Kenworth 13-210 Belts and Hoses
Top Kenworth 13-210 Belts and Hoses Categories
We carry over 15 Belts and Hoses in inventory for the Kenworth 13-210. If you’re looking for aftermarket Belts and Hoses for your Kenworth 13-210, check out all these categories:
Essential Kenworth 13-210 Belts and Hoses
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080825HD)
from
$73.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material provides maximum performance at extreme and prolonged operating temperatures.
- Heavy-duty construction resists cracking and wear, even at extreme temperatures
- Special compound provides unmatched flexibility, stability, load carrying capacity and belt life
- Troubleshooting designed for the most challenging applications
- It consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- Replacing the tensioner is recommended (if the vehicle is equipped with one).
Gates – Automotive XL High Capacity V-Belt (Part No.9485)
from
$31.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- The fiber-reinforced rubber support adds flexibility along the belt and provides greater lateral stability on the pulley.
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally active tension cords for maintenance-free operation when the belt is properly installed and tensioned
- It resists oil, heat, ozone, weather, and decay to improve belt life.
- Meets or exceeds SAE J636C specifications
Gates – FleetRunner Heavy-Duty V-Belt (Part No.9485HD)
from
$31.99
Designed for the toughest applications, Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material offers optimal performance at extremely high operating temperatures.
- Construction that resists cracking, wear, oil, and heat
- Special compound provides unmatched stability, load carrying capacity and belt life
- The unique notch pattern offers greater flexibility for smaller diameter pulleys
- Troubleshooter for problematic drives
- Engineered to save your fleet money and reduce downtime
- Compliant with RMA standards for oil and heat resistance and static conductivity requirements
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26511)
from
$50.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- The steel wire spiral allows them to adopt multiple shapes without bending or crushing
- EPDM tube and neoprene lid for extended lifespan
- The polyester fabric reinforcement takes the form of vulcanization without unnecessary stress on the connections.
- Resistant to heat, oil and ozone
- Compliant with SAE 20R5 Type EC Class D-2 specifications
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transfer applications
- Caution: Do not use for fuel or oil transfer applications.
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.75" Long, 2" Diameter (Part No.E70739)
from
$42.99
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, 2" Diameter (Part No.B71569)
from
$9.49
The Dayco curved radiator hose features knitted reinforcement, a protective sleeve and a synthetic EPDM rubber construction for high-strength performance, protection against abrasion and resistance to oil, mud, salt, road debris, ozone and coolants. It can also withstand temperature variations of -40 Deg. F (-40 Deg. C) to +257 Deg. F (+125 Deg. C). The inner base tube is reinforced with knitted rayon for maximum strength and burst resistance for the life of the hose.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-1 requirements
- Meets Type EC electro-chemical requirements as specified in SAE J1684, which prevents inner tube deterioration caused by the build-up of static electric charges
- Provides excellent protection against external elements
Dayco – Straight Coolant Hose, Standard, I.D. 2" (sold by inch) (Part No.76200)
from
$1.79
Designed for a wide range of light and heavy duty truck applications where the radiator hose routing is relatively straight, Dayco’s Straight Radiator Hose features knitted einforcement and synthetic EPDM rubber construction. It meets SAE J20R4, Class D-2 requirements and provides high strength and resistance to ozone and other detrimental environmental elements, coolants, and temperature variations from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C). Note: This hose is NOT suitable for fuel or oil transfer.
Product Features:
See More
Product Features:
- Meets SAE J20R4, Class D-2 requirements
- Features a high strength knitted reinforcement and synthetic EPDM rubber construction
- Resistant to standard coolants, ozone and other detrimental environmental elements
- Works well in temperatures ranging from -40 Degree F (-40 Degree C) to +257 Degree F (+125 Degree C)
- PLEASE NOTE: Priced and sold by inch. See store for details.
Gates – Micro-V Serpentine Drive Belt (Part No.K080685)
from
$69.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the surface of the ribs
- Meets or exceeds all original equipment manufacturer specifications.
- Replacing the tensioner is recommended (if the vehicle is equipped with one).
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080685HD)
from
$112.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- Patented material provides peak performance at prolonged extreme operating temperatures
- Construction resistant to cracking and wear, even at extreme temperatures
- The special compound provides unprecedented flexibility, stability, load-carrying capacity, and belt life.
- A problem-solving tool designed for the most challenging applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Engineered to save your fleet money and reduce downtime
- Tensioner Replacement is Recommended (if equipped)
Gates – Micro-V Serpentine Drive Belt (Part No.K080825)
from
$50.99
Import or domestic, car or truck, every vehicle can depend on the superior quality of Gates precision fit Micro-V belts. With advanced technology that matches the OE size, construction and materials, Gates Micro-V ensures optimal vehicle performance.
