Jeep Wrangler Performance Air Intake Kits

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, textured black powder coated aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

“A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. (US PAT 9440175) For Filter-to-Housing Interface. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large 5″” flange and is 9″” tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.”

This K&N NextGen cold air intake system is engineered for Jeep Wrangler V6 3.6L F/I. A high-density polyethylene (HDPE) rotationally molded tube helps increase the volume of airflow by 46.7% to your engine and provides an increase of 21.34 horsepower and 25.2 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed NextGen air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Unique One-Piece High Quality Housing w/ Sight Window:A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made of heat soak resistant cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection.

Blackhawk Induction air intake systems feature an oil-free synthetic filter media, black powder-coated aluminum intake tube, and all-black components. The layered DRYFLOW synthetic filter provides increased airflow and exceptional engine protection without requiring oil, and a steel heat shield helps protect intake air from the high temperatures of your engine bay. The system can typically be installed in less than 90 minutes.

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

“This 8″” tall 360-degree radial flow air filter features a 4.5″” flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included performance air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. The factory air inlet scoop passes directly into the airbox providing a ram-air effect. The open design allows for easy viewing of the air filter and delivers an aggressive intake induction sound. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.”

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

“This 8″” tall 360-degree radial flow air filter features a 4.5″” flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The included performance air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housings that minimize warm engine air for maximum performance. The factory air inlet scoop passes directly into the airbox providing a ram-air effect. The open design allows for easy viewing of the air filter and delivers an aggressive intake induction sound. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. The XLPE material is heat soak resistant and extremely durable. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included. Its revolutionary design, featuring our patent pending filter-to-housing interface, uses half the number of parts of a traditional cold air intake system.”

“This intake system utilizes an oil free, 7-1/2″” tall inverted top conical 360 degree radial flow performance air filter with 5-layers of progressive cotton media with 2-layers of non-woven synthetic media providing 99.7% cumulative efficiency for maximum filtration. (US PAT 06811588). One Piece 3″” Mandrel-Bent aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque. Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses fac tory mounting locations for fast and easy installation. All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.”

K&N , 50-1576. PERFORMANCE PARTS>PERFORMANCE FILTERS AND INTAKES>AIR INTAKES>AIR INTAKES from K&N

“Bringing you the next generation of intakes, aFe is proud to introduce the Momentum GT Sealed intake system for the 2012-2018 Jeep Wrangler (JK) with the V6 3.6L engine. The Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This system is superior in every way. From the one-piece sealed housing, to the massive air filter, rotomolded tube w/ built-in resonance chamber and premium hardware. Unique One-Piece High Quality Housing w/ Sight Window: A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. Roto-molded Tube: This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Large 5-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone inverted top filter has a massive round flange and is 9″” tall inverted top Pro 5R media. The Pro 5R performance air filter features 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process. (US PAT 9440175) For Filter-to-Housing Interface. Premium Hardware: Premium stainless steel T-bolt clamps are used to securely mount the high flow air filter to the 1-piece airbox. Momentum GT intakes are designed with fewer parts for a quick and simple installation.”

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, polished aluminum tubing and a black powder coated heat shield to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

This filter features three layers of oil-free synthetic media and requires no oil during maintenance to provide maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity. This media is best suited for street use. Pro DRY S filters are easily recharged with aFe’s POWER CLEANER. The unique IRF (Inverted Replacement Filter) design utilizes the depth of the OE airbox, providing maximum surface area, airflow, and performance, all within the stock filter housing. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel worm clamps and silicone couplings are used for strength and durability.

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Spectre air intake systems are designed to get more horsepower and torque from your vehicle while working to protect your engine from harmful debris. This air intake comes with a red Spectre reusable low restriction air filter, high quality polished aluminum tubing and a black powder coated heat shield (where applicable) to help prevent engine air from entering the intake inlet. Spectre air intakes come with the necessary boots, clamps and hardware for an OE fit and finish.

“9”” Tall Air Filter:This intake system utilizes an oil free, 9″” tall inverted top conical 360-degree radial flow performance air filter with five layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. The filter mounts to a 3-angle adaptor for improved volumetric efficiency and maximum performance.Mandrel-Bent Tubing:One Piece 3″” Mandrel-Bent Wrinkle-Black Powder-Coated aluminum intake tube directs unrestricted airflow from the filter to the throttle body for more horsepower and torque. One-Piece Heat Shield:Sturdy 18 Gauge Powder-Coated One-Piece Heat Shield blocks performance-robbing engine heat. This heat shield requires no assembly and uses factory mounting locations for fast and easy installation. Hassle-Free Installation:All clamps, couplings, and hardware are included for hassle-free installation. This is a direct bolt-on kit that requires no cutting or drilling on factory parts.”

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Unique Integrated Filter-to-Housing Design:Quantum uses an integrated filter-to-housing design that attaches both components with four captive screws, making for a positive surface area seal and easy installation. Its durable sealed housing features a unique, five rib, industrial-grade look for aFe quality recognition.Quantum Pro DRY S Performance Air Filter:The Pro DRY S performance air filter features three layers of progressively finer porosity synthetic media that does not require oil, providing maximum convenience. Quantum air filters are specifically designed for Quantum Series intake systems with an injection molded base and top for lighter weight and rigidity. The filter base also features a 3-angle velocity stack for smooth, even air flow.Dyno-Tuned Intake Tube:Quantum uses a dyno tuned, CAD-designed intake tube to achieve optimum air flow. It’s made from high impact, XLPE material for heat soak resistance and durability.Silicone Bellows Coupling:The Quantum Intake System includes silicone bellows couplings to absorb excessive engine movement and provide flexibility for a secure and easy install. Quantum intakes are designed with fewer parts for a quick and simple installation.Hassle-Free Installation:This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. The filter securely fastens to the housing with four captive screws, eliminating lost hardware, while a silicone bellows coupling absorbs excessive engine movement and provides flexibility for an easy install.

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

“A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection. This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has built-in resonance chambers to catch un-wanted air intake noises. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This filter has a massive 5″” round flange and is 8″” tall with an inverted top and features our pre-oiled Pro GUARD7media. The Pro GUARD7performance air filter features 5-layers of progressive cotton media with 2-layers of progressive synthetic media providing 99.7% cumulative efficiency for maximum filtration. (US PAT 06811588) The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel T-bolt clamps are used for durability and provide the best corrosion resistance possible. Momentum GT intakes are designed with fewer parts for a quick and simple installation.”