Isuzu I-370 Brake Parts

CARDONE Remanufactured Power Brake Boosters are re-engineered, built and tested to match O.E. performance. Original designs are scrutinized for potential improvement and, where applicable, design upgrades are implemented to produce a more durable part than the original. All units are 100% tested to ensure perfect fit and function.

Product Features:

• 100% O.E. quality seals, diaphragms and check valves are installed on every unit for like-new performance and reliability.
• Exclusive rust-prohibitive finishing process extends unit life.
• Master cylinder output rods are pre-adjusted (when included) for easier and faster installation.
• All units are 100% tested to ensure reliable performance.
• Guaranteed fit and function.

A wheel drum hardware kit with adjuster and adjuster springs. Replace worn self-adjusting levers and frozen adjusting screws for proper drum brake self-adjustments.

Cylinder casting is constructed from high-quality cast iron or aluminum for long-lasting durability

Product Features:

• All rubber parts are of high-quality EPDM compound for resistance to DOT3 or DOT4 brake fluid
• Key components like spring are from high and stable quality suppliers.
• Products are machined by CNC machines with strictly quality control.
• Parts assembled in a clean environment and all parts were thoroughly cleaned before assembly.
• Manufactured to strict engineering quality standards, meets S.A.E. specifications
• Each product is 100% tested on production lines and sampling tested prior to shipment
• Key working procedure used CNC, positioning accuracy ± 0.005/300 mm, repeat positioning accuracy + /-0.042 mm
• Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing
• Main cylinder hole of measured by the 0.038 mm distinguish precision pneumatic instruments, surface roughness instrument and endoscope testing

Brakes are designed as a system and all the parts need to work together for best performance. The kits provide advance protection for your brake by assuring brakes perform at an optimum level.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Exact fitment and original replacement
• Helps deliver a quieter, more efficient braking system
• Low-friction PTFE coating to reduce drag
• Manufactured with quality materials to suppress high stress levels

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Our Z36 Truck & Tow Brake Drum Upgrade Kit is recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. This brake pad, rotor and drum kit comes with everything you need, including all the necessary hardware, for an easy, bolt-on installation. The low-dust Ceramic brake pads are reinforced with Carbon-Fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Drilled & Slotted rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. The Evolution premium coated brake drums come with brake shoes, a spring/hold-down kit and adjusters. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, get the easy and affordable, bolt-on performance upgrade with the Z36 Truck & Tow Brake Drum Upgrade Kit.

Product Features:

• This complete front and rear kit includes front drilled & slotted rotors with Z36 brake pads along with silver painted rear drums with brake shoes and hold down hardware.
• Proprietary Carbon-Fiber Ceramic Z36 brake pads enhance the strength of a typical ceramic brake pad compound to handle heavier loads
• Drilled & Slotted performance rotors provide maximum cooling
• Premium drums are coated in a silver rust preventative paint that is oven cured so it keeps looking good despite high temperatures
• Premium shoes are made from 100% new steel, plus are cam ground and chamfered to ensure precise fit and noise-free operation
• Comes with everything you need to get the job done, including stainless-steel pad installation hardware, shoe installation hardware, adjuster kits and high-temperature ceramic brake lubricant
• Brand new shoe hold-down hardware ensures that you don’t have to deal with the old worn out/broken springs, pins or cups.
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Buy with confidence from the originator & industry leader of brake kits

Wagner® QuickStop® brake shoes utilize professional-grade friction materials that mirror original equipment and utilize OE-required riveted or bonded configurations.

