Jeep DJ3 Drivetrains
Top Jeep DJ3 Drivetrains Categories
We carry over 42 Drivetrains in inventory for the Jeep DJ3. If you’re looking for aftermarket Drivetrains for your Jeep DJ3, check out all these categories:
Essential Jeep DJ3 Drivetrains
National – Shaft Repair Sleeve (Part No.99125)
from
$30.49
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
Omix – Front Axle Hub Assembly; 41-68 Ford GPW/Willys/CJ Models (Part No.16705.03)
from
$121.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Hub Only
- OE Style
- Direct Fit
Omix – Axle Snap Ring (Part No.18670.35)
from
$1.79
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year manufacturers warranty.
Product Features:
See More
Product Features:
- OE Style
- Direct Fit
- Steel
- Corrosion Resistant
- Limited 5 Year Warranty
Yukon Gear – Wiper Kit Small With 8 Retaining Bolts, Dana 25, Dana 27, Dana 30, & Dana 44 (Part No.32302)
from
$138.99
Wiper kit SMALL w/8 retaining bolts, Dana 25, Dana 27, Dana 30, & Dana 44.
Product Features:
See More
Product Features:
- Fits Dana Spicer 25, 27, 30 and 44 front
- 8 bolt design
- Services one side
Rugged Ridge – Locking Hub (Part No.15001.01)
from
$286.99
Approved as original equipment by vehicle manufacturers and militaries world wide, these tough hubs are built to last. A hardened nylon center is used instead of metal to keep you moving in the rare case of a hub failure.
Product Features:
See More
Product Features:
- Impact Resistant Nodular Iron
- Corrosion Resistant
- Better 4WD Performance
- Better Fuel Economy
- Easy Install
Omix – Differential Cover Gasket; for Dana 25/27/30 (Part No.16502.01)
from
$6.49
Is your Jeep differential cover leaking? Do you need to seal it up after some work? Omix-ADA has the OE quality differential gaskets you need.
Product Features:
See More
Product Features:
- Rubber
- Sold Individually
- OE Style
- Direct Fit
Omix – T90 Front Input Bearing (Part No.18880.04)
from
$55.99
Is your T90 transmission not shifting right? Do you cringe from the grinding noises when you shift? Omix-ADA has the T90 internal parts you need to fix your Jeep’s transmission. Fix it and enjoy your drive.
Product Features:
See More
Product Features:
- Front
- OE Style
- Direct Fit
National – Tapered Roller Bearing Cone (Part No.LM501349)
from
$19.99
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Bearing Race (Part No.HM88610)
from
$15.49
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Omix – Rear U-Bolt; for Dana 44; 41-71 Willys/Jeep Models (Part No.18204.01)
from
$22.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA.
Product Features:
See More
Product Features:
- Rear
- OE Style
- Direct Fit
FAG US – Shaft Seal (Part No.SS2633)
from
$28.99
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Crown Auto Jeep Replacmnt – Transfer Case Gasket & Seal Kit, with Dana 18 Transfer Case (Part No.J0923300)
from
$27.99
Crown Automotive continues to be the leader in quality replacement parts for Jeep(R) vehicles. Crown has the largest stock of replacement parts for Jeep(R) vehicles, including factory discontinued parts. In fact, many of the older Jeeps are still on (and off) the road thanks to Crown parts. The Crown line consists of axle, body, brake, clutch, cooling, driveline, electrical, engine, exhaust, fuel, steering, suspension, transmission And transfer case components. Crown Automotive also offers an exclusive line of component kits And accessory products.
Product Features:
See More
Product Features:
- Kit Includes Gaskets And Seals
- Limited 12 Month Or 12,000 Mile Warranty
National – Manual Transmission Input Shaft Seal (Part No.482208)
from
$7.79
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; single-lip
- Temperature range: -40 Deg. F to 225 Deg. F / -40 Deg. C to 107 Deg. C
- Good low temperature capability
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Needa Parts – Standard Engine Oil Drain Plug: 7/8 " -16 Thread, 1-1/8 " Head (sold by each) (Part No.090-018)
from
$11.29
This engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles. It is engineered to replace a missing or damaged plug and help ensure a secure seal.
