International 4300LP Fuel and Emissions Systems

Essential International 4300LP Fuel and Emissions Systems

Carquest Premium – AC Pressure Sensor (Part No.ECC1113)

AC Pressure Sensor

from

$65.99
The Premium CarQuest Vehicle Solutions line of vehicle electronics are designed for OE form, fit and function for both import and domestic vehicles. The A/C Pressure Sensor reports system pressures to the on-board computer, in turn allowing the computer to properly and efficiently control the compressor, fans and system levels. An improperly functioning A/C Pressure Sensor will provide erratic or inaccurate readings to on-board computers severely affecting system performance and function. Without reliable and accurate data from a properly functioning A/C Pressure Sensor, on-board computers are unable to protect the safety of critical components and the system as a whole which can lead to excessive wear and tear on critical components and costly system damage.

Product Features:
  • Made to OE spec to ensure a proper fit, form and function.
  • Sensors are engineered for precision performance, durability and a long service life.
  • All units are helium leak tested on fully automated mass spectrometer equipment before end-of-line testing.
  • All units are tested using automated end-of-line testing equipment pressurizing the A/C Pressure Sensor and checks full-spectrum functionality and electrical output to ensure each A/C Pressure Sensor meets manufacturing specifications before packaging.
See More

Carquest Premium – EGR Temperature Sensor (Part No.AC20622)

EGR Temperature Sensor

from

$48.99
Product Features:
  • Original equipment fit, form and function
  • Direct OE replacement
See More

Carquest Premium – Remanufactured Fuel Injector (Part No.AD85141)

Remanufactured Fuel Injector

from

$512.99
Product Features:
  • Each unit is 100% tested to OE specifications
  • Includes all new premium quality o-rings and seals
  • Includes application specific technical bulletin which highlights critical aspects of the job and offers technical tips for proper installation
See More

Dorman – HD Solutions – Manifold Absolute Pressure Sensor (Part No.904-7525)

Manifold Absolute Pressure Sensor

from

$71.99
This manifold absolute pressure sensor is designed to match the function of an original sensor on specified vehicles, and to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage.

Product Features:
  • Direct replacement – this manifold absolute pressure sensor is designed to match the fit and function of the original sensor on specified vehicles
  • Ideal solution – engineered to help accurately monitor manifold pressure when an original sensor has failed from heat or internal component damage
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – HD Solutions – Fuel Tank Strap (Part No.578-5102)

Fuel Tank Strap

from

$131.99
Recommended for replacement whenever the fuel tank is replaced or serviced, this strap is a direct replacement for the original. Manufactured from durable materials to withstand harsh road and weather conditions.

Product Features:
  • Direct replacement – this fuel tank strap matches the fit, function and performance of the original part
  • Ideal solution – recommended for replacement when the fuel tank is serviced or replaced
  • Durable construction – manufactured from quality materials for superior service and reliability
  • Trustworthy design – backed by 100 years of automotive aftermarket experience
See More

Dorman – HD Solutions – Fuel Injector O-Ring Kit (Part No.904-8055)

Fuel Injector O-Ring Kit

from

$38.49
The components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles. They are engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged.

Product Features:
  • Direct replacements – the components in this fuel injector O-ring kit are designed to match the fit of the original O-rings on specified vehicles
  • Ideal solution – engineered to help ensure leak-free connections to the fuel injectors during service or when the rings are damaged
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – HD Solutions – Heavy Duty Fuel Level Sensor / Fuel Sender (Part No.285-5108)

Heavy Duty Fuel Level Sensor / Fuel Sender

from

$184.99
This fuel tank sending unit is designed to match the fit and function of the original unit on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this fuel tank sending unit is designed to match the fit and function of the original unit on specified applications
  • Restores functionality – reliable replacement for an original part that has failed due to internal sensor failure
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Carquest – Fuel Injection Pressure Regulator (Part No.23076)

Fuel Injection Pressure Regulator

from

$244.99
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • Designed to OE standards for ease of installation
  • Application-specific to ensure the proper fit and form
  • Precision-engineered pressure regulators for proper fuel delivery and engine performance
  • As a global manufacturer, we have complete control of the manufacturing process, from components to finished product?
See More

Dorman – Injection Pressure Regulator Seal Kit (Part No.904-232)

Injection Pressure Regulator Seal Kit

from

$33.49
This fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:
  • Direct replacement – this fuel injection pressure regulator seal is designed to match the fit and function of the original seal on specified vehicles
  • Restores functionality – this seal is made to fit and fully restore part functionality after the original seal fails
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – Multi-Purpose Harness (Part No.645-211)

Multi-Purpose Harness

from

$56.99
Make better electrical repairs and accessory installations with this pigtail connector. Designed for a clean appearance when installed, it features weatherproof terminals and a locking tab for a reliable quick disconnect electrical connection.

