Jeep Wrangler Steering and Chassis Parts
Top Jeep Wrangler Steering and Chassis Parts Categories
We carry over 515 Steering and Chassis Parts in inventory for the Jeep Wrangler. If you’re looking for aftermarket Steering and Chassis Parts for your Jeep Wrangler, check out all these categories:
Essential Jeep Wrangler Steering and Chassis Parts
Rancho – Steering Damper Bracket (Part No.RS64100)
from
$98.99
Designed to mount your steering stabilizer out of harm’s way above the factory tie rod, the Rancho® high clearance stabilizer bracket kit for the Jeep® Wrangler JK helps reduce bump steer and vibration.
Product Features:
See More
Product Features:
- COMPATIBILITY — Designed for Jeep Wrangler JK 2-door and 4-door models
- BUILT FOR THE TRAIL — Ideal for off-road driving and trail riding, high-clearance design mounts the steering stabilizer out of harm’s way above the factory tie rod
- FOR LIFTED VEHICLES — Requires minimum 2-in. lift with at least 2-in. high front bump stop spacers
- REDUCES TIRE WEAR — Helps reduce wheel shimmy and tire wear on vehicles with oversized wheels and tires
- ENHANCES VEHICLE CONTROL — Assists with reducing bump steer and vibration
- RESISTS CORROSION — Durable black-coated finish resists rust and corrosion
- ENGINEERED TO LAST — Features high-strength steel brackets for long life
- EASY TO INSTALL — Bolts directly to factory tie rods with included Grade 8 mounting hardware; no modifications needed
- BUY WITH CONFIDENCE — Comes with Rancho’s Limited Warranty
Driveworks – Steering Tie Rod End (Part No.DW-ES3095R)
from
$31.99
When replaced, Driveworks Brand tie rod ends help to eliminate front-end vibration, shimmy and unsafe handling. Driveworks Brand chassis parts help ensure improved steering response and durability.
Product Features:
See More
Product Features:
- Meets or exceeds OE performance specifications
- Performance tested to ensure durability
- Forged micro-alloy steel construction for strength and durability
- A slotted nut and cotter pin for a more secure installation
BBB Industries – Power Steering Filter (Part No.991-FLT4)
Dorman – Intermediate Steering Shaft (Part No.425-232)
from
$809.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
Omix – Ball Joint Kit; 87-06 Jeep Wrangler (Part No.18036.03)
from
$218.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Includes 1 Upper And 1 Lower
- OE Style
- Direct Fit
Powercraft – Steering Gear Lower Pitman Shaft Seal Kit (Part No.7856)
from
$43.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Omix – Steering Box Seal; 97-02 Jeep Wrangler TJ (Part No.18005.03)
from
$32.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Complete Kit
- OE Style
- Direct Fit
Carquest Premium – Suspension Track Bar (Part No.740-71366)
from
$56.99
Carquest chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. Carquest chassis has been rigorously quality-tested, meeting or exceeding OE specifications. Carquest chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.
Product Features:
See More
Product Features:
- OE matched design for Form, Fit, and Function
- Advanced corrosion-resistant electro-coating to reduce rust
- Hex formed studs and/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
- Hardware included for easier installation (where applicable)
Omix – Power Steering Pressure Hose with 4.2L; 87-90 Jeep Wrangler YJ (Part No.18012.04)
from
$61.99
Is your Jeep’s power steering hose leaking? Tired of adding fluid? Omix-ADA offers high-quality replacements that will give you years of service and get you back on the road.
Product Features:
See More
Product Features:
- Withstands High Oil Temperatures
- OE Style
- Direct Fit
Dorman – Power Steering Reservoir: Black and White, Plastic, Original Equipment Replacement (Part No.603-717)
from
$34.99
This replacement power steering fluid reservoir is manufactured from quality materials to withstand the stresses of underhood heat and engine vibration. It is thoroughly tested to ensure optimum fit on specific vehicle applications.
Product Features:
See More
Product Features:
- Direct replacement – this power steering fluid reservoir fits and functions like original equipment for a trouble-free installation
- Complete assembly – includes reservoir and reservoir cap
- Reliable performance – built to withstand excessive heat and vibration
- Quality tested – this part has undergone on-vehicle testing to ensure a quality fit and long service life
Powercraft – Steering Gear Input Shaft Seal Kit (Part No.8525)
from
$15.79
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Rugged Ridge – Steering Tie Rod Drag Link Kit; Heavy Duty; 87-95 Jeep Wrangler YJ (Part No.18050.83)
from
$795.99
Not recommended for vehicles with over 4 inch of lift. Not compatible with smaller OEM steel wheels or wheels with deep backspacing. Not recommended for vehicles with under 2 inch of lift.
Product Features:
See More
Product Features:
- One Ton Strength
- 1/4 in. Wall Thickness
- Uses 7/8 in. Tie Rod Ends
- True DOM Tubing w/ No Seams
- Includes Drag Link; Tie Rod; Ends
Dorman – Sway Bar Kit (Part No.927-164)
from
$158.99
This suspension stabilizer bar, also called a sway bar, matches the fit and function of the original sway bar on specified vehicles to restore reliable vehicle handling. With a corrosion-resistant finish, it includes installation hardware.
