from

$18.29

Fixing a broken automatic transmission shift cable usually requires replacing the entire cable assembly. This 4-piece assortment of Dorman OE FIX shift cable replacement bushings saves expense by allowing the replacement of just the failed bushing.

Product Features:

Convenient solution – this shift cable bushing assortment directly replaces a broken bushing and eliminates the need to replace the entire cable assembly
Save time and money – save the expense and significant installation time of replacing an entire cable assembly
Ensure fit – this bushing assortment is vehicle-specific and precision-engineered for specified General Motors, Chrysler and Saab models and years
Trustworthy quality – designed in the United States and backed by more than a century of automotive aftermarket excellence

from

$90.99

ATHARNESS VSS REPR

from

$73.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest Premium electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$79.66

AT Solenoid

from

$2213.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2466.99

Our Remanufactured Transmissions include torque convertors, trans is completely dismantled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.

from

$2361.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2139.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2139.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2239.99

(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$1929.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2239.99

(PDT)Premium Drivetrain Transmissions are remanufactured to original equipment (OEM) demanding specifications by an OEM builder. Each transmission assembly is manufactured with the highest technology equipment, the most intelligent engineering support, and the best practices available in remanufacturing today.

Product Features:

All transmissions are completely disassembled and cleaned. All cases are media blasted. Internal parts are inspected for wear or damage and replaced as required. All bushings are inspected and replaced as required.
100% of friction components are replaced with upgraded heavy duty parts.
Drum assemblies are air checked and side play is checked to assure proper clearance. 100% of seals, o’rings and gaskets are replaced.
100% of solenoids are checked and replaced if they do not pass duty cycle tests. Internal wiring harness are checked and replaced as necessary. Valve bodies are disassembled, cleaned, and measured for wear. Valve body valves and valve bores are inspected and valve bores are machined as required. Completed valve bodies are tested for proper operation prior to dyno testing.
Transmissions are assembled, end plays are set and fasteners are torqued to the required specification.
Torque Converter: 100% of converters are dynamic balanced. 100% of pumps are furnaced brazed. 100% new bearings and o’rings. 100% new springs and rollers in stator. 100% new thrust washers. 100% new friction liners in overdrive lockup converters.
100% of transmissions are dynamometer tested to ensure proper pressures and shift quality throughout the operating range. All upshifts and downshifts are checked against preset parameters. Torque converter stall speed and lockup is verified on the dyno
Product might not be available in all states due to local laws.

from

$1879.99

Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road.

Product Features:

Product might not be available in all states due to local laws.
We are committed to remanufacturing transmissions to the same stAndards And methodologies used for OEM transmissions
Each Moveras transmission is produced in a World Class manufacturing facility
Our entire process has been developed from scratch, utilizing LEAN manufacturing principles
Our transmissions are produced in a Clean Room environment
Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

from

$2139.99

At Shift Pro Inc, fully remanufactured transmissions go beyond the name. So, what’s in that name to start? Pro Engineering: your transmission has been re-engineered to meet or exceed OE standards for tolerances, durability, and quality. Pro Performance: upgraded components and a fully remanufactured torque converter add to enhanced durability over your transmission’s lifetime. Pro Performance: hot-, cold-, load-, and simulated road-tested on custom dynamometers, your transmission is ready to go, wherever you’re headed.

Product Features:

Fully tested torque converter included. Shift Pro Inc tests for leaks, lock-up, concentricity, and balance to eliminate the possibilities of front seal leaks, premature bushing wear, and vibration.
All dynamometer testing is conducted with Shift Pro Inc’s custom testing program for at least 30 minutes.
During dynamometer testing, Shift Pro Inc transmissions are cold, hot, load, and road tested using a fully synthetic transmission fluid and filtration system.
All wear-prone valves in the completely remanufactured valve body are restored to stringent specifications and vacuum tested to verify proper function.
Shift Pro Inc’s quality control process includes build specification checks performed by four different specialized technicians during the remanufacturing process.
No paperwork or registration is required with Shift Pro Inc’s warranty. Each no-hassle warranty is attached to the vehicle VIN and transferrable with ownership.
Product might not be available in all states due to local laws.

from

$2361.99

While we do not sell this item online, it can be ordered from one of our 3,500 store locations. Please see our Store Locator to find the store nearest you. Please note: Online promotions and discounts are not applicable to this item. Moveras Remanufactured Transmissions manufactures automatic transmissions for virtually every vehicle on the road. We are committed to remanufacturing transmissions to the same standards and methodologies used for OEM transmissions. Each Moveras transmission is produced in a World Class manufacturing facility. Our entire process has been developed from scratch, utilizing LEAN manufacturing principles. Our transmissions are produced in a Clean Room environment. Every transmission is built to the same exacting standards by using a precisely documented and controlled process.

Product Features:

Product might not be available in all states due to local laws.

from

$2445.99

Our Remanufactured Transmissions include torque convertors, trans is completely dismantled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.

Product Features:

Our Remanufactured Transmissions include torque convertors, trans is completely disassembled & checked then reassembled to spec for tolerances, vacuum, seal & balance, all wear parts replaced & sim tested.
If we have important installation information it will be included on tags or in the paperwork packaged with your transmission.
Transmissions are securely packaged in a recyclable container that will also protect your core on the return trip. Our nationwide warehouse network means speedy delivery.
All of our transmissions are Dyno tested to ensure the highest standard of trouble free service and longevity.