Product Features:

• Precision ground maximizes friction-to-drum contact
• Attached levers and pins included to match OE (on specific applications)
• Comprehensive coverage for foreign and domestic nameplates
• Install Wagner with total confidence

The ACDelco GM Original Equipment Power Brake Booster Check Valve functions as a one-way valve that ensures air does not enter the vacuum booster when the engine is turned off or if there is a leak in the vacuum hose, and is a GM-recommended replacement for your vehicle’s original components. This power brake booster check valve has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured with GM Original Equipment specification for fit, form, and function

The Power Stop Z16 Evolution ceramic brake pads feature a ceramic formula designed to maximize stopping power while reducing brake dust & eliminating noise. Using OE positive mold technology along with a thermal scorched pad surface, Z16 pads maintain consistent wear and performance while ensuring a fast break-in. The Z16 Evolution ceramic brake pads are an affordable stock replacement for all vehicles.

Product Features:

• Low-dust ceramic formula designed to maximize stopping power and keep wheels clean
• Positive mold technology for consistent wear and performance
• Thermal scorched pad surface for a fast break-in
• Chamfered and slotted to ensure noise-free braking
• Powder coated backing plate resists rust and corrosion to provide extended pad life
• Multi-Layer rubberized shims provide virtually noise-free braking

Using advanced re-engineering materials and processes, our master cylinders match O.E. performance and fitment. New O.E.-quality seals and cups are installed on each unit, ensuring leak-free, long-lasting performance. Cast-iron master cylinders.

Product Features:

• Only new O.E.-quality seals and cups are used in the remanufacturing process to ensure O.E. performance and reliability. All rubber components meet S.A.E. specifications.
• Bleeding kits are supplied with the unit to make the bleeding process faster and easier (where applicable).
• Bores meet critical micro-finish specifications to eliminate pitting and corrosion, a cause of premature failure.
• Cast-iron master cylinders feature a premium protective coating to minimize rust and extend unit life.
• Piston assemblies are height-gauged to ensure the master cylinder equals the O.E. unit performance.
• Plastic reservoirs are vacuum-tested to ensure they are leak free.

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. A complete brake job that includes new hardware goes a long way toward preventing comebacks. Changing out your Rubber Pin Boot or Slider Bushing Kit will ensure the guide pins are clean and free from debris for smoother braking.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Maintains proper movement for safe, effective stopping performance
• Prevents noise and premature wear

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Carquest Premium Coated Caliper Brackets are engineered and manufactured to meet or exceed OEM performance specifications for strength and durability. Complete inspection of all critical dimensions and bolt threads for a perfect fit and easy installation. OE style rust protective coatings ensure worry-free performance for miles top come.

Product Features:

• Meets or exceeds OE performance specifications
• Application-specific brackets for perfect fit and easy installation
• OE style rust protection extends product life
• Grease pack is included for easy installation

Each Carquest Premium brake hose assembly is precision engineered to match the original fit and includes brackets, grommets, molded plastic guards, wire clips and protective sleeves as required to ensure that all wearable parts are restored to original condition. Carquest Premium brake hoses meet or exceed Department of Transportation (DOT), Federal Vehicle Safety Standards (FMVSS 106) and Society of Automotive Engineers (SAE J1401) standards to ensure a reliable and long-lasting repair.

Product Features:

• Brake hoses with banjo end fittings include new copper washers to ensure proper sealing
• Tensile minimum load holds up to 1800 N
• All end fittings are electroplated with eco-friendly material that delivers superior corrosion and rust resistance
• Designed based on requirements and testing of SAE J1401, resulting in high quality brake hoses
• Every brake hose is subjected to a high-pressure quality assurance test before leaving the factory, ensuring trouble-free installation and operation
• Brand may vary by location

Carquest Premium brake drums meet or exceed original equipment specifications while delivering superior stopping power. Carquest Premium drums are manufactured with proper harmonic design and balancing to help eliminate noise and vibration. Our drums are manufactured to the original dimensional specifications for proper fit and performance. Carquest Premium brake drums are designed for long-lasting and quiet braking with superior performance.

