mileage
from $13.99
(2)
Stretch Serpentine Belt: 36.1 "Long, 4 Rib Count, Engineered For High Mileage
“Fits & functions correctly; shape of the ribs may allow the belt to grip the pulleys better/longer than other belts.”