Product Features:
See More
Product Features:
- Ideal replacement – this sway bar matches the fit and function of the original part on specified vehicle years, makes and models
- Durable construction – this sway bar is made of quality materials with a corrosion-resistant finish
- Cost-effective solution – offers original equipment quality at competitive price
- Quality tested – this part has undergone testing to ensure a quality fit and long service life
Crown Auto Jeep Replacmnt – OE Replacement (Part No.4487696K)
from
$36.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Leading Manufacturer Of Quality Replacement Parts For Jeep
- Meets Standards For Quality
- Crown Automotive Has Consistently Maintained Its Commitment To Offering Only Quality Parts And Exceptional Service
- Improve The Performance
- Easy Installation
Carquest Premium – Power Steering Pressure Hose Assembly, 16mm Male "O" Ring x 18mm Male "O" Ring (Part No.35893)
from
$73.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Rugged Ridge – Suspension Track Bar Bushing Kit; Front; Polyurethane; 07-18 JK/JKU (Part No.1-1209)
from
$81.99
Suspension Track Bar Bushing Kit; Front; Polyurethane; 07-18 JK/JKU
MOOG – Lower Suspension Ball Joint (Part No.K3161T005)
from
$66.99
Backed by superior materials and rigorous testing, MOOG® ball joints deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- OVERSIZED FOR TIGHT FIT — Designed with a larger outer diameter to ensure a tight fit in a worn receptacle
- PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- PROBLEM SOLVER® GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- KEEPS DIRT AND WATER OUT — Pre-installed dust boot shields socket components from wear-causing contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purpose
- ENGINEERING EXCELLENCE — With 50+ dedicated engineers and 50+ patents, MOOG engineers every part with purposeááááááááá
Carquest Premium – Pitman Arm (Part No.600-258909)
from
$92.99
Carquest Premium pitman arms are engineered and benchmarked to original equipment (O.E.) performance standards. Consistent manufacturing and rigorous quality testing ensure a trouble-free installation and long service life. Carquest Premium pitman arms utilize the same joint technology as the OE part, with either a sealed (maintenance-free) design or a metal-on-metal (greaseable) design. We feature a corrosion-resistant coating on pitman arms to reduce rust. Each part number in the Carquest Premium steering and chassis parts line is designed and built to deliver the quality that you demand.
Product Features:
See More
Product Features:
- Engineered for OE fit, form and function
- Corrosion-resistant coating to reduce rust and extend service life (where applicable)
- Joint technology matches the original part with either sealed (maintenance-free) or metal-on-metal (greaseable) designs
- Hardware included for easier installation (where applicable)
- Hardware included for easier installation (where applicable)
National – Multi-Purpose Seal (Part No.480821)
from
$8.79
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Powercraft – Steering Gear Major Seal Kit (Part No.8775)
from
$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Imperial – Mounting Kit System (Part No.226201)
from
$11.99
Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.
Product Features:
See More
Product Features:
- Imperial mounting kit system
- For installation of transmission coolers and electric fans
- Provides quick, effective installation of Imperial products
- Contains nylon mounting rods, foam pads and locking buttons
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
- Aftermarket electric fan and cooler mounting rods
- Made with the highest quality materials
- Quality machined for durability
- Removable buttons for relocation
MOOG – Steering Pinion Angle Adjusting Bolt (Part No.K100047)
from
$41.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
Omix – Drag Link Kit; 07-17 Jeep Wrangler JK/JKU (Part No.18050.11)
from
$185.99
Drag Link Kit; 07-17 Jeep Wrangler JK/JKU
Rare Parts – TIE ROD SLEEVE (Part No.RP25504)
from
$37.99
TIE ROD SLEEVE
Carquest Premium – Multi-Use Connector (Part No.PTA1364)
from
$42.99
Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.
Product Features:
See More
Product Features:
- Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Jeep Wrangler Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Jeep Wrangler
You love your Wrangler. So we’ve made it easier than ever to help you find Jeep Wrangler Steering and Chassis Parts in our online catalog. Our inventory holds 515 aftermarket and OEM Steering and Chassis Parts for your Jeep Wrangler, ranging from $3.29 to $1,041.00.
We offer parts from 28 brands trusted to make quality Steering and Chassis Parts for your Jeep Wrangler. Before you buy, take some time to read through customer reviews. We currently have 98,146 reviews of Jeep Wrangler Steering and Chassis Parts from previous customers. Some of the top rated parts include Magnum Steering Damper with 4.6 stars and Power Steering Oil Cooler with 3.7 stars.
Find your Wrangler Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Jeep Wrangler part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Jeep Wrangler
Our inventory holds Steering and Chassis Parts for your Jeep Wrangler from 28 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial, Moog, and Carquest Premium, all of which can keep that Jeep happy.
We have National parts available for your Jeep Wrangler in categories like Steering Shafts. Some of the top-rated National parts in these categories are:
Top-Rated Cardone Steering and Chassis Parts
Leading Cardone Steering and Chassis Parts
We carry Cardone brand parts for your Jeep Wrangler across several catalog categories, including Power Steering Parts. Some of our most reviewed Cardone parts include:
FAQs for Jeep Wrangler Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Jeep Wrangler?
Out of 515 Steering and Chassis Parts for the Jeep Wrangler, the most popular in our inventory are:
from
$8.79
This product is not rated
3/8" I.D. Return Hose (J189) (sold by foot)
Power Steering Return Hoses
What are the top-rated Jeep Wrangler Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Jeep Wrangler based on customer reviews/ratings are:
from
$62.99
(84)
Magnum Steering Damper
“Direct fit on my 2000 Jeep Cherokee XJ! Much better handling. With the 20% online order I picked it up at the store later in the day for a very good”
from
$111.99
(34)
Suspension Ball Joint
“PUT A SET ON MY 86 f-150 BACK IN 92, MY SON STILL DRIVING IT WITH NO PROBLEMS, DONT MIND PAYING MORE FOR GOOD PRODUCTS THAT I KNOW WILL LAST, FRONT EN”