Product Features:

• Meets or exceeds OE design for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• Proper harmonic design and balance helps to reduce brake noise and vibration
• Optimal metallurgy and casting thickness to preventing warping

Product Features:

• Our units are all pre-aligned & pre-adjusted to save installation time and ensure proper switching.
• A lubricated felt pad that lubricates the cam lobes on the vehicles distributor. This reduces wear on the point set rubbing block, extending the usable life of the part.
• Ventilated where available, tungsten contacts, which run cooler and exhibit less erosion.
• The copper-alloy shunt provides superior resistance to breakage, due to the flexing of the moving arm on the point set. It also significantly increases current conductivity over typical steel, shunts.

Brakes are designed as a system and all the parts need to work together for best performance. The boot and square cut seals included in our Caliper Repair Kit, ensure that the caliper works as designed during the apply and release cycle.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Increases the life span of the brake pads
• Restores brakes to like-new performance
• Prevents noise and premature wear
• Direct replacement for a proper fit

Wearever Calipers feature steel pistons that are less likely to crack or deform under extreme pressure. Expertly remanufactured to rigorous quality and performance standards, they are are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. These remanufactured brake calipers are 100% pressure-tested to deliver consistent, industry-leading brake performance. Each unit arrives with a complete set of brand-new hardware for a simple, complete installation. Caliper bracket is included when applicable.

Product Features:

• Steel pistons are durable, not prone to cracking and handle great loads.
• Rubber seals are replaced with new high temperature EPDM rubber for extended life and optimum performance.
• Mounting bracket is included where applicable for a hassle-free installation.
• Calipers are treated with a special formulated rust inhibitor and kept in the original equipment finish.
• New banjo bolts are included where applicable to ensure a perfect fit and quick installation.
• New bleeder screws provide trouble-free bleeding and a positive seal.
• New washers are included where applicable for a proper seal.
• A plastic cap plug protects every brake port thread to ensure trouble-free installation.
• New stainless steel hardware clips and new mounting pins are included where applicable.

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit with Powder Coated Calipers comes with everything you need, from pads, rotors, calipers and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. The Powder Coated Calipers not only protect against corrosion, but also really stand out behind your wheels! Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit with Calipers.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• All calipers are powder coated, assembled, and tested in our Chicago, IL facility
• Low dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Rotors are zinc plated for maximum protection against rust.
• Buy with confidence from the originator & industry leader of brake kits
• Buy with confidence from the originator & industry leader of brake kits

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

PowerStop Performance Brake Calipers are made specifically with the enthusiast in mind. These calipers bolt directly in place of the stock calipers, and they look and perform great behind stock or custom wheels. PowerStop calipers and the brackets are remanufactured in our Chicago, IL facility and treated with a electrostatic high-temperature red powder-coating. The easy to clean powder coating helps to resist rust and corrosion thus extending the life of your calipers. PowerStop calipers are 100% pressure tested to verify piston operation and prevent any possible leaks from occurring. This insures that every caliper is inspected for quality and safety. PowerStop caliper pairs are expertly assembled using new seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets. High temperature EPDM rubber dust boots and premium silicone lubricant is used for a smoother operation and an extended life in extreme conditions. The performance color is a nice touch that really stands out behind your wheels!

Product Features:

• All calipers are thoroughly inspected for quality and safety. Pressure tested to prevent leaks.
• New seals, caliper guide pins, dust boots, bleeder screws, stainless steel brake pad abutment clips and mounting brackets
• High temperature EPDM rubber for extended life.
• Premium silicone lubrication provides smoother operation.
• The easy to clean powder coating helps to resist rust and corrosion and extends the life of calipers.

PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes – no matter where or how they use their vehicle. Forget standard, off-the-shelf parts. Our Z23 Evolution Sport Brake Upgrade Kit comes with everything you need, from pads, rotors and premium stainless-steel hardware for an easy, bolt-on upgrade for your daily-driver. Along with increased braking power, the Carbon-Fiber Ceramic brake pads feature a low-dust formula to keep those wheels looking great while you say goodbye to nasty brake dust. These pads combine with Drilled & Slotted rotors to ensure a cool, smooth ride that protects against rust and corrosion. Give your daily-driver the easy and affordable performance upgrade it deserves with the Z23 Evolution Sport Brake Upgrade Kit.

