Lexus RX300 Steering and Chassis Parts

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Low swell in hydrocarbon fluids
• Design type: spring loaded; multi-lip
• Provides good low temperature capability
• Temperature range: -40°F to 225°F; -40°C to 107°C
• Delivers quality and reliable performance for every type of repair

Rein OE Quality power steering low pressure return hose assemblies are designed to save valuable labor time. During the manufacturing process, each low pressure return assembly undergoes testing of its low temperature flexibility and corrosion resistance to exceed industry standards. Rein low pressure hose assemblies are built with OE comparable rubber compound hose along with protective jacket(s) and or heat sleeve(s). The tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools and sealing hardware all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• OE quality, braided rubber compound hose
• Coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Our parts are 100% tested to verify both mechanical and electrical switching performance.
• Decades of industry leading research and development focused on meeting the technician’s needs
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability.  Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications.  Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and  perform the way professional technicians demand.  

Product Features:

• OE matched design for Form, Fit, and Function
• Advanced corrosion-resistant electro-coating to reduce rust
• Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
• Hex formed studs &/or wrench flats for ease of installation
• Hardware included for easier installation (where applicable)

Steering Rack Boot Kit

An integral part of the drive system for belt-driven steering pumps. Dorman’s Power Steering Pump Pulley helps restore power steering to proper functioning. The pulley is recommended for replacement whenever you service the power steering pump.

Product Features:

• High quality plastic and/or steel construction
• Easy installation
• Direct replacement for a proper fit every time
• Quality-tested to ensure trouble-free performance and durability

Driveworks Brand ball joints are made to meet OE specifications. They play a critical role in the safe operation of the vehicle by eliminating unstable front-end suspension. Driveworks Brand chassis parts ensure improved steering response and durability.

Product Features:

• Meets or exceeds OE performance specifications
• Premium Polychloroprene boot provides extended temperature range and better wear resistance
• Test-proven stud material helps prevent premature stud failure
• Provides premium gauge steel construction for strength and durability
• Performance tested to ensure durability

TrackBarBsh

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:

• Unique polyurethane alternative
• Sleeves in the bushings freely rotate which enhances longevity
• Impregnated with graphite to aid in lubrication and reduce noise
• Alternative to conventional rubber suspension bushings

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Can solve excessive tire wear and steering issues
• Provides like-new steering, ease of installation and longer life
• Can bring vehicles back to factory specification
• Shims and bushings provide precise camber, caster and toe adjustments
• Incorporates proven design and engineering features

Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• SAE J188 compliant high pressure rubber compound hose with internal noise absorber
• SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

• All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
• All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
• Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
• Units are supplied with 100% tested and calibrated pressure relief valves.
• Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

Advanced Suspension Technology bushings offer a unique polyurethane alternative to conventional rubber suspension bushings. AST bushings are urethane-based and are impregnated with graphite to aid in lubrication and reduce noise. Polyurethane bushings are stronger and last longer than standard rubber bushings. Most modern production vehicles are designed using rubber bushings which have a limited lifespan. This contributes to suspension failure due to vehicular weight and the inherent design of high-tech suspensions. Typically this results in less than desirable vehicle handling and can cause many related parts to wear out more rapidly than necessary. Polyurethane corrects this problem and in many cases improves vehicle handling and drivability. Once removal of original bushings has taken place, installation of the new polyurethane bush typically takes from 1 – 5 minutes to install.

Product Features:

• Unique polyurethane alternative
• Sleeves in the bushings freely rotate which enhances longevity
• Impregnated with graphite to aid in lubrication and reduce noise
• Alternative to conventional rubber suspension bushings

Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function

Product Features:

• PWR Rack and Pinions are 100% NEW and Engineered In North America
• All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
• Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
• Includes: Factory Installed OE Mounting Bushings, Mounting Bracket, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
• Precision Routed and Constructed Fluid Transfer Tubes
• Manufactured to meet or exceed OE requirements
• Engineering, test, and quality validation in the USA

Driveworks cam bolts easily install in place of the factory lower control arm mounting bolts.

Product Features:

• Meets or exceeds OE performance specifications
• Precision engineered for improved ride and superior performance
• Performance tested to ensure durability

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Heat treated components
• Dust seal to prevent contamination
• Restores vehicle handling
• Restores OE alignment

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:

• 100% testing ensures leak-free performance
• Designed to match O.E. fit, function and performance
• Manufactured from O.E. grade material for strength and durability
• Resistant to cracking caused by the high temperatures in the engine compartment
• Reservoirs with integrated filter have the same filtration efficiency as O.E.

Driveworks Brand Camber Cam Bolt Kit is mainly used for car chassis suspension system

Product Features:

• Meets or exceeds OE performance specifications
• Precision engineered for improved ride and superior performance
• Performance tested to ensure durability

Sway Bar Link

SwyBarBshKt

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

• Rubber or Thermoplastic material
• No Squeak
• Restores vehicle handling
• Improves body roll

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Can bring vehicles back to factory specification
• Can solve excessive tire wear and steering issues
• Shims and bushings provide precise camber, caster and toe adjustments
• Incorporates proven design and engineering features
• Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

• Can bring vehicles back to factory specification
• Can solve excessive tire wear and steering issues
• Shims and bushings provide precise camber, caster and toe adjustments
• Incorporates proven design and engineering features
• Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles