Your Jeep Grand Cherokee will be happy to know that the search for the right Blower Motor Resistor products you’ve been looking for is over! Advance Auto Parts has 34 different Blower Motor Resistor for your vehicle, ready for shipping or in-store pick up. The best part is, our Jeep Grand Cherokee Blower Motor Resistor products start from as little as $13.99.
When it comes to your Jeep Grand Cherokee, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Blower Motor Resistor product and part brands so you can shop with complete confidence. Some of our top Blower Motor Resistor product brands are BWD, and Dorman - OE Solutions. We’re sure you will get the right product to keep that Grand Cherokee running for a long time.
We even have reviews of our OEM and aftermarket Blower Motor Resistor products to help you buy with confidence. Hear from other customers via the 3,166 reviews on parts for your Jeep Grand Cherokee.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Blower Motor Resistor products for your Grand Cherokee, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Use the fitment form at the top of the page to select your exact year and engine type for your Jeep Grand Cherokee.
Submitted 2019-07-18
By Christine
From Undisclosed
Working great
Bottom Line NULL
Submitted 2019-04-08
By Timothy
From Undisclosed
Solved the blower problem. Easy install.
Bottom Line NULL
Submitted 2017-11-29
By Wayne
From undisclosed
Wish that I had realized how easy a fix this was before going all summer with no A/C. Perfect fit to replace OEM unit - although it looks a bit different.
Bottom Line NULL
from $93.99
View ProductSubmitted 2020-10-02
By David
From Undisclosed
Worked great, no issues
Bottom Line NULL
Submitted 2019-03-20
By Daniel
From Undisclosed
Perfect replacement part. Works perfectly.
Bottom Line NULL
Submitted 2017-12-30
By dancer1201
From Omaha, Ne
It is is crazy that one little part, and such a cheap part at that, fixed my heat/air issue. My heat would only blow on high (the fan) and that would result in me getting too hot and getting annoyed by the loud noise. I replaced this blower resistor and voila! Heat and air works evenly on all levels now, and this was so perfect. I recommend!
Bottom Line recommended
from $13.99
View ProductSubmitted 2017-06-09
By DEBBIE
From undisclosed
exact fit
Bottom Line NULL
from $151.99
View ProductSubmitted 2017-08-25
By mustbme
From Opelika, AL
If fan runs after install but little air movement then the wires on the included pigtail (module to fan motor) are likely reversed. Remove retainer on either end of pigtail, reverse wires, and snap retainer back in place. This is an intelligent PWM (Pulse Width Modulation) motor speed controller that replaces similar OEM module - not a "Resistor" as described. I've installed two, pigtail wiring was reversed on both, but swapping is really easy.
Bottom Line recommended
from $131.99
View ProductSubmitted 2020-10-13
By John
From Undisclosed
Got these for my 2016 Mazda CX-5 2.5 L originals had 108,000 miles no issues. Owners manual specifies using Mazda spark plugs, stealer wanted $40 per plug, not gonna happen, a little research and exact match. 300+ miles no issues/codes that's why 4 stars, if I get 100,000 miles 5 stars . Definitely reasonably priced and had a coupon, no brainer.
Bottom Line NULL
Submitted 2020-10-05
By Justin
From Undisclosed
I bought these for my Mazda 3 2013, after doing extensive comparison I found these were the best for my car, I installed them and everything so far had been perfect, didn't need to gap them or anything just install and torque them.
Bottom Line NULL
Submitted 2020-09-11
By Brian
From Undisclosed
Replaced OEM plugs on Mazda 3. Essentially similar product as OEM. They work well.
Bottom Line NULL
from $106.99
View ProductSubmitted 2020-10-11
By John
From Undisclosed
Installed with no issues an worked perfect
Bottom Line NULL
Submitted 2020-09-21
By Lex
From Undisclosed
Easy install, good quality
Bottom Line NULL
Submitted 2020-03-04
By Donald
From Undisclosed
Fits perfect and runs perfect. Replaced in my 2004 Dodge Ram 2500.
Bottom Line NULL
from $54.99
View ProductSubmitted 2018-05-16
By Donald
From undisclosed
Solved my one speed blower motor.
Bottom Line NULL
from $39.99
View ProductSubmitted 2020-02-21
By Darrell
From Undisclosed
N/A
Bottom Line NULL
Submitted 2019-12-24
By donald
From Undisclosed
Worked perfectly
Bottom Line NULL
from $37.99
View ProductSubmitted 2018-10-10
By Timothy
From Undisclosed
excellent fit, great price
Bottom Line NULL
Submitted 2017-07-19
By Joseph
From undisclosed
this my second one from your store !!
Bottom Line NULL
Submitted 2017-07-09
By Gale
From undisclosed
Only one speed on your blower? This worked for my 2001 Dodge ram 1500. Easy to change and worked great.
Bottom Line NULL
from $53.99
View ProductSubmitted 2018-02-26
By SALVADOR
From undisclosed
Perfect came with all wirering to upgrade
Bottom Line NULL
Submitted 2018-02-24
By Tony
From undisclosed
Used this to repair my 01 Jeep Grand Cherokee, it restored the fan motor operation after the original resistor wiring had melted and left me without any Blower speed. It actually works better now than it ever has, plenty of blower force since the replacement..
Bottom Line NULL
Submitted 2018-02-03
By Eric
From Elizabethtown, PA
The install was relatively easy. You will need to small screws to connect the resitor block to the mounting plate. The next problem was the fan running backwards and not moving much air. To fix the fan problem remove the harness between the resistor block and the fan. Next insert a small screw driver into the front of the plug between the flat side of the blade connector and the plug housing to release the tab holding the connector in the housing. After removing both connectors make sure the tabs are bent out so they will hold when reinserted and then reinsert the connectors so they are opposite the wires in the other plug. Reinstall the harness and the fan shuld blow air properly. To save time compare the new fan harness to the old fan harness to match the polarity of the plug.
Bottom Line recommended
from $119.99
View ProductSubmitted 2016-07-24
By Jar
From Ct
It works as should
Bottom Line recommended
Submitted 2013-02-13
By Phil
From St. Paul, MN
The product was simple to install and in a matter of replacing the part in about 3 min I went from 1 blower motor speed to 4....
Bottom Line recommended
from $119.99
View ProductSubmitted 2019-06-20
By John
From Undisclosed
This was the correct part for a 2006 Chrysler Pacifica. The first module I purchased, which was supposed to be correct according to several auto parts retailers, did not fit at all. That's probably not Advanced fault but i would have given five stars if I hadn't have put so much work into before finding it was not correct.
Bottom Line NULL
Submitted 2017-11-20
By Mike
From undisclosed
perfect fit
Bottom Line NULL
Submitted 2017-10-08
By Trevor
From undisclosed
I got one of these and it didn't work -- the fan blew all the time, I could literally not turn it off. Got a 2nd one and it works great, so 50/50 on working/not working. The original was French (Valeo), this replacement is Chinese. Does not appear that they do 100% quality control testing on these things. So basically, get one if you need it, but be prepared to return it and get another if it's defective.
Bottom Line NULL
from $75.99
View ProductSubmitted 2018-12-07
By jeepster
From kcmo
I started out my heater fan was inop. I tried domain resistor and I only had high speed so I tried a second one seem thing Up graded to a BWD resister and everything works like it should.
Bottom Line not recommended
Submitted 2016-06-22
By Rich
From Marion, Ohio
Blower motor works again.
Bottom Line recommended
Submitted 2015-06-18
By Joel the parts replacer
From Huntsville, AL
I have replaced four of these now. Drop the glovebox and it's right there. Two 8mm screws and it's in and out. NOW - the REASON these things fail is because the blower motors get tired and pull too much juice. So if you only replace this resistor, you'll be doing it again. Do yourself a favor and REPLACE THE BLOWER MOTOR and then your replacement resistor will never fail again. YOU MUST REPLACE THE BLOWER MOTOR TOO. I'm honestly surprised the manufacturer doesn't require this. Now... as to this part, after I REPLACED THE BLOWER MOTOR :), the first one I got was intermittent; it would only vary between 40-60% blower speed. So I returned it and the second one works perfectly. So a not-so-great review on this part. I installed two BWD resistors in other vans and they work fine.
Bottom Line recommended
from $83.99
View ProductSubmitted 2017-08-13
By Collins
From undisclosed
Plastic pieces....avg...
Bottom Line NULL
from $83.99
View ProductSubmitted 2013-12-13
By jasonha9000
From shelbyville mi
Little over a year old and the resistor has failed again. Original one lasted way longer than that. I paid over a hundred bucks for it. You would think you are paying for quality. Cause if you search you can find it a lot cheaper and I am sure its probably the same one.
Bottom Line not recommended
Submitted 2011-08-27
By cmp1313
From new york ,NY
this product does not work. once installed works for 2 secs then shuts off. you're better off going to the dealer and buying the factory part which belive it or not is cheaper only [$] and actually works.plus its a factory part.dont waste time and money ordering this.
Bottom Line not recommended
Submitted 2011-07-18
By Quick Fix
From Houston, TX.
With a little bit of research and comparing of symptoms to my problem, fixed my A/C in less than 5 min. Ordered the part on-line in the evening, it was ready for store pick up the next day on my way home from work.
Bottom Line recommended
from $69.99
View ProductSubmitted 2020-07-08
By David
From Undisclosed
I ordered it based on the vehicle selector. The part so received was completely the wrong part for my vehicle. The correct resistor wasn't even a optional part selection. I had to research which vehicles use the correct resistor and find the part. I have a Dodge Charger R/T and had to say I have a Durango to find the correct part. It was back ordered also.
Bottom Line NULL
from $115.99
View ProductSubmitted 2015-02-28
By Wolfbane
From Ct.
Found elsewhere for one quarter of the price.
Bottom Line not recommended
from $109.99
View Productfrom $179.99
View Productfrom $149.99
View Productfrom $138.99
View Productfrom $119.99
View Productfrom $117.99
View Productfrom $107.08
View Productfrom $104.99
View Productfrom $96.58
View Product