Product Features:

• This complete upgrade kit is engineered to improve the braking performance of the vehicle you use everyday
• PowerStop engineered Carbon-Fiber Ceramic Z23 compound significantly enhances braking performance versus traditional ceramic brake pads
• Low-dust braking validated through on-vehicle 3rd party tests in Los Angeles, showing on average 30% less dust versus OE
• Multi-Layer rubberized shims provide virtually noise-free braking
• Drilled & Slotted performance rotors provide maximum cooling
• Includes stainless-steel installation hardware and high-temperature ceramic brake lubricant
• Bolt-on upgrade for stock brakes, no modifications necessary
• Brake rotor, pad & hardware engineered to work together to increase stopping power, improve durability & eliminate dust
• Rotors are zinc plated for maximum protection against rust.
• Buy with confidence from the originator & industry leader of brake kits
• Buy with confidence from the originator & industry leader of brake kits

Brakes are designed as a system and all the parts need to work together for best performance. Industry brake service experts agree – when brake friction materials are ready to be replaced, the hardware is too. Caliper Guide Pins are important to replace because they hold the brake piston in place to create effective stopping performance.

Product Features:

• This part matches Original Equipment (OE) quality specifications
• Easy and fast replacement
• Ensures the brake pads are meeting the rotors at the correct angle for an even braking system
• Corrosion resistant coating for long-lasting durability against harsh roads
• Manufactured with quality materials to suppress high stress levels

WBR Run True Technology Metallurgic-Gray (MG) Finished Rotors All World Brake Resources (WBR) brake rotors with Run-True technology are manufactured to match the exact OE fit, OE construction, and precision finishing to ensure quick and easy installation, as well as trouble-free functionality for the life of the rotor. The Metallurgic-Gray coating is applied to all outward non-friction surfaces including in the gap between the plates covering the cooling vanes and cured through an oven drying process. The Gray coating provides an effective anti-rust protection to help maintain a clean appearance. The coating used for WBR is also similar to the OE color used by many OE car makes. WBR Brake Rotors with Run-True Technology have ultra tight tolerances that provide the finest braking experience, from break in throughout the life of the rotor, reducing the chance of warping even under extreme braking temperatures. The coated brake disc provides a protective water based coating that prevents rust and corrosion, extended rotor life and improved visual appearance. WBR Brake Rotors are manufactured to meet or exceed the original equipment manufacturer specification for durability, fit, and function.

Product Features:

• High metallurgical and machining standard to improve stopping distances
• Produced to match OE design fitment – G 3000 gray iron
• Mill balanced
• TS16949 certified
• Non-directional finish provides smooth vibration free performance
• No need for machining prior to installation
• Durable Metallurgic-Gray finish to all outward non-friction surfaces
• Metallurgic-Gray anti-rust protection to help maintain a clean appearance
• Compatible with NAO, Ceramic and Semi-Met pad compounds for reduced noise
• Designed to minimize brake fade and extend pad and rotor life
• 24/24 Warranty – limited warranty against defects in material and workmanship Technical Service Bulletins

Carquest Professional coated rotors are built to meet or exceed original equipment specifications delivering superior stopping power. Carquest Professional coated rotors have a specially engineered coating that penetrates vanes and prevents rust, corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increase the life of your pads and rotors. These rotors are built for quiet, long-lasting performance.

Product Features:

• corrosion and build up. This zinc and aluminum coating maintains a like-new appearance significantly longer than a standard rotor. Carquest Professional coated rotors are designed to effectively dissipate heat helping to eliminate brake fade and increas
• long-lasting performance.
• Manufactured to exacting quality and dimensional specifications for superior stopping power
• Exceeds ISO manufacturing guidelines (International Organization for Standardization)
• OE configuration to dissipate heat, increasing pad life
• Proper harmonic design helps to reduce brake noise
• Non-directional finish for decreased break-in time and reduced brake noise
• Brand may vary by location