International 4800 Fuel and Emissions Systems

Injection control pressure determines fuel injection quantity under varying engine operating conditions. Improper injection quantity can result in poor engine performance or a no-start condition. New IPR valve is manufactured to meet or exceed original equipment performance specifications to ensure precise control of injection oil pressure.

Product Features:

• Original equipment fit, form and function
• Manufactured to precise OE performance specifications

This diesel primer pump is designed to match the fit and function of the original pump on specified applications, and is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this diesel primer pump is designed to match the fit and function of the original pump on specified applications
• Restores functionality – reliable replacement for an original pump that has failed, causing hard or no-start conditions
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
• Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Modern fuel injection systems require fuel be free of both particulate and water contamination. Carquest spin-on fuel filters keep fuel clean and engines running at maximum efficiency.

Product Features:

• Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
• Made in USA
• CAUTION: Furnished D-Ring must be installed on post for seal.

This EGR valve is designed to match the fit and function of the original valve on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this EGR valve is designed to match the fit and function of the original valve on specified vehicles
• Ideal solution – this valve is engineered to withstand extreme heat and carbon buildup, and is a reliable replacement for a failed original EGR valve
• Durable construction – made from quality components to ensure reliable performance and long service life
• Quality assured – backed by a team of product engineers based in the United States

The Premium CarQuest® Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The injection control pressure (ICP) sensor monitors and relays the oil pressure inside the high pressure oil rails to on-board computers, helping to ensure smooth and proper fuel injector actuation and operation. Properly pressurized oil delivery is critical to the hydraulically activated electronically assisted unit injector (HEUI) fuel injection system, and when this system fails to operate properly the on-board computers may throw a code and illuminate a check engine light. A failing or improperly functioning injection control pressure sensor will provide erratic or inaccurate readings to on-board computers, severely affecting fuel injection performance and system function. Tell-tale signs of failing or failed injection control pressure sensor are rough idle and operation, power loss and the inability to start the vehicle in more severe cases.

Product Features:

• The Premium CarQuest® Vehicle Solutions line of ICP sensors offer an extremely robust design, manufactured on OE production lines. The ICP sensor kit includes all necessary components for a professional installation.
• Designed and manufactured with highest quality materials, industry leading electronic components and strict quality controls. Engineered to exceed OE performance and to meet the uncompromising demands of service professionals.
• Direct fit replacement matches proper OE fit, form, and function and ensures trouble free installation of your injection control pressure sensor.
• Upgraded materials compared to OE, including stainless steel housings and upgraded thermoplastics for superior corrosion resistance and high temperature performance.
• Hermetically sealed, robotically laser-welded stainless steel housing creates a burst proof structure and superior environmental sealing protection from the elements.
• All units are 100% helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
• All units are 100% tested using automated end-of-line testing equipment that pressurizes the sensor and checks full-spectrum functionality and electrical output to ensure each sensor meets manufacturing specifications before packaging.

This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness connector pigtail ensures proper electrical signals are supplied to the injectors and glow plugs.

Product Features:

• Harness connects between valve cover gasket connector and fuel injectors and glow plugs
• Two required per side

CARQUEST premium remanufactured high-pressure oil pumps are completely torn down, ultrasonically cleaned, inspected and remanufactured using premium components. Each pump is 100% tested on a sophisticated flow bench under multiple operating parameters to meet or exceed OE specifications.

Product Features:

• Each unit is 100% tested to OE specifications
• Includes pump gasket

Qualities that have made SMP an industry leader for more than 95 years, innovation, engineering expertise, superior quality, meticulous testing, unmatched customer service, competitive pricing, and brand integrity, are at the heart of every TechSmart part.

Product Features:

• Direct fit replacement provides proper fit, form, and function
• Quality-engineered replacement for faulty OE part, which can fail from improper installation and wear-and-tear from carbon buildup
• Constructed from reinforced brass to seal and protect immediate area of injector bore within cylinder head
• All TechSmart® parts meet or exceed OE performance, providing today’s technician with the quality parts needed to get the job done right, the first time

This repair solution allows for the replacement of broken, melted or damaged connector plugs, which can cause intermittent connections, resulting in engine misfire and hard-starting. New harness connector pigtail ensures proper electrical signals are supplied to the injectors and glow plugs.

Product Features:

• Valve cover gasket connector pigtail connects between engine harness and valve cover gasket
• Two required per side

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• State-of-the-art designs that meet or exceed OE specifications
• Top-of-the-line quality and performance
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:

• Premium quality materials for longer service life
• Sealed connections (where applicable) to prevent environmental corrosion and performance issues
• Global coverage for import and/or domestic applications
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
• Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

A critical component in the fuel injection system, the ICP sensor supplies the powertrain control module with injection control pressure, which is used to control injection quantity. Failure can result in poor drivability and/or illumination of the engine malfunction indicator or check engine lamp. New precision sensor is designed to meet or exceed OE performance specifications.

Product Features:

• Original equipment fit, form and function
• Meets or exceeds OE performance specifications
• Premium materials ensure trouble-free operation

This EGR gasket set is designed to match the fit and function of the original gaskets required to repair and restore proper function to EGR system on specified vehicles, and is engineered for durability.

Product Features:

• Direct replacement – this EGR gasket set is designed to match the fit and function of the original gaskets required to repair and restore proper function to EGR system on specified vehicles
• Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gaskets fail
• Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Protects your fuel from theft and vandalism
• Manufactured from durable, long-life materials
• Independently tested for emission control
• Passes all state and federal emissions tests
• Reduces air pollution with proper sealing and venting

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

• Passes all state and federal emissions tests
• Manufactured from durable, long-life materials
• Reduces air pollution with proper sealing and venting
• Independently tested for emission control

Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:

• Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
• Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
• Durable construction – manufactured from quality materials for superior service and reliability
• Trustworthy design – backed by 100 years of automotive aftermarket experience

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• State-of-the-art designs that meet or exceed OE specifications
• Top-of-the-line quality and performance
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
• BWD is a global manufacturer of original equipment and aftermarket fuel injection products, complete quality control is maintained through the manufacturing process from componentry to finished product

Complete injector seal kit includes the seven components necessary to properly reseal injector when installed. All parts in kit are manufactured using premium OE quality materials.

Product Features:

• Includes pink and blue high-pressure oil seals, black square oil seal, steel back-up ring and orange fuel seal
• Includes both copper and stainless-steel combustion seal
• Premium OE quality materials
• Services one injector
• Includes technical bulletin and installation tips

Complete injector seal kit includes all six components necessary to properly reseal injector when reinstalled. All parts in kit are manufactured using premium OE quality materials.

Product Features:

• Includes pink and blue high-pressure oil seals, black square oil seal, steel back-up ring, orange fuel seal and copper combustion seal
• Premium OE quality materials
• Services one injector