Jeep CJ6 Performance and Racing Products

Essential Jeep CJ6 Performance and Racing Products

Omix – Regular Clutch Kit (Part No.16901.02)

Regular Clutch Kit

from

$339.99
Is your clutch chattering or slipping? Maybe you are just replacing the clutch while you have the engine or transmission out? Omix-ADA offers a Regular clutch kit for your Jeep that includes the pressure plate, clutch disc, and throw-out bearing.

Product Features:
  • 9.25 in.
  • OE Style
  • Direct Fit
See More

Accel – Custom Fit Spark Plug Wire Set (Part No.8843)

Custom Fit Spark Plug Wire Set

from

$112.99
These ACCEL wire sets are custom tailored for true street and strip performance use. Features oversize 8.8 mm ultra performance wires and spark plug boots, 550 degrees Fahrenheit double silicone construction with fiberglass braid. Spiral wound steel core conductor.

Product Features:
  • 8.8mm Graphite Suppression
  • Silicone Spark Plug Boots
  • 550 Degree Double Silicone Construction
  • Fiberglass Braid
  • Carbon/Graphite Core
  • Magnetic Suppression
  • Fiberglass/Kevlar Core
  • 500 Ohms Resistance
See More

B & M – Automatic Shifter, Quicksilver 4 Speed (Part No.80683)

Automatic Shifter, Quicksilver 4 Speed

from

$439.99
The B&M Quicksilver features a ratcheting action for positive shifts, Chrome Knob, neutral safety switch, NHRA/IHRA approved Reverse Lockout. Fits Most 3 and 4 speeds.

Product Features:
  • Universal Floor Mount Application
  • Base Trimmed For Custom Fit
  • Cable Operated
  • Quick Installation
  • Accurate Shifting
See More

Edelbrock – RPM Air-Gap AMC 304/360/401 Intake Manifold (Part No.7531)

RPM Air-Gap AMC 304/360/401 Intake Manifold

from

$504.99
Edelbrock part #7531 RPM Air-Gap AMC intake manifold is designed for 1970-91 304-401 c.i.d. V8 applications. The RPM Air-Gap intake manifold incorporate the same race-winning technology as our Victor Series competition intakes. The air-gap design features

Product Features:
  • Based on Performer RPM-Series with Unique Air Gap
  • Air Gap Cooler and Denser Mixture for More Power
  • Designed for 1500 to 6500 RPM Street-Driven Power
  • Dual-Plane High-Rise Intake w/180 deg Firing Order
  • Produces Incredible Top-End Horsepower
  • Retains Good Throttle Response and Acceleration
  • Includes Std Oil Fill ; PCV ; A/C Accy Bosses
  • Not for Exhaust-Heat Chokes – No Exhaust Crossover
See More

Omix – Manual Steering Pitman Arm (Part No.18006.30)

Manual Steering Pitman Arm

from

$42.99
Is your Jeep’s steering loose? Are your tires wearing in an uneven pattern? Chances are that some of your steering components are worn. Fixing them is cheaper than replacing your tires and it’s a whole lot safer too.

Product Features:
  • Steel
  • OE Style
  • Direct Fit
See More

Omix – Oil Pan Gasket (Part No.17439.08)

Oil Pan Gasket

from

$16.99
Is your Jeep’s oil pan gasket leaking? Or, are you rebuilding an engine and need a fresh gasket? Omix-ADA offers high-quality replacement oil pan gaskets that will give you years of service and get you back on the road.

Product Features:
  • Cork
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

B & M – Torque Converter, Nitrous Holeshot 3600 (Part No.20482)

Torque Converter, Nitrous Holeshot 3600

from

$665.99
Nitrous Holeshot Converters are Built with the same features as the other B&M Holeshots, with the addition of anti-balloon plates. The anti-balloon plates will allow these converters to stand up to the instant horsepower nitrous delivers.