Product Features:
  • Professional appearance – this electrical pigtail is designed for a clean, professional look when installed
  • Convenient solution – this pigtail connector allows the circuit to be quickly disconnected for service or occasional use
  • Durable construction – this pigtail connector features weatherproof seals and a locking tab for a reliable connection
  • Versatile component – this connector can be used in a variety of repairs and custom installations
See More

Dorman – HD Solutions – Injector Wiring Harness (Part No.904-478)

Injector Wiring Harness

from

$225.99
This replacement fuel injector harness matches the fit and function of the original equipment part to restore proper operation of the injection system. Made of quality materials, it features full insulated electrical connectors to prevent corrosion.

Product Features:
  • Ideal replacement – this fuel injector harness matches the original equipment part on specified vehicle years, makes and models
  • Durable construction – this harness includes fully insulated electrical connectors to prevent corrosion
  • Plug and play installation – made with factory-style connectors for quick, reliable installation
  • Quality tested – this part has undergone try-on, corrosion and material testing to ensure a quality fit and long service life
See More

Carquest Premium – Truck Locking Fuel Cap (Part No.10423)

Truck Locking Fuel Cap

from

$118.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:
  • Protects your fuel from theft and vandalism
  • Manufactured from durable, long-life materials
  • Independently tested for emission control
  • Passes all state and federal emissions tests
  • Reduces air pollution with proper sealing and venting
See More

Carquest Premium – Fuel Injector Sleeve (Part No.AC20452)

Fuel Injector Sleeve

from

$9.49
Product Features:
  • Original equipment fit, form and function
See More

Dorman – HD Solutions – Diesel Particulate Filter Gasket (Part No.674-9006)

Diesel Particulate Filter Gasket

from

$21.49
When the diesel particulate filter (DPF) is failed or damaged, service it thoroughly by installing this direct replacement gasket. Made of durable materials for reliable service, it matches the function of the factory part and ensures a tight seal to the DPF.

Product Features:
  • Direct replacement – this diesel particulate filter (DPF) gasket matches the original gasket required to repair the DPF on specified vehicles
  • Ideal solution – this gasket is a reliable replacement for an original part that is damaged, failed or missing
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Carquest Premium – Carquest Diesel Exhaust Fluid Filter for SCR Systems (Part No.96679)

Carquest Diesel Exhaust Fluid Filter for SCR Systems

from

$101.99
Carquest Diesel Exhaust Fluid (DEF) Filters remove contaminants to ensure proper function of your vehicle’s Selective Catalytic Reduction (SCR) system.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Contains Plug and Filter Removal Tool
See More

Carquest Premium – Fuel Injector High Pressure Line Kit (Part No.AL009)

Fuel Injector High Pressure Line Kit

from

$28.49
CARQUEST premium fuel lines meet or exceed critical OE performance specifications for sealing and burst pressure. The fuel line on the Ford 6.4L Power Stroke must be replaced any time the line is removed, or when the injector is serviced. This complete kit includes the line and components necessary to reseal the injector.

Product Features:
  • Premium OE quality materials
  • Precision machined fittings with corrosion resistant plating
  • Includes injector O-ring
  • Includes stainless-steel combustion seal for injector
See More

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Valve (Part No.904-5056)

Heavy Duty Exhaust Gas Recirculation Valve

from

$778.99
This EGR valve is designed to match the fit and function of the original valve on specified vehicles. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this EGR valve is designed to match the fit and function of the original valve on specified vehicles
  • Ideal solution – this valve is engineered to withstand extreme heat and carbon buildup, and is a reliable replacement for a failed original EGR valve
  • Durable construction – made from quality components to ensure reliable performance and long service life
  • Quality assured – backed by a team of product engineers based in the United States
See More

Dorman – HD Solutions – Dpf Differential Pressure Sensor (Part No.904-7127)

Dpf Differential Pressure Sensor

from

$128.99
This DPF differential pressure sensor is designed to match the fit and function of the original part on specified makes, years and models, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this replacement exhaust gas differential pressure sensor, also known as a diesel particulate filter (DPF) sensor, is designed to match the fit and function of the original sensor on specified makes, years and models
  • Restores functionality – reliable replacement for an original sensor that has broken, burned out, corroded or otherwise stopped working
  • Durable construction – this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Cooler Kit (Part No.904-5023)

Heavy Duty Exhaust Gas Recirculation Cooler Kit

from

$2189.99
This EGR cooler has been engineered to match the fit and function of the original EGR cooler on specific vehicle years, makes and models. It has undergone rigorous testing and OEM benchmarking to ensure reliability.

Product Features:
  • Direct replacement – this EGR cooler is made to match the fit and function of the original part on specific applications
  • Rigorously tested – heat transfer testing, burst testing and vehicle try-on testing ensures fit and reliability
  • Durable construction – this part is made from quality materials to ensure reliable performance and a long service life
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – HD Solutions – DPF Exhaust Clamp (Part No.674-7000)

DPF Exhaust Clamp

from

$63.99
This diesel particulate filter (DPF) clamp is designed to match the fit and function of the original clamp on specified vehicles. It is engineered to help tightly secure the DPF filter when the original clamp is fatigued from normal use, damaged, or missing.

