from

$146.99

Premium-quality remanufactured power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Every Unit is fully disassembled, cleaned, and inspected which ensures that defects are identified and corrected to allow for an extended service life
All shafts and internal surfaces are examined, reconditioned, and polished which prevents premature failure of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life of the power steering pump
All assembled units are 100% end-of-line tested for leaks, noise, and performance to ensure that the product has the same functionality as intended by the OE

from

$166.99

Premium-quality remanufactured power steering pump designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Every Unit is fully disassembled, cleaned, and inspected which ensures that defects are identified and corrected to allow for an extended service life
All shafts and internal surfaces are examined, reconditioned, and polished which prevents premature failure of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life of the power steering pump
All assembled units are 100% end-of-line tested for leaks, noise, and performance to ensure that the product has the same functionality as intended by the OE

from

$20.99

Anti-vibration parts dampen vibration harmonics from the engine and drive line components to rest of the vehicle. This in turn reduces vibration and noise which can be felt and heard while the vehicle is in operation. Rein Automotive anti-vibration parts are application specific and match the design and function of the OE parts

Product Features:

Rubber components match the shore hardness of the original equipment bushing to ensure maximum performance and product longevity
Manufactured to strict engineering standards/specifications in materials and tolerances
Recommend to replace bushings in pairs to ensure best performance. Note: Sway Bar Bushing Kits contain the needed pair

from

$11.99

Boot kits protect a joint in the car that would be destroyed by dirt, sand and other particles if left exposed, even under normal conditions so it’s important that they be properly maintained and in good condition. Rein Automotive provides application specific power steering boot kits that come guaranteed to fit the first time.

Product Features:

Comes with all the needed hardware for the complete repair; clamps, washers, clips, etc.
Boot manufactured with highest quality materials to prevent cracking, wear and leaking
Matches original equipment design specifications

from

$406.99

Premium-quality remanufactured power steering rack & pinion designed for dependability and reliability throughout the service life of the vehicle.

Product Features:

Components are inspected and tested for straightness and structural integrity which eliminates critical component failure
Rack shafts and housings are thoroughly inspected, cleaned, and painted which prevents corrosion and rust
Sealing surfaces are polished, restored and checked for smoothness which helps to ensure that there will be no leaks for the extended service life of the unit
All serviceable components are replaced with 100% new OE equivalent parts for reliability throughout the service life
All assembled units are 100% end-of-line tested for leaks and performance to ensure that the product has the same functionality as intended by the OE

from

$35.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$47.49

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element
Patented built-in bypass that filters up to 190 micron particles
Designed to extend the life of the steering system
Sure-grip barb connections are included to ensure proper hose fitment

from

$40.99

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$32.99

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

In-line filter with serviceable filter element.
Patented built-in bypass that filters up to 190 micron particles.
Designed to extend the life of the steering system.
Sure-grip barb connections are included to ensure proper hose fitment.

from

$91.99

Durable power steering filter designed to remove harmful particles and contaminates form fluid to prevent premature steering system failure.

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to captures metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8¿ and 1/2¿ to allow for installation into small areas at various angles, fitting all makes and models
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models
Leak free, high impact, environmentally resistant polymer casing to ensure longer life and better resistance to high underhood temperatures

from

$13.99

Product Features:

Contains a powerful magnet which removes 99% of contaminants at filter entry point
Supplied with a built-in fluid safety bypass to ensures power steering continues to operate in event of filter overload
Contains a secondary membrane filter to capture metal materials that may contaminate the power steering system
Compact design available in standard sizes 3/8┐ and 1/2┐ to allow for installation into small areas at various angles, fitting all makes and models

from

$134.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$50.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$139.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$50.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Improves upon OE designs
Quiet, dependable operation
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants

from

$114.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$119.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Thermoplastic material
No Squeak
Restores vehicle handling
Improves body roll

from

$333.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$148.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$141.99

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$378.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$386.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$142.99

Product Features:

EASY TO INSTALL – Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
HIGHLY PRECISE ENGINEERING – Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
COMPREHENSIVE COVERAGE – Available for foreign and domestic nameplates
INSTALLATION READY – Pre-installed ball joints with sealed sockets for maintenance-free operation
LONG LIFE – Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
ENHANCED STRUCTURAL STRENGTH – Heat treated to match or exceed OE requirements to inhibit premature failure
ADDED CORROSION PROTECTION – Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration

from

$478.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance

from

$155.99

This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.

Product Features:

Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
Durably designed – additional coatings offer long-lasting rust and corrosion resistance