Product Features:
  • 3400-3800 RPM
  • Small And Big Blocks
  • Serious Performance
  • Furnace Brazed
  • Fully Balanced
See More

Rancho – Steering Damper Bracket (Part No.RS5508)

Steering Damper Bracket

from

$80.99
Rancho® high-performance steering stabilizers are a simple and affordable way to enhance a vehicle’s performance. Rancho® steering stabilizers are ideal for off – road driving, towing/hauling and street performance applications. Rancho® steering stabilizers are engineered for vehicles with oversized wheels and tires which reduce wheel shimmy, bump steer and vibration. They are available in single and dual configurations with bracket kits available for vehicles without OE mounts. Rancho® steering stabilizers are made with a liquid metallic finish which provides a premium long lasting finish along with a boot that protects the shock rod and oil seal. Rancho® steering stabilizers are covered by our limited lifetime warranty that guarantees your investment. Check our website to find the Rancho® steering stabilizers RS5000¿ part numbers for your vehicle.

Product Features:
  • Black powder coated for visual appeal
  • CNC cut or bent
  • Steel thickness
  • Direct bolt to factory steering linkage
  • Designed for dual steering stabilizer
See More

Omix – Camshaft Kit (Part No.17420.01)

Camshaft Kit

from

$359.99
Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

Product Features:
  • Includes Cam Shaft; Lube And Lifters
  • OE Style
  • Direct Fit
  • Limited 5 Year Warranty
See More

Spectre – Diff Cover Dana 30 (Part No.6081)

Diff Cover Dana 30

from

$52.99
Spectre’s Differential Covers are made to OEM specifications and are triple chrome plated for a lasting shine. Designed to protect the intricate moving parts of the differential, Spectre’s covers add an extra layer of protection to the vehicle’s underside. Featuring a 10-bolt design and fits 1999-2003 Dodge Dakota/Durango four wheel drive front, 1966-1970 Ford Bronco four wheel drive front, 1941-2003 Jeep CJ front, 1960-1974 IHC Scout front, and 1960-1967 IHC Scout rear differentials. Includes 10 SAE standard chrome bolts for installation. You’ll need to supply your own bolts if your application requires metric bolts.

Product Features:
  • 10 chrome 5/16 inch -18 x 3/4 inch differential cover bolts included
  • Bolts and gasket included
  • Triple chrome plated for a lasting shine
  • Precision engineered for a perfect fit
See More

Flowtech – Standard Header (Part No.13550FLT)

Standard Header

from

$281.99


Product Features:
  • Fuel Economy From The Engine
  • Leak Test For Max Performance
  • Mandrel-Formed Power Plenum
  • Leakproof O-Ringed Port Seals
  • Include All Mounting Hardware
See More

Edelbrock – Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79 (Part No.5792)

Sure Seat Valve Springs for Chrysler 383-400-413-440 V8 1969-79

from

$141.99
Product Features:
  • Non-Rotator Type
  • 1.550 in. Outer Diameter
  • .190 Wire Size
  • Single Coil Spring Type
  • Set of 16
See More

Mr. Gasket – High Performance 180 Degree Thermostat for Increased Flow (Part No.4364)

High Performance 180 Degree Thermostat for Increased Flow

from

$26.99
Mr. Gasket High Performance Thermostats are designed to resist large variations of coolant pressure at high RPM (revolutions per minute). This allows them to fully open at correct temperature consistently regardless of engine RPM. The design also provides the high flow that engines operated a higher RPM need. This thermostat also features a copper/brass construction to further resist corrosion. Mr. Gasket High Performance / High Flow Thermostats are suitable for street, drag race, or oval track applications.

