Jaguar XJR Steering and Chassis Parts
Top Jaguar XJR Steering and Chassis Parts Categories
We carry over 77 Steering and Chassis Parts in inventory for the Jaguar XJR. If you’re looking for aftermarket Steering and Chassis Parts for your Jaguar XJR, check out all these categories:
Essential Jaguar XJR Steering and Chassis Parts
MOOG – Control Arm and Ball Joint Assembly (Part No.RK621666)
from
$197.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Cardone – Power Steering Filter (Part No.20-0058F)
from
$48.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Cardone – Power Steering Pump (Part No.21-5288)
from
$129.99
CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.
Product Features:
See More
Product Features:
- All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
- All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
- Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
- Units are supplied with 100% tested and calibrated pressure relief valves.
- Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.
Meyle – Tie Rod End (Part No.M3010945983MEY)
from
$49.48
Meyle tie rod ends meet OE specifications and help to eliminate front-end vibration, shimmy and unsafe handling. Meyle tie rod ends are manufactured to exacting OE tolerances for a proper fit and function.
Product Features:
See More
Product Features:
- Original Equipment quality
- Coated surface to prevent corrosion and rust
- Fatigue tested for structural integrity
- Precision made components for an ideal fit and function
- Adjustable for proper alignment
- Premium Polychloroprene rubber boots
Burgaflex – Sway Bar Bushing (Part No.L1050108345BUR)
from
$6.08
Sway Bar Bushing
Lemfoerder – OE Replacement Ball Joint (Part No.L202037407LEM)
from
$86.12
The ultimate in safety and quality in steering and suspension is what sets LEMFORDER apart. The expertise that Lemfoerder has acquired through ball joint development work with leading automobile manufacturers is the guarantee that increasing demands for safety and comfort will be met. The products developed for the LEMFORDER brand are optimized right through to series maturity in thorough inspections and field trials, and then subjected to the toughest conditions in special wear tests. This approach gives you safety and reliability under all conditions – as service and costs only meet the customer’s demands when high quality is implemented systematically.
Product Features:
See More
Product Features:
- OE expertise and quality
- Precision manufactured housing and components
- Corrosion protection
- Permanently attached boot
- One-piece forged housing for easier steering
Carquest Premium – Pressure Line Hose Assembly (Part No.37937)
from
$76.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature wear and tear.
Product Features:
See More
Product Features:
- Switch sockets allow re-installation of OE pressure sensors
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Heat/abrasion tubing protects vital areas
- Restrictor helps absorb vibration and reduce noise
- Movable mount bracket for easy, secure installation
- Silver heat guard protects hose in high heat areas
- Original style fittings, no adapters required
A.P.A. URO – P/S Reservoir (Part No.M2030126181APA)
from
$202.43
P/S Reservoir
Eurospares – Power Steering Return Hose (Part No.M2016103871ESP)
from
$79.55
This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering.
Product Features:
See More
Product Features:
- Manufactured as a direct OE replacement
- Pressure tested to maintain a consistent flow
- Backed by the manufactures warranty against workmanship and material defects
Cardone – Rack and Pinion Assembly (Part No.26-6006)
from
$674.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Rare Parts – Sway Bar Link (Part No.RP19713)
from
$83.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Lemfoerder – Toe Adjustment Link (Part No.L2066945362LEM)
from
$134.73
The Lemfoerder toe adjustment link is manufactured and designed to meet the OE specifications for quality, fit and performance.
Product Features:
See More
Product Features:
- OE Direct replacement
- Bushings included for a complete installation
- Corrosion-resistant for long-lasting performance
Powercraft – Pump Seal Kit (Part No.8834)
from
$65.99
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Eurospare – Fuel Filter O-Ring (Part No.E1015121405ESP)
from
$4.00
Fuel Filter O-Ring
National – Bearings (Part No.HM89410)
from
$11.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Crowned raceways and rollers to ensure even load distribution for maximum life
- Industry leading coverage
- Professional technicians know they can depend on National
Driveworks – Tapered Roller Bearing (Part No.S-HM-89410)
Lemfoerder – Lemfoerder Steering Rack Boot (Part No.M1010156590LEM)
from
$14.26
The Lemfoerder Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
EMPI – re Steering Rack Boot (Part No.M1010156588EMP)
from
$17.38
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Burgaflex – P/S Reservoir Line H (Part No.M2033278142BUR)
from
$13.14
Burgaflex is a market leader in the field of industrial hydraulics, air conditioning, and aerospace hose and fitting.
Product Features:
See More
Product Features:
- Manufactured as a direct OE replacement
- Pressure tested to maintain a consistent flow
MTC – Subframe Bushing (Part No.L102052585MTC)
from
$13.27
The MTC subframe bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Eurospares – Subframe Bushing (Part No.L1020108718ESP)
from
$13.54
The Eurospare subframe bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
APA/URO Parts – Subframe Bushing (Part No.L1020111567APA)
from
$53.91
The APA/URO subframe bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
MOOG – Stabilizer Bar Bushing Kit (Part No.K201807)
from
$10.29
Backed by superior materials and rigorous testing, MOOG sway bar bushings deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS — Made from high-quality natural rubber material for durability and ride performance
- EXTENDED SERVICE LIFE — Less prone to splitting, discoloring or cracking with age for long life
- HIGHLY PRECISE ENGINEERING — Optimized for quiet operation and resistance to wear, salt, road grime and oils
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
Jaguar XJR Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Jaguar XJR
You love your XJR. So we’ve made it easier than ever to help you find Jaguar XJR Steering and Chassis Parts in our online catalog. Our inventory holds 77 aftermarket and OEM Steering and Chassis Parts for your Jaguar XJR, ranging from $4.00 to $788.08.
We offer parts from 24 brands trusted to make quality Steering and Chassis Parts for your Jaguar XJR. Before you buy, take some time to read through customer reviews. We currently have 1,508 reviews of Jaguar XJR Steering and Chassis Parts from previous customers.
Find your XJR Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Jaguar XJR part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Jaguar XJR
Our inventory holds Steering and Chassis Parts for your Jaguar XJR from 24 trusted brands. You’ll find OEM and aftermarket parts from brands like Cardone, Driveworks, and Moog, all of which can keep that Jaguar happy.
We have MOOG parts available for your Jaguar XJR in categories like Sway Bars and Tie Rods. Some of the top-rated MOOG parts in these categories are:
Top-Rated Cardone Steering and Chassis Parts
Leading Cardone Steering and Chassis Parts
We carry Cardone brand parts for your Jaguar XJR across several catalog categories, including Power Steering Parts. Some of our most reviewed Cardone parts include:
FAQs for Jaguar XJR Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Jaguar XJR?
Out of 77 Steering and Chassis Parts for the Jaguar XJR, the most popular in our inventory are:
