Lexus RX350 Air Conditioning Parts

New Platinum Pro A/C Condenser, 3.5 Liter Engines

Product Features:

• 3.5 Liter Engines, Made Of Aluminum
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

New Standard Replacement A/C Receiver Drier And Desiccant Element

Product Features:

• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

This air conditioning compressor flow sensor matches the fit and function of the original equipment sensor to restore proper function to the A/C system on specified vehicle applications.

Product Features:

• Cost-saving solution – this sensor allows only the failed component to be replaced without the cost of replacing the entire A/C compressor
• Durable construction – this flow sensor is made of quality materials and components for reliable service
• Extensively tested – this motor has undergone fit and performance testing to ensure a quality fit and long service life
• Trustworthy quality – backed by team of engineers in the United States

A/C Pressure Switch

The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:

• Designed and manufactured with high quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
• Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your A/C Pressure Sensor.
• All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
• All units are tested using automated end-of-line testing equipment that pressurizes the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging

Save time on installation with everything you need in one box for an air conditioning replacement. The Carquest Premium A/C Compressor and Component Kit includes the necessary compressor, accumulator/receiver drier, and orifice tube/expansion valve, along with the necessary O-rings, gaskets, and oil. The parts are manufactured with strict quality standards from Gilmore, a climate control partner to Advance Auto Parts for over 25 years.

Product Features:

• Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
• New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
• The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
• All new compressors must pass a helium leak test and pump up function test prior to packaging.
• Accumulators and receiver driers meet or exceed original equipment standards for moisture absorption, pressure and temperature resistance, air tightness, vibration resistance, corrosiveness, and pulse pressure.
• Desiccant is 100% tested and assembled in a controlled environment to ensure performance meets or exceeds original equipment standards.
• All accumulators are helium leak tested prior to packaging.
• Each orifice tube and expansion valve is tested for function and leakage according to OEM specifications to ensure optimal performance of the air conditioning system.
• The specific PAG oil required by your vehicle application is included.
• O-rings and gaskets for all parts are application specific and packaged with the correct part to save time and eliminate the possibility of a leak from using the wrong O-ring or gasket.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

Carquest Hose Assemblies are designed to carry refrigerant in an air conditioning system. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

• 100% of hose assemblies use Goodyear hoses that meet original equipment specifications for wall thickness and permeation.
• Tubes and mufflers are designed to meet original equipment specifications for wall thickness.
• Fittings are designed to couple and seal to eliminate leaks. Trivalent plating is used on steel fittings to enhance corrosion resistance. The fittings conform to original equipment specifications to allow for the proper fit with related air conditioning
• Welds and crimps meet and exceed original equipment tension specifications.
• Manufactured to allow flexibility in the hose to conform to engine compartments.
• O-Rings necessary for installation are included.

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

• Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
• New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
• The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
• All new compressors must pass a helium leak test and pump up function test prior to packaging.
• O-Rings and gaskets necessary for installation are included.
• O-Rings and gaskets necessary for installation are included.

New Standard Replacement A/C Compressor, 6 Groove, V6 Engine

Product Features:

• 6 Groove, V6 Engine
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

High quality OE replacement part with all components needed to complete the job

Product Features:

• All the seals needed to complete the job
• Compatible with both R134a and R12 refrigerants
• Application specific
• SUV and rear air applications

Carquest New Compressors are designed, manufactured and tested to meet or exceed strict original equipment specifications for superior quality and performance. Each new compressor is tested to provide durable life to the vehicle’s air conditioning system. All new compressor components are assembled using state of the art equipment and techniques to ensure smooth operation. Each part is equipped with a clutch and connector that matches the original equipment part and provides an exact replacement to your vehicle’s part. All compressors are supplied with the necessary gaskets and o-rings for installation.

Product Features:

• Each new compressor design undergoes rigorous life cycle testing at high RPMs and pressures to ensure that they can withstand years in the harshest conditions.
• New compressors are designed with utmost precision using 3D coordinate measuring machines to ensure a perfect fit.
• The production process contains automated controls at every stage that alerts and halts production in case of an error, assuring that the finished product will always be flawless.
• All new compressors must pass a helium leak test and pump up function test prior to packaging.
• O-Rings and gaskets necessary for installation are included.
• O-Rings and gaskets necessary for installation are included.

Carquest Standard compressors offer reliable, long-lasting performance for a leak-free, dependable repair.

Product Features:

• Built in a TS16949 certified manufacturing environment to ensure consistent quality that meets or exceeds OE specifications for fit, form, function and durability
• All remanufactured compressors are built using the latest compressor technology available today and using strict remanufacturing processes
• All units have new seals, O-rings, gaskets and clutch bearings
• Tested for noise, vibration, durability, vacuum decay and pressure decay to ensure no leaks and longer life

Denso manufactures an A/C Expansion Valve that is the same quality fit and performance of the OE Expansion Valve it replaces.

Product Features:

• OEM Quality and Direct fit Application
• Designed to the exact OEM specifications

Denso manufactures an A/C Expansion Valve that is the same quality fit and performance of the OE Expansion Valve it replaces.

Product Features:

• OEM Quality and Direct fit Application
• Designed to the exact OEM specifications

The Carquest condenser is an integral component of the motor vehicle air conditioning system. This part condenses the refrigerant into a liquid to prepare it for entry into the compressor. The condenser is manufactured according to OEM design specifications to ensure a long life with quality performance. Exact design standards produce a seamless fit into the engine compartment.