Product Features:
  • Opens At 180 Degrees
  • Designed to Resist Large Variations of Coolant Pressure at High RPM
  • Fully Opens at Correct Temperature Consistently Regardless of Engine RPM
  • For High Performance Street, Drag Race, and Oval Track
  • Copper & Brass Construction – Resists Corrosion
  • High Flow
See More

Mallory – Unilite Ignition Module (Part No.605)

Unilite Ignition Module

from

$85.29
Mallory’s UNILITE (R), and magnetic breaker less ignition modules are self contained module assemblies which have no moving parts to wear out. Using Mallory’s time tested breaker less ignition circuit, combined with modern surface mount thermal-clad construction, these ignition modules can drive both OEM and high performance ignition coils. For best results always use a Mallory PROMASTER coil or a Mallory chrome electronic ignition coil. These are also an excellent choice for triggering one of the Mallory HyFire series of electronic ignition controls. Hookup is as easy as a three wire connection.

Product Features:
  • Service Part
  • No Moving Parts To Wear Out
  • Self Contained Unit
  • Can Drive OEM
  • Can Drive High Performance Ignition Coils
See More

Powertrax – Lock Right Locker (Part No.2415-LR)

Lock Right Locker

from

$442.99
The Powertrax Lock-Right ultra-strength alloy locker’s straight-line performance is equal to a solid spool, but automatically unlocks in turns. Best suited for extreme off-road to severe on-road use, Powertrax Lock Right lockers replace the spider gears in your open differential carrier using basic tools and without affecting your ring and pinion settings. The whole job can be done in your driveway in a couple of hours, pin included! Powertrax Grip-Lok, Lock-Right Lockers and No-Slip Traction Systems automatically provide 100% traction on-demand, under the toughest circumstances. The Powertrax Grip-Pro and Grip-LS performance limited slips offer smooth dependable torque transfer and traction for the best of both worlds!The Powertrax® Lock-Right Locker provides outstanding traction for off-road machines and race vehicles. Powertrax No-Slip Traction Systems deliver excellent performance to street-driven cars and trucks.
  • Powertrax® lockers range from the original, Lock-Right for serious straight-line performance, to the No-Slip traction system for street-able vehicles.
  • Powertrax® offers three levels of GRIP locking differentials, ranging from the clutch-type GRIP LS with a forged steel case, the gear-driven GRIP PRO and finally the GRIP LOK for extreme traction.
  • Powertrax® = Extreme Traction Systems!
  • See More

    Accel – Cap/Rotor (Part No.8330)

    Cap/Rotor

    from

    $66.99
    ACCEL cap and rotor kits offer superior protection from “arc-thru” and crossfire. Features 60k V-rated alkyd compound, stress-relieved at molding to ensure stability. Brass inserts and steel rotor springs provide for high spark energy flow.

    Product Features:
    • See catalog for application information
    • Features 60K V Rated Alkyd Compound
    See More

    Omix – Cylinder Head Gasket (Part No.17446.10)

    Cylinder Head Gasket

    from

    $49.49
    Is your Jeep’s cylinder head gasket leaking? Or, are you rebuilding an engine and need a fresh gasket? Omix-ADA offers high-quality replacement cylinder head gaskets that will give you years of service and get you back on the road.

    Product Features:
    • Composite
    • OE Style
    • Direct Fit
    • Limited 5 Year Warranty
    See More

    Mallory – Mallory Kit: Unil Conv: Delco: V8 (Part No.501)

    Mallory Kit: Unil Conv: Delco: V8

    from

    $134.99
    Put an end to high maintenance point ignition systems by installing a proven Mallory Unilite ignition conversion kit. Features at a glance, improves performance and fuel efficiency, easy to install with simple hand tools, reduced maintenance and is available for all popular 12-volt negative ground domestic cars and trucks.

    Product Features:
    • Easy Installation
    • Improved Fuel Economy
    • Reduced Maintenance
    • Accurate Timing
    • Improved Performance
    • Provides A Simple Conversion
    • No Moving Parts To Wear Out
    See More

    Energy Suspension – Sway Bar Bushing Set (Part No.2.5101R)

    Sway Bar Bushing Set

    from

    $31.99
    Energy Suspension performance polyurethane sway bar bushings and end links offer the greatest improvement in performance among all the products Energy offers. They make a vehicle’s sway bar system much more effective like adding a larger, higher performance sway bar! Economy, increased efficiency, and easy installation are just some of the reasons these products are so popular. Made of Hyper-Flex polyurethane that lasts much longer than O.E.M. rubber bushings.

