Jeep J-4700 Performance and Racing Products

Essential Jeep J-4700 Performance and Racing Products

Mallory – Distributor Wiring Harness (Part No.29349)

Distributor Wiring Harness

from

$30.49


Product Features:
  • Service Part
  • Makes Connections Quick And Easy
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1434)

Exhaust Manifold Gasket Set

from

$31.49
Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

Product Features:
  • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
  • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
  • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
  • Slotted bolt holes allow for easier header installation.
  • Not intended for use in emission controlled vehicles.
See More

Rancho – Single Steering Damper Kit (Part No.RS97355)

Single Steering Damper Kit

from

$113.99
Designed to reduce wheel shimmy and end vibration caused by larger tires, the Rancho® steering stabilizer kit cuts down on steering arm fatigue to improve handling. The kit includes one Rancho RS5000® steering stabilizer and installation brackets.

Product Features:
  • COMPATIBILITY — Designed for a variety of trucks and SUVs from Chevrolet®, GMC®, Ford®, Dodge®, Jeep®, Plymouth® and International®
  • IMPROVED HANDLING AND PERFORMANCE — Reduces wheel shimmy, bump steer and vibration which helps minimize on- or off-road driver fatigue
  • ACCOMMODATES LARGER TIRES — Engineered for vehicles with oversized wheels and tires.
  • ENGINEERED TO LAST — Features protective boot to shield shock rod and oil seal and 0.25-in. high-strength, low-alloy steel bracket construction for long life
  • EASY TO INSTALL — Includes one Rancho RS5000® steering stabilizer and brackets that bolt directly to factory steering linkage with included mounting hardware, no modifications needed
  • RESISTS CORROSION — Durable black powder-coated and/or zinc-plated brackets resist rust and corrosion
  • PRECISION DESIGN — Brackets are CNC cut and bent to exact specifications for a perfect fit
See More

K&N – Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine (Part No.HP-2003)

Premium Oil Filter: Ideal for Synthetic & Conventional Oil, Protects Your Engine

from

$22.29
K&N premium oil filters are meticulously engineered to offer outstanding filtration and engine protection. The heavy-duty canister is engineered to be exceptionally durable, and a one-inch welded hex nut can be used for quick and easy filter removal. Each filter is specifically designed to withstand the service intervals recommended by vehicle manufacturers.

Product Features:
  • HIGH FLOW RATES: Designed to provide exceptional flow rates and a consistent flow of oil to your engine
  • VERSATILE COMPATIBILITY: Designed to operate with all synthetic, conventional, and blended motor oils
  • PROTECT YOUR ENGINE: Pleated synthetic-blend filtration media removes most harmful contaminants
  • EXTENSIVELY TESTED: Laboratory tested to ensure excellent capacity and burst strength
  • EASY TO REMOVE: Fast and easy Wrench-Off removal
  • HEAVY-DUTY CONSTRUCTION: Heavy-duty canister for outstanding durability
  • HIGH CAPACITY: Withstand the longer service intervals now recommended by some vehicle manufacturers
See More

Omix – Camshaft Kit (Part No.17420.01)

Camshaft Kit

from

$359.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Includes Cam Shaft; Lube And Lifters
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Edelbrock – Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR) (Part No.9906)

Performer Carburetor #9906 600 CFM With Electric Choke, Satin Finish (Non-EGR)

from

$397.99
Burnished aluminum. GM/MAC- style throttle linkage. Electric choke installed from factory. Easy tuning with 2 piece design. Smooth secondary transition. Both timed for full vacuum ports. Includes PCV outlet.
See More

Edelbrock – Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet (Part No.1400)

Performer 1400 Carburetor: 600 CFM, 4 Barrel, Square Bore, Electric Choke Inlet

from

$498.99
The Edelbrock 1400 Performer Series 600 CFM electric choke carburetor is a precisely tuned, quality-built carburetor that can handle the rigors of daily driving while delivering consistent, reliable street performance from day to day. Several characterist

Product Features:
  • Edelbrock products offer improved performance and aesthetics for a broad array of vehicles and engines. ‘Proven performance’ is the philosophy by which Edelbrock was founded and it continues to this day with the highest standards for performance and quali
  • Electric Choke
  • 4 Barrel Count
  • Square Bore
  • Electric Choke Installed from Factory
  • Smooth Secondary Transition
  • Includes Only Timed Vacuum Port
  • Includes EGR ; Fuel Vapor Outlet
See More

Omix – Tie Rod End Tube (Part No.18046.03)

Tie Rod End Tube

from

$24.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too. Omix-ADA offers high quality replaceme

Product Features:
  • Steel
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Edelbrock – Performer EGR AMC Intake Manifold (Part No.3731)

Performer EGR AMC Intake Manifold

from

$484.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
See More

Edelbrock – RPM Air-Gap AMC 304/360/401 Intake Manifold (Part No.7531)

RPM Air-Gap AMC 304/360/401 Intake Manifold

from

$504.99
Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features

Product Features:
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Includes Std Oil Fill ; PCV ; A/C Accy Bosses
  • Not for Exhaust-Heat Chokes – No Exhaust Crossover
See More

Edelbrock – Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish (Part No.2131)

Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish

from

$424.99


Product Features:
  • For Idle to 5500 RPM Street-Driven Performance
  • Dual-Plane Low-Rise Intake w/180 deg. Firing Order
  • Patented Runner Design Ensures Broad Torque Curve
  • Excellent Throttle Response and Mid-Range Power
  • 50-State Street Legal if Correct Carburetor Used
  • Not for Stock Motorcraft Spread Bore Carburetor
  • Two Center Bolt Holes are Offset
See More

K&N – Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration (Part No.E-1100)

Engine Air Filter: Washable Filter, Increase Horsepower & Acceleration

from

$102.99
K&N performance High-Flow Air Filters are engineered to improve engine performance. Unlike disposable paper filters which must be frequently replaced, K&N Air Filters are washable, reusable, and engineered to last for the life of your vehicle or outdoor power small engine. Engineered to fit easily into your factory air box, installation can be completed in a matter of minutes! K&N develops and tests each product on the world┐s toughest race tracks, so we can bring the highest level of performance to your daily driving. Join the millions of customers who have saved money and improved vehicle performance by upgrading to K&N filtration.

