Lincoln MKC Engine Cold Air Intakes

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes.

Product Features:

• Guaranteed to increase horsepower and torque
• Powder-coated aluminum intake tube paired with dry synthetic air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 50,000 miles under normal highway driving conditions
• Typical installation can be completed in 90 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• HIGH QUALITY: Made in America.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• Will not void vehicle warranty(limited)

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake system comes with a washable, reusable low restriction Spectre air filter, polished aluminum intake tubing and a black powder coated 2-piece heat shield to help prevent heated engine air from entering the intake inlet. Spectre air intakes come with velocity stack, coupler, stainless steel clamps, edge trim, and all necessary hardware for an OE fit and finish. The air filter mounts on the driver side.

Product Features:

• DESIGNED TO INCREASE HORSEPOWER AND TORQUE: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
• BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response
• IMPROVED ENGINE SOUND: Hear the power under the hood
• WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants and debris
• EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
• EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools- Spectre air intake systems are one of the easiest ways to increase horsepower
• HIGH PERFORMANCE AIR FILTER: Advanced oiled synthetic filter design helps protect your engine against damaging contaminants
• Will not void vehicle warranty(limited)

The AIRAID Cold Air Dam (CAD) Air Intake is engineered to give your engine larger amounts of cooler air to produce more horsepower And torque. The intake system retains the original location of the air filter but delivers a big boost with the addition of a huge open-element air inlet protected by Cold Air Dam panels that help to provide a steady, free-flowing supply of cooler outside air into your engine. The panels mount in the factory air box location And utilize any factory cold air inlet ducts that are present, while adding additional cold air passages to the filter. The panels also keep the filter isolated from the hot engine compartment air by sealing to the underside of the hood via blade-style weather stripping. This CAD system utilizes a replacement low-restriction intake tube. The 360-degree conical AIRAID premium air filter is washable And reusable, less restrictive than traditional paper, And assures superior filtration. The AIRAID Cold Air Dam Air Intake is easy to install with common hand tools. Some AIRAID air intakes are not legal for sale or use in California And other states adopting California emission standards, while others are 50 state legal. View the product’s vehicle applications to determine the legal status for each vehicle.

Product Features:

• Bolt-On
• Increased Fuel Efficiency/Torque/Horsepower
• Large One Piece Roto-Molded Cold AirBox
• Massive Air Inlets For More Cold Air Ingestion
• Exclusive SynthaFlow technology
• Seals Directly To The Hood
• Lifetime No Hassle Warranty(limited)

This sealed intake system utilizes pre-oiled, large 7″ tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Also included is a Magnum SHIELD Pre-filters to protect your performance air filter from water splash or heavy rainstorms. Dual Mandrel-bent Wrinkle-black Powder-coated aluminum intake tubes are designed with an H-pipe to balance intake tube pressure and maximizes airflow and velocity. aFe developed this wrinkle-black powder-coated aluminum heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. An aluminum cover is used to finish off this intake and add a sense of style to your engine bay.

Product Features:

• Outflows Factory Intake By 92%
• Mandrel Bent Wrinkle-Black Powder Coat Intake Tubing
• Utilizes Stock Mounting Locations
• Alum. Cover To Add Sense Of Style To Engine Bay

Dual Large 5-Layer Performance Air Filters: This sealed intake system utilizes pre-oiled, large 7″ tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Top Mounted Heat Shield Design: aFe developed this wrinkle-black powder-coated aluminum heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. Large Dual 3-1/2″ Intake Tubes: Dual Mandrel-bent Wrinkle-black Powder-coated aluminum intake tubes are designed with an torque H-pipe to balance intake tubes. Hassle-Free Installation: All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Product Features:

• Outflows Factory Intake By 92%
• 3.5 in. Powder-Coated Aluminum Intake Tube
• Wrinkle-Black Finish
• Alum. One Piece Heat Shield Utilizes Stk. Mounting Locations

Dual Large 5-Layer Performance Air Filters: This sealed intake system utilizes pre-oiled, large 7″ tall radial flow performance air filters with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. Top Mounted Heat Shield Design: aFe developed this wrinkle-black powder-coated aluminum heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. Large Dual 3″ Intake Tubes: Dual Mandrel-bent Wrinkle-black Powder-coated aluminum intake tubes are designed with an H-pipe to balance intake tube pressure and maximizes airflow and velocity Hassle-Free Installation: All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Product Features:

• Outflows Factory Intake By 71%
• 3 in. Mandrel Bent Aluminum Intake Tubing
• Wrinkle-Black Finish
• 1-Piece Powder coat Heat Shield Utilizes Stock Mounting Locations

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air box replaces restrictive stock air box and ensures a consistent supply of cold fresh air; built-in ram scoop forces cold, outside air to filter. Precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

• Uses Pro 5R Filter For Maximum Air Flow
• Rotomolded Plastic Tube For Maximum Air Flow
• 69% cfm Flow Gain
• Improved Throttle Response

High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Top Mounted Heat Shield Design: aFe developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. Large Air Filter: Large 5-3/4″ Inverted Top Conical Filter with a 5-1/2″ flange opening provides greater airflow over Stock intake system. This washable/reusable 3-layers of synthetic media providing maximum airflow and performance. Hassle-Free Installation: All clamps, silicone coupling, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Note: This product is not currently CARB exempt and is not available for sale in California or for use on any vehicle registered with the California Department of Motor Vehicle.

Product Features:

• Outflows Factory Intake By 68%
• 3 Layer Cotton/Synthetic Gauze Media
• Powder coat 1-Piece Heat Shield Utilizes Stock Mounting Locations
• CAD-Designed Roto-Molded Intake Tube

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

• Uses Pro 5R Filter For Maximum Air Flow
• Rotomolded Plastic Tube For Maximum Air Flow
• 53% cfm Flow Gain
• Improved Throttle Response

57-series OEM air box intake systems include a washable, reusable High-Flow Air Filter paired with a CAD-designed high airflow intake tube, and is designed to be a simple, cost-effective performance upgrade. The included oiled cotton filter is a direct replacement for your factory filter, drops easily into the factory air box, can go up to 100,000 miles between filter services under normal highway driving conditions, and offers K&N’s industry-leading engine protection. Each 57-series OEM air box intake system is designed for specific vehicle applications to ensure a precise fit, and can typically be installed in less than 60 minutes with only standard hand tools. Buy with confidence under the K&N No-Hassle Lifetime Limited Warranty. Legal in all 50 States.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with a direct replacement High-Flow Air Filter
• Designed to improve throttle response and engine sound
• Engineered to provide high airflow and exceptional filtration
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• 50 State legal