    Product Features:
    • Allows Sway Bar System to Work At 100% Efficiency
    • Zerk Type Fittings
    • Allows for Periodic Greasing
    • Lasts Much Longer Than OEM Rubber Bushings
    • Handling Characteristics Improve Dramatically
    See More

    Accel – Supercoil (Part No.140001)

    Supercoil

    from

    $105.99
    Engineered for faster rise time, longer spark duration and increased performance. Unique design with premium grade wire, special low resistance, high turns ratio windings. Produces higher spark energy with breakerless electronic ignition systems. For points application the supplied 0.85 ohm ballast resistor must be used in conjunction with the vehicle original ballast resistor, if so equipped. Oversized molded case with integral cooling fins and high capacity oil filled construction provide high thermal conductivity ensuring cool operation and long life. Extra tall tan Alkyd tower and integral voltage dam eliminate “flashover” to primary terminals. Comes complete with mounting hardware and 0.85 ohm ballast resistor. Effective up to 6,500 RPM.

    Product Features:
    • Oil Filled For Better Cooling
    • Optimized Low Resistance
    • Silicon Magnetic Steel E-Core
    • Higher Energy/Voltage Outputs
    • Quicker Starts
    • Improved Idle Quality
    • Resists Shock And Vibration
    • Resists Corrosion
    See More

    Rancho – U-Bolt Kit (Part No.RS713)

    U-Bolt Kit

    from

    $62.99
    Replace your old or broken U-bolts with these high strength Rancho replacement U-bolt kits. These kits will work with a stock or an aftermarket leaf spring pack.

    Product Features:
    • These replacement U-bolts are for Rancho suspension systems only. Do not use them on other suspension kits.
    • After 100 miles of use and after every off-road use, inspect all U-bolts for proper torque values.
    • Made from high strength steel
    • Works with a stock or an aftermarket leaf spring pack
    • Sold in a master quantity of 15
    See More

    Edelbrock – Signature Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Chrome Steel (Part No.4431)

    Signature Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Chrome Steel

    from

    $75.99
    The Edelbrock #4431 Signature Series Valve Covers are designed for AMC/Jeep 290-304-343-360-390-401 V8 ’67-91 applications. Engineered for function and styled for great looks, Signature Series valve covers have stock-style breather baffles that prevent oil passage to the PCV valve. These quality valve covers accept all emissions equipment, including PCV valve holes. Rubber grommets for the breather and PCV valve holes are included. Matching breathers sold separately.

    Product Features:
    • AMC/Jeep 290-401 V8 1967-91
    • Short
    • Chrome Steel
    • Set Of Two
    • Rubber Grommets For Breather
    See More

    Omix – Camshaft (Part No.17421.07)

    Camshaft

    from

    $175.99
    Direct OE replacement Jeep parts and accessories built to the original specifications by Omix-ADA. Limited five year Manufacturer’s warranty.

    Product Features:
    • Made To OE Spec
    • Direct Fit
    • Limited 5 Year Warranty
    See More

    Mr. Gasket – Thermocap Radiator Cap (Part No.2476BK)

    Thermocap Radiator Cap

    from

    $48.09
    The fastest, easiest way to know exactly when it’s safe to open your radiator cap. ThermoCap, with its built-in calibrated thermometer, indicates the coolant temperature.