Product Features:
See More
Product Features:
- Direct replacement – this engine oil drain plug is designed to match the fit and function of an original equipment plug on specified vehicles
- Ideal solution – engineered to replace a missing or damaged plug and help ensure a secure seal
- Durable construction – designed and manufactured to strict specifications for reliable performance
- Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
Neapco – Universal Joint (Part No.1-0154)
National – Multi-Purpose Bearing (Part No.206-L)
from
$30.99
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Powertrax – Lock Right Locker (Part No.2115-LR)
from
$425.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!
Product Features:
See More
Product Features:
- Powertrax® proves that you don’t have to choose between the superior traction of a locking differential and smooth handling and drivability of an open differential. Powertrax Lock-Right Lockers, No-Slip Traction Systems and GRIP limited slip differentials and lockers give you the best of both worlds!
- The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
- Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
- Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
- Powertrax® = Extreme Traction Systems!
National – Multi-Purpose Seal (Part No.5778V)
from
$69.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -40 Deg. F to 400 Deg. F / -40 Deg. C to 204 Deg. C
- Excellent high temperature capabilities
- Compatible with wide range of fluids
- Delivers quality and reliable performance for every type of repair
National – Tapered Roller Bearing Cone (Part No.02872)
from
$24.79
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Multi-Purpose Bearing (Part No.208-L)
from
$46.49
Product Features:
See More
- BUILT TO LAST: Advanced heat treatment process for strength
- PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Tapered Roller Bearing Cone (Part No.HM88649)
from
$19.79
Manufactured with premium-grade steel, National taper bearing cones feature crowned raceways and rollers to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways and rollers for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
National – Shaft Repair Sleeve (Part No.99155)
from
$38.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Dorman – Spindle Nut (Part No.615-126.1)
from
$17.79
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Standard Spindle Nut 1 In.-5/8 In.-16 Hex 2-1/16 In. (sold by each) (Part No.615-126)
from
$10.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Jeep DJ3 Drivetrains Categories
Helping You Find the Right Drivetrains for Your Jeep DJ3
You love your DJ3. So we’ve made it easier than ever to help you find Jeep DJ3 Drivetrains in our online catalog. Our inventory holds 42 aftermarket and OEM Drivetrains for your Jeep DJ3, ranging from $1.79 to $425.99.
We offer parts from 12 brands trusted to make quality Drivetrains for your Jeep DJ3. Before you buy, take some time to read through customer reviews. We currently have 340 reviews of Jeep DJ3 Drivetrains from previous customers. Some of the top rated parts include Universal Joint with 4.0 stars and Universal Joint with 1.0 stars.
Find your DJ3 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Jeep DJ3 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Jeep DJ3
Our inventory holds Drivetrains for your Jeep DJ3 from 12 trusted brands. You’ll find OEM and aftermarket parts from brands like National, Omix, and FELPRO, all of which can keep that Jeep happy.
We have Omix parts available for your Jeep DJ3 in categories like Differentials and Transfer Cases. Some of the top-rated Omix parts in these categories are:
from
$4.29
(3)
Dana 18 Compatible Transfer Case Gasket; 41-71 Willys/Jeep Models
Transfer Case Gaskets
Top-Rated National Drivetrains
Leading National Drivetrains
We carry National brand parts for your Jeep DJ3 across several catalog categories, including Drive Shafts and Axles. Some of our most reviewed National parts include:
FAQs for Jeep DJ3 Drivetrains
What are the most purchased Drivetrains for the Jeep DJ3?
Out of 42 Drivetrains for the Jeep DJ3, the most popular in our inventory are:
What are the top-rated Jeep DJ3 Drivetrains?
Top-rated Drivetrains for your Jeep DJ3 based on customer reviews/ratings are:
from
$4.49
(1)
Universal Joint
“Rubicon uses a 1330 series u joint, not a 1310 series that this joint is. The correct one is a 2-4800 (spicer part #5-213x). The 2-4800 joint is also”