Product Features:

• This is a parallel flow condenser that contains small micro-channels. It is highly recommended that this condenser be replaced if a failure has occurred in the vehicle’s air conditioning system that has resulted in debris contaminating the system. This
• This Carquest condenser has a drier attached to it with an interior desiccant bag which will provide optimal moisture removal in the a/c system to maximize cooling performance.
• The Carquest condenser production process includes quality driven details such as using zinc-coated tubes and electrostatic paint spray at high temperatures to provide the best corrosion resistance and durability in our condensers.
• Continuous molds, laser welding machines, semi-automatic assembly stations and other advanced equipment provide quality products.
• Each condenser uses only the highest quality raw materials including pure aluminum (not substandard or recycled) to provide the highest quality standards from beginning to finished product.
• All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
• We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak.
• Our condensers are manufactured from rigid design standards to fit OEM dimensions.
• Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
• Each Carquest condenser is packaged using superior box construction. This box is easy to open and seal. Each condenser is packaged in the box with internal protection to keep the part centered and away from the package edges. The package passes the fre
• All brackets are designed per OEM specifications to ensure strength and reduce vibration and movement.
• We leak test 100% of our condensers in helium leak test chambers to ensure the product does not leak. This industry leading process is the most precise method and can detect even the smallest leak. The leak-free condenser is then charged with nitrogen a
• Our condensers are manufactured from rigid design standards to match OEM dimensions. Each design undergoes a drop fit into the actual vehicle to ensure the final manufactured product provides an easy installation.
• Each condenser design endures a series of tests that includes performance testing, vibration testing, blast testing, and salt spray testing to simulate real world conditions.
• vibration testing
• blast testing
• and salt spray testing to simulate real world conditions.

High quality OE replacement part with all components needed to complete the job

Product Features:

• All the seals needed to complete the job
• Compatible with both R12 and R134a refrigerants
• SUV and rear air applications
• Application specific

New Standard Replacement A/C Service Cap And Valve Kit, MT2909

Product Features:

• MT2909
• Meets All Federal Motor Safety Standards
• No Drilling Needed For Installation
• No Modifications Needed For Installation
• Direct Fit Replacement For Your Vehicle
• Same Form Fit And Function As OE
• Check Out The Large Selection Of Parts Available For Your Vehicle

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

• The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
• The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
• The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
• The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
• O-Rings and gaskets necessary for installation are included.

Carquest Evaporators are designed to remove heat from the air inside the passenger compartment of a vehicle resulting in cooler air temperatures. They are manufactured to meet or exceed original equipment specifications and are designed to easily fit into the engine compartment.

Product Features:

• The design and manufacture of the evaporators result in uniform refrigerant distribution with optimal flow for improved performance and maximum heat transfer.
• The evaporators are constructed to offer a lightweight, compact design that will fit easily within the engine compartment.
• The surface treatment on each part ensures optimum water drainage to prevent mold and odors in the system.
• The evaporators are 100% tested to meet or exceed original equipment specifications. Each part is helium tested to ensure no leaks.
• O-Rings and gaskets necessary for installation are included.

As a leader in the development of innovative evaporator technology, DENSO offers the highest grade aftermarket products for a variety of applications. Our OE experience and know-how ensure our aftermarket products provide the unmatched performance, reliability and ease of installation you expect from DENSO. Evaporator performance is essential for proper air-conditioning performance. DENSO’s evaporator configurations, tanks, fin pitch, core dimensions and materials meet OE manufacturers’ rigid specifications. All DENSO First Time Fit® evaporators pass our strict durability and function tests. Evaporator Types Available: Multitank Superslim (MS). Parallel flow single-tank. Serpentine. In 2002, DENSO introduced the thinnest evaporator of its kind. The Multitank Superslim (MS) type evaporator is only 38mm in width and uses the world’s thinnest tubes and plates, making it smaller and more lightweight than earlier evaporator designs.

Product Features:

• Thinner – Thinner tube (1.7mm) and shorter fin height (5mm) improves heat exchange efficiency
• High Performance – Separating the tubes and the tanks increases the tank flow path area and reduces refrigerant pressure loss
• Light Weight – The tube’s zinc diffusion layer improves corrosion resistance, resulting in very thin tube plate thickness (0.2mm)
• Excellent Draining Capacity – Slits on the outer fins make draining easy
• Dependable and lightweight
• Made to fit the first time without the need for adjustments or modifications

The AISIN ABS Speed Sensor is a high quality Original Equipment replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.

Product Features:

• Premium Original Equipment replacement
• Provides performance and dependability
• Manufactured to meet OE specifications

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

• High grade materials that are equal to or better than OE provide durability and long service life
• All ABS sensors are tested for proper fit, form, and function
• Wire diameter and sheathing same or larger than OE to ensure product quality
• Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
• Includes all necessary brackets and hardware

Advance Auto Parts is committed to providing high-quality ABS sensors. The entire manufacturing process is closely managed to deliver high quality products.

Product Features:

• High grade materials that are equal to or better than OE provide durability and long service life
• All ABS sensors are tested for proper fit, form, and function
• Wire diameter and sheathing same or larger than OE to ensure product quality
• Glass filled reinforced plastic for superior resistance to automotive fluids, dirt, salt and road debris
• Includes all necessary brackets and hardware