    Product Features:
    • Indicates coolant temperature
    • Helps prevent coolant injuries
    • Fahrenheit and centigrade readings
    • Color-coded temperature ranges
    • Integrated coolant reclamation valve
    • Improves under-hood appearance
    • Chromed crown with a colored trim ring
    See More

    FEL-PRO Performance – Exhaust Manifold Gasket Set (Part No.1434)

    Exhaust Manifold Gasket Set

    from

    $31.49
    Fel-Pro Performance Gaskets deliver reliable sealing under grueling racing conditions

    Product Features:
    • Performance exhaust header gasket consisting of a high-density fiber facing material attached to both sides of a perforated steel core.
    • Resists blowout and burnout from high-temperature exhaust and is far stronger than basic paper gaskets.
    • Anti-stick coating permits motion without damaging the gasket and makes it easier to remove the gasket for future engine service.
    • Slotted bolt holes allow for easier header installation.
    • Not intended for use in emission controlled vehicles.
    See More

    Helping You Find the Right Performance and Racing Products for Your Jeep CJ6

    You love your CJ6. So we’ve made it easier than ever to help you find Jeep CJ6 Performance and Racing Products in our online catalog. Our inventory holds 54 aftermarket and OEM Performance and Racing Products for your Jeep CJ6, ranging from $16.99 to $825.99.

    We offer parts from 15 brands trusted to make quality Performance and Racing Products for your Jeep CJ6. Before you buy, take some time to read through customer reviews. We currently have 3,083 reviews of Jeep CJ6 Performance and Racing Products from previous customers. Some of the top rated parts include Blaster 2 Coil: High Performance Ignition Upgrade with 4.3 stars and Unilite Ignition Module with 5.0 stars.

    Find your CJ6 Performance and Racing Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Jeep CJ6 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

    Top Performance and Racing Products Brands for Your Jeep CJ6

    Our inventory holds Performance and Racing Products for your Jeep CJ6 from 15 trusted brands. You’ll find OEM and aftermarket parts from brands like Accel, Mr. Gasket, and Edelbrock, all of which can keep that Jeep happy.
    We have B & M parts available for your Jeep CJ6 in categories like Performance Engines. Some of the top-rated B & M parts in these categories are:
    Tork Master 2400
    from $339.99
    (1)
    Tork Master 2400
    Performance Torque Converters
    Tork Master 3000
    from $499.99
    (1)
    Tork Master 3000
    Performance Torque Converters

    Top-Rated Accel Performance and Racing Products

    Leading Accel Performance and Racing Products

    We carry Accel brand parts for your Jeep CJ6 across several catalog categories, including Performance Ignition Products and Performance Distributors. Some of our most reviewed Accel parts include:
    Distributor Cap And Rotor Kit
    from $48.49
    (1)
    Distributor Cap And Rotor Kit
    Performance Distributor Cap and Rotor Kits

    FAQs for Jeep CJ6 Performance and Racing Products

    What are the most purchased Performance and Racing Products for the Jeep CJ6?

    Out of 54 Performance and Racing Products for the Jeep CJ6, the most popular in our inventory are:
    High Performance 180 Degree Thermostat for Increased Flow
    from $26.99
    (20)
    High Performance 180 Degree Thermostat for Increased Flow
    Performance Engine Coolant Thermostats
    Thermocap Radiator Cap
    from $48.09
    This product is not rated
    Thermocap Radiator Cap
    Performance Radiator Caps
    Signature Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Chrome Steel
    from $75.99
    This product is not rated
    Signature Series Valve Covers: AMC/Jeep 290-401 V8 1967-91, Chrome Steel
    Performance Valve Covers

    What are the top-rated Jeep CJ6 Performance and Racing Products?

    Top-rated Performance and Racing Products for your Jeep CJ6 based on customer reviews/ratings are:
    Blaster 2 Coil: High Performance Ignition Upgrade
    from $49.99
    (20)
    Blaster 2 Coil: High Performance Ignition Upgrade
    “Had one before and blew it up, good easy replacement. MSD makes a good product.”
    Unilite Ignition Module
    from $85.29
    (3)
    Unilite Ignition Module
    “I like the Unilite product because it is so small and compact compared to the HEI stuff I normally use. If you are restricted on space Its a great pro”
    Mallory Kit: Unil Conv: Delco: V8
    from $134.99
    (1)
    Mallory Kit: Unil Conv: Delco: V8
    “I had my 66 LeMans 326 engine rebuilt. After the install, which was easy to do, and following the instructions the engine fired right up. Now I won’t ”