Jeep Grand Cherokee Ignition and Tune-Up Products

The Denso First Time Fit ignition wire sets are identical in form, fit, color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES specifications. The Denso 7 and 8mm ignition wires are SAE J2031 Class E rated, the highest quality wire used in the industry. These wires can withstand temperatures from -40F to 428 F and pass tests covering everything from electrical properties to shrinkage to chemical resistance and accelerated life testing.

Product Features:

• OE-Equivalent.
• OEM style connectors for easy Installation.
• Carbon fiberglass core for superior conductivity.
• Fiberglass braiding for strength.
• Conductive silicone layer for EMI/RFI noise suppression.
• Silicone insulation for superior dielectric and heat performance.
• Reinforced Kevlar core.

Autolite has over 100 years of engineering experience and has sold over 11 billion plugs. Designed and engineered in the USA, Autolite Double Platinum spark plugs feature platinum-to-platinum firing which virtually eliminates gap erosion, reduces misfires and increases durability of the plug. Consider upgrading to Autolite Iridium XP spark plugs for increased performance.

Product Features:

• Copper-glass seal bonds insulator, terminal post center electrode together; assures full required voltage at spark gap; gas-tight seal (100% leak proof)
• Multi-rib insulator reduces danger of “flash-over”
• One-piece terminal post adds strength
• Resistor reduces radio frequency interference (RFI) and electrode erosion

ACCEL Super Coils feature advanced bobbin technology, highly specialized silicon magnetic steel cores, optimized windings, proper resistance and engineered turn ratios that deliver a high performance, quality coil. Specialized high temperature epoxy resists shock and vibration, while increasing thermal conductivity. These are direct high performance replacements for OEM coils.

Product Features:

• Advanced Bobbin Technology
• Optimized Low Resistance
• Silicon Magnetic Steel E-Core
• Higher Energy/Voltage Outputs
• Quicker Starts
• Improved Idle Quality
• Resists Shock And Vibration
• Resists Corrosion
• 8 Pack

Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:

• Most Advanced Wire By Mallory
• RFI Suppression
• High Temperature Silicone Jacket
• Withstands Over 500+F
• Come In Ready To Use Kits
• Extra Long Kits

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• High-quality products that meet OE appearance and performance to

Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:

• Meets or exceeds all original equipment specifications
• Application specific design to ensure a perfect fit
• Engineered for the sealing repair environment
• Validated for fit, form and function
• Unsurpassed quality you can trust

DENSO First Time Fit COP boot sets are identical in form fit color and performance to the factory-installed boots. Every part of each COP boot set construction meets or exceeds OE/OES standards.

Product Features:

• OE design ensures a tight boot seal that protects against moisture intrusion
• High temperature resistant material provides greater protection against thermal overload
• Stainless steel internal spring with resistor to suppress RFI and deliver maximum voltage to the plug
• Engineered to the specifications used by the original vehicle manufacturer for an exact fit

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

When the original failure-prone wireless ignition module, or wireless ignition node (WIN), on certain Chrysler, Dodge, Jeep and Ram vehicles isn’t functioning properly, the symptoms are more than just inconvenient – they render the vehicle unusable. That’s because the WIN is an integrated electronic receiver that communicates through the powertrain control module (PCM) with multiple onboard convenience and safety systems, including the keyless entry remote and starter. When the WIN fails, the vehicle cannot be started with the keyless remote and the park/shift interlock cannot be disabled. This direct replacement wireless ignition module is designed to match the fit and function of the original module, and will restore the critical communication between the key fob, module and PCM to ensure the operation of those systems and other factory-installed features to original equipment standards. It is manufactured with durable materials and engineered for reliable performance..

Product Features:

• Direct replacement – this wireless ignition module is designed to match the fit and function of the original module on specified vehicle years, makes and models.
• Ideal solution – restores the critical communication between the WIN, key fob, PCM, and the keyless ignition system, and helps ensure the proper operation of other factory-installed systems
• Application specific – engineered and vehicle try-on tested for an exact fit on specified Chrysler, Dodge, Jeep and Ram vehicles
• Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience

This replacement ignition switch actuator pin is engineered to match the fit and durability of the stock actuator pin on specified vehicles. This part has undergone rigorous quality control measures to ensure it conforms to product standards.

Product Features:

• Saves money – this ignition switch actuator pin allows only the damaged part of the steering column to be replaced.
• Time saving solution – no need to replace the entire steering column to restore proper function to the ignition switch.
• Direct replacement – this ignition switch pin matches the fit and function of the original part for a reliable installation
• Quality tested – rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

High-tech glow plugs, pre-start and post-glowing (type GE, type GN) Diesel starting is now quicker, more reliable and more environmentally friendly. BERU is one of the leading manufacturers of glow plugs in the world – and inventor of numerous innovations in Diesel cold start technology The latest diesel car engines are equipped with the innovative three-phase glow technology (pre-heating – heating during starting – post-heating). This means: the glow plug not only heats prior to and during the starting phase, but also up to 180 seconds after starting. This protects the environment and the engine. BERU offers 3-phase glow plugs of the GE and GN type. GE and GN glow plugs in 2-coil technology have not only a heating coil to maintain the optimal heating temperature, but also have a regulator coil that effectively protects the glow plug from overheating. In this way BERU glow plugs are extremely reliable and durable. The GE glow plug is a performance-optimized, controlled glow plug used in engines of the latest generations. The fast heating of the glow plug and the controlled operation are provided by a programmable micro-controller in the glow time control unit.

