Lincoln Axle Hubs

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

• Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
• Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
• Special bearing seals to help keep out contaminants, the number one cause of bearing failure
• Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
• Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
• Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
• Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
• Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
• Integral bearing races specifically designed to each application, no one-size-fits-all solution
• Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
• Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
• Original equipment specifications minimize any possibility of the hub cracking
• Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
• Tapered roller bearings for high load rates when specified

FEQ manufactures OE quality wheel hub assemblies that provide heavy duty performance, improved fuel economy and reduced weight. FEQ wheel bearing hubs are maintenance free – fully lubricated and sealed for life.

Product Features:

• Integrated sensors and electronics for reliable function
• Factory sealed assembly eliminates contamination
• No need for pre-load adjustment at assembly
• Compact and lightweight
• Minimizes axial space requirements

Timken Wheel Hub Assembly is a single integrated unit that can be bolted directly onto corners, eliminating the need for conventional components like washers, spacers and nuts. Its design provides for lower total system cost, improved performance, reduced weight and lower warranty costs. The Formed Hub utilizes fewer components over conventional 4 x 2 designs, simplifying installation and reducing costs.

Product Features:

• Allows the same configuration to be used on driven and non-driven wheels, replacing the conventional 4×2 (dead) spindle.
• Features an advanced sensor and sensor technology for superb performance.
• Holds bearing setting more consistently than traditional thread and nut designs. The resulting system stiffness reduces rotor run-out and improves brake performance.
• Reduces weight by up to 20% per assembly compared to conventional wheel end solutions.
• Features an active sensor capable of sensing down to zero speed. Sensor’s speed information can be used for vehicle dynamics control systems, speed control, speedometer, odometer, trip computer and other purposes.
• Internally-mounted sensor protects against the elements, which ultimately reduces warranty costs. SENSOR-PAC also utilizes very small sensor-to-target wheel gaps, enabling a much smaller and more cost- effective sensor.
• Includes an internally-mounted sensor that protects against debris, corrosion, thermal shock, and other hazards that threaten externally-mounted sensors.
• Designed for superior performance in a minimal space. Timken engineers have packaged the sensor within the bearing without increasing overall dimensions to promote high performance and equal load carrying capacity in a minimum space.

FEQ manufactures OE quality wheel hub assemblies that provide heavy duty performance, improved fuel economy and reduced weight. FEQ wheel bearing hubs are maintenance free – fully lubricated and sealed for life.

Product Features:

• Integrated sensors and electronics for reliable function
• Factory sealed assembly eliminates contamination
• No need for pre-load adjustment at assembly
• Compact and lightweight
• Minimizes axial space requirements
• No need for lubrication replenishment Increased bearing life Installation Note: Some bearings contain active wheel sensors. These wheel sensors normally work together with magnetic ABS sensor rings. These sensor rings have a magnetic north and south poles lying next to each other in its circumference. These magnetic poles must always lie opposite the wheel sensor. If, the wheel bearing is installed improperly, the system wheel sensor and magnetic sensor gear cannot supply a signal making the ABS system inoperable. The ATE Test Card for Magnetic Sensor Gears will assist in prevention of these errors. PN# 760130 ATE

Application-Specific Engineering Design to ensure the correct fit, function and high performance of the hub unit. Each BCA hub assembly is engineered to the OE design and specification for its make and model. Then, each hub goes through rigorous testing to ensure that the part performs to BCA’s exacting standards. Application-Specific, OE-Style ABS Plugs and Sensors to ensure proper connection and performance. Each sensor on BCA hubs is verified with the OE specs to ensure proper functionality of the ABS module on the vehicle. Components Made with Premium Quality Materials to ensure that our customers receive a robust, durable product. These components include forged steel rings, seals, precision cages, rolling elements, grease and hub bolts.

Product Features:

• Forged Steel in the inner and outer rings must meet BCA’s stringent steel quality specifications, which optimizes bearing life.

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

• Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
• Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
• Special bearing seals to help keep out contaminants, the number one cause of bearing failure
• Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
• Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
• Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
• Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
• Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
• Integral bearing races specifically designed to each application, no one-size-fits-all solution
• Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
• Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
• Original equipment specifications minimize any possibility of the hub cracking
• Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
• Tapered roller bearings for high load rates when specified

Original equipment-specification hubs and bearings for Ford and Lincoln vehicles. Ford Parts hubs are micro-ground to help ensure the smoothest possible interface for nesting/mating with the rotor. Any runout wobble or imperfection on the rotor mounting surface of a hub, such as some found in the aftermarket, can be magnified by two times in the brake pad and cause premature wear and comebacks.

Product Features:

• Testing, engineering and manufacturing tolerances held to 25 microns – three times thinner than a piece of paper – compared with some competitors at 250 microns
• Optimized sealing effect and a low torque-to-turn ratio to minimize drag and help increase fuel economy
• Special bearing seals to help keep out contaminants, the number one cause of bearing failure
• Proprietary technology in the design and assembly process, where applicable, that is difficult to reverse engineer, helps ensure quality and helps reduce comebacks
• Patented micro-grinding process, where applicable, that helps ensure the smoothest possible hub and rotor interface while helping to avoid premature brake wear and vibration
• Helps avoid costly comebacks from pad, rotor or suspension parts problems that aftermarket replacement hubs may contribute to
• Meets original equipment test specifications for each specific application Ford Parts hubs don’t compromise quality
• Triple-sealed bearing assembly lubricated-for-life original equipment hub units provide excellent sealing performance
• Integral bearing races specifically designed to each application, no one-size-fits-all solution
• Precision forging Materials, engineering and production processes minimize any possibility of the hub cracking
• Micro-ground hub-to-rotor mating surface – tolerances held below 25 microns to help prevent noise and vibration
• Original equipment specifications minimize any possibility of the hub cracking
• Original equipment ABS sensor ring and sensor pigtail feature high-strength polymer and copper wiring for positive connections and conductivity, providing excellent ABS signal
• Tapered roller bearings for high load rates when specified