Product Features:
  • Direct replacement – this DPF clamp matches the fit and function of the original equipment clamp on specified vehicles
  • Ideal solution – engineered to help tightly secure the DPF filter when the original clamp is fatigued from normal use, damaged, or missing
  • Durable construction – designed and manufactured to strict specifications for reliable performance
  • Trustworthy quality – backed by a team of product experts in the United States and more than a century of automotive experience
See More

Dorman – HD Solutions – Heavy Duty Exhaust Gas Recirculation Valve Gasket Kit (Part No.904-5162)

Heavy Duty Exhaust Gas Recirculation Valve Gasket Kit

from

$73.99
This EGR gasket set is designed to match the fit and function of the original gaskets required to repair and restore proper function to EGR system on specified vehicles, and is engineered for durability.

Product Features:
  • Direct replacement – this EGR gasket set is designed to match the fit and function of the original gaskets required to repair and restore proper function to EGR system on specified vehicles
  • Restores functionality – this gasket set is made to fit and fully restore part functionality after the original gaskets fail
  • Durable construction – these parts are made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
See More

Dorman – HD Solutions – Diesel Injection Control Pressure Sensor (Part No.904-7508)

Diesel Injection Control Pressure Sensor

from

$354.99
Diesel engine idling rough, misfiring or stalling? This replacement injector control pressure sensor matches the fit and function of the original equipment sensor to ensure the control module receives accurate information for smooth running.

Product Features:
  • Direct replacement – this diesel injector control pressure (IPC) sensor matches the fit, function and performance of the original equipment sensor
  • Reliable construction – this IPC sensor is built from quality components to deliver an accurate signal to the ECM
  • Easy installation – this sensor features a factory-style electrical connector
  • Quality tested – this part has undergone try-on and material testing to ensure a quality fit and long service life
See More

Carquest Premium – Daytime Running Light Resistor Connector (Part No.PTA1501)

Daytime Running Light Resistor Connector

from

$28.49
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Sealed connections (where applicable) to prevent environmental corrosion and performance issues
  • Global coverage for import and/or domestic applications
  • OE specified wire gauge to ensure a reliable electrical connection
  • Designed to meet or exceed OE specifications in form, fit and function
See More

Carquest Premium – Fuel/Water Separator Spin-on with Open Port for Bowl (Part No.86232)

Fuel/Water Separator Spin-on with Open Port for Bowl

from

$77.99
Carquest spin-on fuel filters with open ends for bowls keep fuel clean and engines running at maximum efficiency. These filters feature a port designed to be used with the OE bowl.

Product Features:
  • Designed to meet or exceed OE filter performance levels over the entire OE recommended service interval.
  • Includes Port Thread: 3-12
See More

Dorman – Fuel Injection Control Module Repair Kit – No Flash Required (Part No.904-229)

Fuel Injection Control Module Repair Kit - No Flash Required

from

$209.99
This fuel injector control module is designed to match the fit and function of the original module on specified applications, and is engineered for reliable performance and durability.

Product Features:
  • Direct replacement – this FICM inverter board replaces the original board on certain Ford and Navistar vehicles to restore operation when the original unit fails from excessive heat and vibration
  • Cost-saving solution – when FICMs fail, it’s often only the power board, not the controller board and housing that make up the entire module; save money by just replacing broken board
  • No programming required – if you replace the entire module, you need to reinitialize it using professional tools, but not if you replace only the inverter board with this repair kit
  • Improved design – since the factory board fails from excessive heat and vibration, this unit features additional securing compound to help prevent it from failing the same way again in the future
See More

Helping You Find the Right Fuel and Emissions Systems for Your International 4300LP

You love your 4300LP. So we’ve made it easier than ever to help you find International 4300LP Fuel and Emissions Systems in our online catalog. Our inventory holds 64 aftermarket and OEM Fuel and Emissions Systems for your International 4300LP, ranging from $9.49 to $3,201.99.

We offer parts from 5 brands trusted to make quality Fuel and Emissions Systems for your International 4300LP. Before you buy, take some time to read through customer reviews. We currently have 104 reviews of International 4300LP Fuel and Emissions Systems from previous customers.

Find your 4300LP Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your International 4300LP part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Fuel and Emissions Systems Brands for Your International 4300LP

Our inventory holds Fuel and Emissions Systems for your International 4300LP from 5 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Carquest, and Dorman, all of which can keep that International happy.

FAQs for International 4300LP Fuel and Emissions Systems

What are the most purchased Fuel and Emissions Systems for the International 4300LP?

Out of 64 Fuel and Emissions Systems for the International 4300LP, the most popular in our inventory are:
Injection Pressure Regulator (IPR) Valve
from $232.99
(6)
Injection Pressure Regulator (IPR) Valve
Pressure Regulators
Fuel Injection Pressure Regulator
from $244.99
(4)
Fuel Injection Pressure Regulator
Pressure Regulators
Premium Fuel Filter Ensures Clean Fuel for Maximum Engine Efficiency & Longevity
from $39.99
This product is not rated
Premium Fuel Filter Ensures Clean Fuel for Maximum Engine Efficiency & Longevity
Fuel and Water Separators