Lexus LX570 Drivetrains
Top Lexus LX570 Drivetrains Categories
We carry over 30 Drivetrains in inventory for the Lexus LX570. If you’re looking for aftermarket Drivetrains for your Lexus LX570, check out all these categories:
Essential Lexus LX570 Drivetrains
MOOG Driveline Products – Greaseable Super Strength Universal Joint (Part No.285)
from
$35.99
Product Features:
See More
- BUILT TO LAST – Rugged design specifically engineered for applications with higher torque and horsepower
- COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
- CORROSION PROTECTION – Exclusive MICRO SHIELD coating protects against rust and corrosion
- GREASABLE DESIGN – Bearing cups feature a radial design to allow 360 Degrees lubricant distribution to all bearing surfaces
- KEEPS DIRT OUT – Abrasion-resistant nitrile seals provide ideal grease retention and protection from under-vehicle contaminants
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- STRONG AND DURABLE – Bearing cups are cold-forged, case-hardened and precision ground while steel cross is forged and carburized heat treated for strength and durability
Carquest Premium – New CV Axle Assembly (Part No.NCV548051)
from
$169.99
Manufactured to be an OE replacement, CV axles use 100% new materials and are engineered for ease of installation and long service.
Product Features:
See More
Product Features:
- All New Materials
- Engineered for OE Fitment
- -40 Degree Rated CV Boots
- Moly-Blend Grease in inner and outer joints
- New nut and mounting hardware included if required
Idemitsu – Type TLS-LV Automatic Transmission Fluid, 1 Quart (Part No.30040096-75000C)
from
$14.49
Formulated to meet the specific requirements of Toyota, Lexus, and Scion vehicles equipped with conventional (non-CVT) transmissions that require the use of Toyota ATF WS. Recommended for service-fill in all Toyota, Lexus, and Scion automatic transmissions where ATF WS is specified. Fuel economy demands and more sophisticated electronic controls have made automatic transmissions not only more complex, but also unique to each vehicle manufacturer. Long gone are the days of having just a couple choices of automatic transmission fluid type. IDEMITSU is the factory fill Automatic Transmission Fluid (ATF) supplier to most Asian imports. IDEMITSU application-specific ATF products match the exact friction materials and performance requirements of each different vehicle model for which they are made.
Product Features:
See More
Product Features:
- Precisely engineered frictional characteristics guarantee smooth shifting and outstanding anti-shudder performance
- Optimized viscosity and advanced friction reducing additive technology provide exceptional fuel economy performance
- Excellent resistance to oxidation and thermal breakdown provide long fluid life and extended protection
- Exceptional wear protection of gears and bearings
- Provides superior deposit control and protects metal surfaces from rust and corrosion
- Excellent seal compatibility and conditioning reduces risk of fluid leaks due to seal shrinkage, hardening and cracking
Driveworks – Taper Bearing Cone (Part No.S-HM-88649)
from
$19.49
Value-priced bearing meets all cataloged application requirements.
Product Features:
See More
Product Features:
- Brand may vary by location
National – Shaft Repair Sleeve (Part No.99181)
from
$37.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Motive Gear – Differential Carrier Shim Kit (Part No.GM9.5SSK)
National – Multi-Purpose Seal (Part No.710596)
from
$11.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
FAG US – Shaft Seal (Part No.SS2881)
from
$7.19
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
National – Transfer Case Output Shaft Seal (Part No.710956)
from
$10.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -30 Deg. F to 325 Deg. F / -34 Deg. C to 163 Deg. C
- Superior thermal and chemical resistance
- Good abrasion and dry running capability
- Delivers quality and reliable performance for every type of repair
Dorman – Front Drive Shaft: Greaseable, Adjustable (Part No.938-288)
from
$482.99
Product Features:
See More
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
Dorman – Driveshaft Assembly (Part No.986-457)
from
$792.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
National – Transfer Case Output Shaft Seal (Part No.710957)
from
$10.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -30 Deg. F to 325 Deg. F / -34 Deg. C to 163 Deg. C
- Superior thermal and chemical resistance
- Good abrasion and dry running capability
- Delivers quality and reliable performance for every type of repair
Dorman – 4 Wheel Drive Transfer Case Motor Assembly (Part No.600-477)
from
$1116.00
Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection.
