International 4900 Suspension Parts

Top International 4900 Suspension Parts Categories

We carry over 8 Suspension Parts in inventory for the International 4900. If you’re looking for aftermarket Suspension Parts for your International 4900, check out all these categories:

Essential International 4900 Suspension Parts

Bulldog HD – Heavy-Duty Shock Absorber – 1990-2003 International 4900 (Part No.HD1215-0052)

Heavy-Duty Shock Absorber - 1990-2003 International 4900

from

$83.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.

Product Features:
  • Robotic 360 Degree Welds; Highest Weld Strength in the Industry
  • Propriety Value Design for long lasting compression and rebound performance
  • Brushing rubber formulation with lowest levels of filler
  • OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
  • Double lip seal design to reduce excessive misting and extend damping life cycle
See More
View Product

Monroe – Magnum Shock Absorber (Part No.65107)

Magnum Shock Absorber

from

$119.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
  • 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • Single-lip, low-friction oil seal
See More
View Product

Monroe – Magnum Shock Absorber (Part No.65109)

Magnum Shock Absorber

from

$128.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
  • 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • Single-lip, low-friction oil seal
See More
View Product

Bulldog HD – Heavy-Duty Shock Absorber – 2003-2016 IC Corporation RE School Bus (Part No.HD1214-0545)

Heavy-Duty Shock Absorber - 2003-2016 IC Corporation RE School Bus

from

$50.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.

Product Features:
  • Robotic 360 Degree Welds; Highest Weld Strength in the Industry
  • Propriety Value Design for long lasting compression and rebound performance
  • Brushing rubber formulation with lowest levels of filler
  • OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
  • Double lip seal design to reduce excessive misting and extend damping life cycle
See More
View Product

Bulldog HD – Heavy-Duty Shock Absorber – 1990-1994 International 4000 (Part No.HD1215-0114)

Heavy-Duty Shock Absorber - 1990-1994 International 4000

from

$89.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.

Product Features:
  • Robotic 360 Degree Welds; Highest Weld Strength in the Industry
  • Propriety Value Design for long lasting compression and rebound performance
  • Brushing rubber formulation with lowest levels of filler
  • OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
  • Double lip seal design to reduce excessive misting and extend damping life cycle
See More
View Product

Bulldog HD – Heavy-Duty Shock Absorber – 1987-1992 International 1452SC (Part No.HD1215-0028)

Heavy-Duty Shock Absorber - 1987-1992 International 1452SC

from

$79.99
Bulldog HD commercial Heavy Duty shock absorbers are designed with the best materials and innovative design techniques for lasting quality and performance! Best Technology. Best Performance. Ultra Premium HD Shocks.

Product Features:
  • Robotic 360 Degree Welds; Highest Weld Strength in the Industry
  • Propriety Value Design for long lasting compression and rebound performance
  • Brushing rubber formulation with lowest levels of filler
  • OE Enos Synthetic to perform from -40 Deg. F to 340 Deg. F
  • Double lip seal design to reduce excessive misting and extend damping life cycle
See More
View Product

Monroe – Magnum Shock Absorber (Part No.65409)

Magnum Shock Absorber

from

$123.99
The Monroe® Magnum shock absorber for Class 6-8 Vehicles is the first gas-charged, large-bore shock specifically designed for air spring and taper leaf suspensions. Its nitrogen gas charge provides the fast response essential for today’s heavy truck suspe

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – when required
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld to provide up to 15,000 lbs. (6,804 kg) tensile strength for maximum durability – when required
  • 2-3/8 inch (60.3 mm) reserve tube More fluid for more consistent performance – on most applications
  • 1-3/4-inch (44.6 mm) bore Large bore than most shocks to provide more consistent control
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
  • 10-stage valving: Reacts to wide range of driving conditions – on most applications
  • All weather fluid: Contains special modifiers to reduce frictions and ensure smooth rod reaction
  • Single-lip, low-friction oil seal
See More
View Product

Monroe – Magnum Shock Absorber (Part No.66923)

Magnum Shock Absorber

from

$77.99
The Monroe® Magnum shock absorber for class 3-6 Vehicles is gas-charged for quicker response and a stable, more comfortable ride. Replacing worn-out units with hard-working Magnum shocks can help reduce excessive vibration. The result can be better tire l

Product Features:
  • Robust hydraulic lock-out Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly – on most applications
  • PTFE coated bearing Reduces friction during operation between the rod and rod guide, improving durability – on most applications
  • Tenneco shouldered bushings Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability – on most applications
  • Nitrogen gas-charged For improved ride and handling, helps maintain tire to road contact by reducing aeration – on most applications
  • Loop welding technique Resistance weld with additional 360-degree weld provide up to 13,100 lbs. (6,395 kg) tensile strength for maximum durability – when required
  • 2-inch (50.8 mm) or 2-1/4-inch (57.2 mm) reserve tube More fluid for more consistent performance – when required
  • 1-3/8-inch (35 mm) bore Larger bore than most shocks to provide more efficient and consistent control – on most applications
  • .05-inch Pressure tube withstanding pressure of 9KPSI
  • 10-stage valving Reacts to wide range of driving conditions – on most applications
See More
View Product

Helping You Find the Right Suspension Parts for Your International 4900

You love your 4900. So we’ve made it easier than ever to help you find International 4900 Suspension Parts in our online catalog. Our inventory holds 8 aftermarket and OEM Suspension Parts for your International 4900, ranging from $50.99 to $128.99.

We offer parts from 2 brands trusted to make quality Suspension Parts for your International 4900.

Find your 4900 Suspension Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your International 4900 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Suspension Parts Brands for Your International 4900

Our inventory holds Suspension Parts for your International 4900 from 2 trusted brands. You’ll find OEM and aftermarket parts from brands like Monroe and Bulldog HD, all of which can keep that International happy.