Product Features:
See More
Product Features:
- Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
- EPDM rubber constructions resist cracking on the surface of the ribs
- Meets or exceeds all original equipment manufacturer specifications
- Tensioner Replacement is Recommended (if equipped)
- Unique form grinding of each individual belt assures precise dimensional control.
- Meets or exceeds SAE J1459, SAE J2432, and SAE J1596 specifications.
Gates – Micro-V Serpentine Drive Belt (Part No.K080590)
from
$57.99
We are proud to offer this CARQUEST product line: CARQUEST Premium Serpentine Belts By Gates
Product Features:
See More
Product Features:
- The special construction of the belt eliminates belt noise, reduces tension loss, and solves problems in drive applications.
- EPDM rubber constructions resist cracking on the surface of the ribs.
- Meets or exceeds all original equipment manufacturer specifications
- Replacing the tensioner is recommended (if the vehicle is equipped with one).
Dayco – Poly Rib Belt HD Serpentine Belt; 59.06 Long, 8 Rib Count, Heavy Duty (Part No.5080590)
from
$60.99
Produced for heavy-duty vehicles and buses with multiple accessories, Dayco HD poly-V belts are made from EPDM material to resist heat and are compliant with the latest standards, guaranteeing resistance, reliability, low noise and longer service life. Engineered for high torque and power pulses, these belts also feature specially treated cords within the belt to resist stretching and ensure length stability.
Product Features:
See More
Product Features:
- Engineered to handle operating conditions with temperatures up to 130°C (266°F)
- Designed for multiple accessories such as A/C, power steering pumps, alternators and water pumps
- Capable of delivering excellent performance in high torque and high power pulse applications
- Specially formulated treated cord insures length and tension stability on heavy duty diesel engine drives for the life of the belt
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080590HD)
from
$102.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material provides maximum performance at extreme and prolonged operating temperatures.
- Heavy-duty construction resists cracking and wear, even at extreme temperatures
- The special compound provides unprecedented flexibility, stability, load-carrying capacity, and belt life.
- A problem-solving tool designed for the most challenging applications
- It consistently outperforms other heavy-duty serpentine belts on the market
- Designed to save your fleet money and reduce downtime
- Replacing the tensioner is recommended (if the vehicle is equipped with one).
Gates – FleetRunner Heavy-Duty Micro-V Serpentine Drive Belt (Part No.K080560HD)
from
$68.99
Gates Fleet Runner Micro-V Belts are designed for the toughest applications. Fleet Runner construction provides superior flexibility, stability, load capacity, and unsurpassed belt life. Patented materials deliver peak performance at extreme prolonged operating temperatures, making this belt the ultimate problem solver. An advanced blend of EPDM rubber technology withstands the modern threats of deterioration from increased exposure to ozone and water-based coolants. Fleet Runner does this all while providing the lowest cost per mile for fleets, including 3/4 and 1 ton pickups.
Product Features:
See More
Product Features:
- The patented material provides maximum performance at extreme and prolonged operating temperatures.
- Construction resistant to cracking and wear, even at extreme temperatures
- A special compound offers unparalleled flexibility, stability, load capacity, and belt lifespan.
- A problem-solving tool designed for the most challenging applications
- Consistently outperforms other heavy-duty serpentine belts on the market
- Designed to save your fleet money and reduce downtime
- It is recommended to replace the tensioner (if equipped).
Kenworth 13-210 Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your Kenworth 13-210
You love your 13-210. So we’ve made it easier than ever to help you find Kenworth 13-210 Belts and Hoses in our online catalog. Our inventory holds 15 aftermarket and OEM Belts and Hoses for your Kenworth 13-210, ranging from $1.79 to $112.99.
We offer parts from 2 brands trusted to make quality Belts and Hoses for your Kenworth 13-210. Before you buy, take some time to read through customer reviews. We currently have 2 reviews of Kenworth 13-210 Belts and Hoses from previous customers.
Find your 13-210 Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Kenworth 13-210 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your Kenworth 13-210
Our inventory holds Belts and Hoses for your Kenworth 13-210 from 2 trusted brands. You’ll find OEM and aftermarket parts from brands like Dayco and Gates, all of which can keep that Kenworth happy.
We have Dayco parts available for your Kenworth 13-210 in categories like Engine Cooling Hoses. Some of the top-rated Dayco parts in these categories are:
from
$9.49
(1)
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 5" Long, 2" Diameter
Lower Radiator Hoses
FAQs for Kenworth 13-210 Belts and Hoses
What are the most purchased Belts and Hoses for the Kenworth 13-210?
Out of 15 Belts and Hoses for the Kenworth 13-210, the most popular in our inventory are:
from
$60.99
This product is not rated
Poly Rib Belt HD Serpentine Belt; 59.06 Long, 8 Rib Count, Heavy Duty
Serpentine Belts
from
$42.99
This product is not rated
Curved Radiator Hoses: EPDM Rubber, Standard Duty, 13.75" Long, 2" Diameter
Lower Radiator Hoses