Product Features:
See More
Product Features:
- Direct replacement – this transfer case motor fits and performs like the original motor on certain vehicle applications
- Durable construction – made with factory-style electrical connector and weathertight seal to prevent corrosion
- 100% new – this transfer case motor is entirely new, not remanufactured like competitors
- Quality assured – vehicle-specific application has been validation tested to ensure quality
National – Multi-Purpose Bearing (Part No.208)
from
$38.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Multi-Purpose Seal (Part No.710697)
from
$18.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
National – Differential Pinion Seal (Part No.710931)
from
$36.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
AISIN – Transfer Case Shift Actuator Assembly (Part No.SAT-024)
from
$1005.99
OE Manufactured Direct Replacement Shift and Lock Actuators Control the Vehicle 2WD to 4WD, 4WD High to Low, and/or Differential Lock Function.
Product Features:
See More
Product Features:
- Actuators control the vehicle 2WD to 4WD, 4WD High to Low, and/or differential lock function.
AISIN – Transfer Case Shift Actuator Assembly (Part No.SAT-016)
from
$909.99
OE Manufactured Direct Replacement Shift and Lock Actuators Control the Vehicle 2WD to 4WD, 4WD High to Low, and/or Differential Lock Function.
Product Features:
See More
Product Features:
- Actuators control the vehicle 2WD to 4WD, 4WD High to Low, and/or differential lock function.
AISIN – Transfer Case Shift Actuator Assembly (Part No.SAT-015)
from
$909.99
OE Manufactured Direct Replacement Shift and Lock Actuators Control the Vehicle 2WD to 4WD, 4WD High to Low, and/or Differential Lock Function.
Product Features:
See More
Product Features:
- Actuators control the vehicle 2WD to 4WD, 4WD High to Low, and/or differential lock function.
Lexus LX570 Drivetrains Categories
Helping You Find the Right Drivetrains for Your Lexus LX570
You love your LX570. So we’ve made it easier than ever to help you find Lexus LX570 Drivetrains in our online catalog. Our inventory holds 30 aftermarket and OEM Drivetrains for your Lexus LX570, ranging from $6.99 to $1,116.00.
We offer parts from 14 brands trusted to make quality Drivetrains for your Lexus LX570. Before you buy, take some time to read through customer reviews. We currently have 1,143 reviews of Lexus LX570 Drivetrains from previous customers. Some of the top rated parts include Universal Joint with 4.3 stars and Multi-Purpose Seal with 4.0 stars.
Find your LX570 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Lexus LX570 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Lexus LX570
Our inventory holds Drivetrains for your Lexus LX570 from 14 trusted brands. You’ll find OEM and aftermarket parts from brands like Mobil Oil, Valvoline, and Moog, all of which can keep that Lexus happy.
We have Valvoline parts available for your Lexus LX570 in categories like Differentials. Some of the top-rated Valvoline parts in these categories are:
from
$14.49
(2)
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
Top-Rated Mobil 1 Drivetrains
Leading Mobil 1 Drivetrains
We carry Mobil 1 brand parts for your Lexus LX570 across several catalog categories, including Differentials. Some of our most reviewed Mobil 1 parts include:
FAQs for Lexus LX570 Drivetrains
What are the most purchased Drivetrains for the Lexus LX570?
Out of 30 Drivetrains for the Lexus LX570, the most popular in our inventory are:
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Differential Oil
from
$18.99
This product is not rated
Flex Fill Transmission & Differential Gear Oil: Full Synthetic 75W-90, 1 Quart
Differential Oil
What are the top-rated Lexus LX570 Drivetrains?
Top-rated Drivetrains for your Lexus LX570 based on customer reviews/ratings are:
from
$35.99
(4)
Greaseable Super Strength Universal Joint
“My rear drive shaft had developed a clunk on my 93 4runner 4×4. Went underneath the truck gave the driveshaft some movement with a pry bar and sure en”