Product Features:

• Super quick start glow plugs in new, slim shape
• Extremely short pre-heating time: from 2 seconds
• Reliable starting (even at -30C)
• Can be used for post-heating, as a result environmentally friendly: up to 40% less pollutant emissions during the warm up phase
• No more cold start knocking
• Quieter engine running
• Protects the engine during starting

Is your Jeep running rough? Over time ignition parts will deteriorate. It’s easier to replace them now than to have a roadside breakdown in the future. Order high quality ignition parts from Omix-ADA to get your Jeep running smooth again.

Product Features:

• For 5.2L
• OE Style
• Direct Fit
• Limited 5 Year Warranty

Distributor Seal

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

DIS-4 is capable of firing up to four coil packs or four individual coils. Each control delivers full power capacitive discharge sparks from idle through racing rpm. Below 3,000 rpm there is a series of multiple sparks that last for up to 20 degrees of crankshaft rotation to improve idle, starting and throttle response. The adjustable features of the DIS ignitions have also been upgraded with rotary dials. These provide easier, and more precise adjustments of the overrev limiter and the hole shot rev limit. Also, there is now a step retard that can be wired directly to a nitrous system or switch for activation. For use on 6 or 8 cylinder engines with two, three or four coil packs.

Product Features:

• Two Step Rev Control
• Step Retard
• LED Monitor
• Features Are Adjustable w/Rotary Switches

This spark plug non fouler is designed for easy installation on specified vehicles to protect spark plugs from fouling and damage. It is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this spark plug non fouler is designed for easy installation to protect spark plugs from fouling and damage on specified vehicles.
• Ideal solution – this non-fouler preserves spark plug life and is a reliable replacement for an original non-fouler that has failed due to corrosion
• Durable construction – made from quality components to ensure reliable performance and a long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

SYLVANIA Long Life miniature bulbs provide standard performance for your car or truck’s interior and exterior auxiliary lighting. Ideal for use in your car’s back up/reverse, trunk, dome lights and more, Long Life bulbs are a direct replacement for your vehicle. Designed for durability, lower maintenance, and safety in mind.

Product Features:

• DEPENDABLE: Made from high quality materials for long-lasting durability
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
• SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color
• PRO TIP: When changing your bulb, never touch the glass. Always use gloves or a clean shop towel to reduce the transfer of oils during install
• SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

One of the nastiest production engines to come out of Detroit in the last twenty years has to be the late model Hemi and it can get even nastier with the addition of the ultra-high output E3.614 Hemi Coil. With more than double the energy output of a stock coil, E3s Hemi coil features a stainless steel spark plug contact ring and optimized resistance and inductance values which increase output at higher RPM levels. Our high temperature epoxy resists shock and vibration while providing excellent thermal conductivity ensuring extra-long life. Additionally, the spark plug boots are molded in a special high temperature 550 degree F silicone compound. Ideally suited for a wide range of both naturally aspirated and forced induction racing applications, E3.614 fits 5.7L, 6.1L, and 6.4L Hemi engines from 2006 to current model years. When coupled with an E3 Spark Plug featuring DiamondFIRE Technology, youll experience tire shredding power at its finest.

Product Features:

• Double the energy output of a stock coil
• High temperature expoxy provides excellent thermal conductivity and long life
• Stainless steel spark plug contact ring and optimized resistance and inductance provide high output at higher RPM levels
• Fits 5.7L, 6.1L and 6.4L 2006-Current Hemi engines
• Crosses to MSD 8255

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Denso Spark Plug Denso’s standard plugs have always offered a patented U-groove ground electrode producing for a larger, hotter spark. Copper core for better thermal conductivity. Machine rolled threads to reduce cross-threading and seizing . The plug insulator is constructed of purified alumina powder for extreme stress with 5 ribs to prevent flashover.

Product Features:

• U-Groove Ground Electrode Promotes Ignitability and Decreases Quenching
• Fully Projected Insulator Reduces Carbon Fouling
• Machine Rolled Threads Prevent Seizing or Cross Threading During Installation and Removal
• 100% Pre-Fired to Assure the Highest Quality Possible
• Purified Alumina Powder Insulator Provides Exceptional Strength and Thermal Conductivity
• Five Rib Insulator Prevents Flashover
• Copper-Glass Seal Bonds Center Electrode and Insulator for a Gas-Tight Seal

Distributor Cap and Rotor Kit

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.