Product Features:
  • ENGINEERED POWER: State-of-the-art air filter media is designed to increase horsepower and acceleration as well as improve overall engine performance
  • RUGGED CONSTRUCTION: K&N Air Filters are manufactured with durable, premium materials and state-of-the-art construction methods to last a lifetime
  • 4 LAYERS OF PROTECTION: Multiple layers of premium cotton gauze treated with a specially-designed tacking agent work together to create an intricate mesh of engine filter media that is designed to block and trap harmful contaminants
  • CLEAN ONCE EVERY 5 YEARS: Engine air filter only needs cleaning every 75,000 miles under normal highway driving conditions (based on the average miles driven per year of 15,000 miles)
  • ULTIMATE LONGEVITY: No-hassle lifetime warranty on stock replacement K&N air filters- limitations apply
  • EASY INSTALLATION: K&N Air Filters are pre-treated and ready to drop into your factory air box- they are one of the easiest and most cost-effective vehicle upgrades for quick performance gains
  • ECO-FRIENDLY: Using a washable, reusable engine air filter helps reduce replacement air filter waste- a K&N air filter is designed to last longer than 10 or more disposable filters
  • MADE IN USA: K&N Air Filters are proudly made in the USA for trusted quality & reliability
See More

Earls Performance Product – Solo Bleed (Part No.280021ERL)

Solo Bleed

from

$32.59


Product Features:
  • Prevents Air Inclusion
  • Direct Replacement
  • For OE Bleeders
  • One Person Bleeds Safely
  • Without The Mess
  • No Chance Of Air Bubbles
See More

Mr. Gasket – Thermocap Radiator Cap (Part No.2470R)

Thermocap Radiator Cap

from

$48.09
The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

Product Features:
  • Indicates coolant temperature
  • Helps prevent coolant injuries
  • Fahrenheit and centigrade readings
  • Color-coded temperature ranges
  • Integrated coolant reclamation valve
  • Improves under-hood appearance
  • Chromed crown with a colored trim ring
See More

Energy Suspension – Sway Bar Bushing Set (Part No.2.5101R)

Sway Bar Bushing Set

from

$31.99
Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

Product Features:
  • Allows Sway Bar System to Work At 100% Efficiency
  • Zerk Type Fittings
  • Allows for Periodic Greasing
  • Lasts Much Longer Than OEM Rubber Bushings
  • Handling Characteristics Improve Dramatically
See More

Helping You Find the Right Performance and Racing Products for Your Jeep J-4700

You love your J-4700. So we’ve made it easier than ever to help you find Jeep J-4700 Performance and Racing Products in our online catalog. Our inventory holds 19 aftermarket and OEM Performance and Racing Products for your Jeep J-4700, ranging from $22.29 to $504.99.

We offer parts from 9 brands trusted to make quality Performance and Racing Products for your Jeep J-4700. Before you buy, take some time to read through customer reviews. We currently have 263 reviews of Jeep J-4700 Performance and Racing Products from previous customers. Some of the top rated parts include Unilite Ignition Module with 5.0 stars and Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR) with 4.5 stars.

Find your J-4700 Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Jeep J-4700 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Performance and Racing Products Brands for Your Jeep J-4700

Our inventory holds Performance and Racing Products for your Jeep J-4700 from 9 trusted brands. You’ll find OEM and aftermarket parts from brands like Edelbrock, K&N, and FEL-PRO Performance, all of which can keep that Jeep happy.

Top-Rated Edelbrock Performance and Racing Products

Leading Edelbrock Performance and Racing Products

We carry Edelbrock brand parts for your Jeep J-4700 across several catalog categories, including Performance Fuel Systems. Some of our most reviewed Edelbrock parts include:

FAQs for Jeep J-4700 Performance and Racing Products

What are the most purchased Performance and Racing Products for the Jeep J-4700?

Out of 19 Performance and Racing Products for the Jeep J-4700, the most popular in our inventory are:
Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish
from $424.99
(1)
Performer Intake Manifold for 1970-91 AMC, Non-EGR, Satin Finish
Performance Intake Manifolds
Exhaust Manifold Gasket Set
from $31.49
This product is not rated
Exhaust Manifold Gasket Set
Performance Exhaust Manifold Gaskets
Solo Bleed
from $32.59
This product is not rated
Solo Bleed
Performance Brake Bleeders

What are the top-rated Jeep J-4700 Performance and Racing Products?

Top-rated Performance and Racing Products for your Jeep J-4700 based on customer reviews/ratings are:
Unilite Ignition Module
from $85.29
(3)
Unilite Ignition Module
“I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR)
from $427.99
(2)
Thunder AVS Carburetor #1825 650 CFM With Manual Choke, Satin Finish (Non-EGR)
“Put carb on rock crawler. Climb lots of hills and the carb works great. No loss of fuel when climbing steep grade. Does what I bought it to do.”