International 400 Parts
Top International 400 Parts Categories
International 400 Batteries and Chargers
DieHard HD Battery – Battery: 31T Group Size, 1 Year Warranty, 950 CCA, 1140 CA, 175 Minute Reserve Capacity (Part No.31S30)
from
$174.99
DieHard Heavy Duty batteries deliver the starting power your heavy duty applications need. These batteries are designed for commercial trucks, heavy duty and agricultural applications.
Product Features:
See More
Product Features:
- Full frame stamped positive grid design provides increased corrosion resistance and superior cranking power.
- High-density paste improves cycling capability
- Polypropylene ribbed case and reinforced end-walls for extra durability
- Anchor bonding locks elements in place to dramatically improve life with superior vibration resistance
DieHard HD Battery – Battery: 31T Group Size, 1 Year Warranty, 750 CCA, 935 CA, 180 Minute Reserve Capacity (Part No.31XS-30)
from
$149.99
DieHard Heavy Duty batteries deliver the starting power your heavy duty applications need. These batteries are designed for commercial trucks, heavy duty and agricultural applications.
Product Features:
See More
Product Features:
- Full frame stamped positive grid design provides increased corrosion resistance and superior cranking power.
- High-density paste improves cycling capability
- Polypropylene ribbed case and reinforced end-walls for extra durability
- Anchor bonding locks elements in place to dramatically improve life with superior vibration resistance
Optima – Yellow Battery: 31T Group Size, 900 CCA, 1125 CA, 155 Minute Reserve Capacity, Deep-Cycle (Part No.D31T-1125)
from
$399.99
The OPTIMA YELLOWTOP high-performance AGM battery is the ULTIMATE POWER SOURCE and one of the few true dual-purpose automotive batteries available. With premium cranking power and impressive cycling capability, this heavy-duty battery is ideal for trucks with winches, vehicles with high-demand electronics and audio systems, commercial vehicles and heavy equipment. Key benefits of OPTIMA YELLOWTOP batteries include deep-cycling battery and OPTIMAL starting power, up to 3x longer service life, 15x more resistant to vibration, leak proof, mountable in virtually any position, maintenance-free, and more than 300 discharge / recharge cycles. OPTIMA YELLOWTOP batteries work well for tractors or forklifts.
Product Features:
See More
Product Features:
- Faster recharging capabilities
- Maintenance free for maximum convenience
- Completely non-spillable, mountable in many positions
- 15x the vibration resistance of a standard flooded battery
- Up to 3 times longer life vs. standard flooded batteries
- SPIRALCELL TECHNOLOGY with 99.99% pure lead delivers more power and consistently outperforms conventional flat-plate batteries
DieHard HD Battery – Battery: 31T Group Size, 1 Year Warranty, 825 CCA, 1000 CA, 200 Minute Reserve Capacity (Part No.NG31CS)
from
$259.99
DieHard Heavy Duty batteries deliver the starting power your heavy duty applications need. These batteries are designed for commercial trucks, heavy duty and agricultural applications.
Product Features:
See More
Product Features:
- Full frame stamped positive grid design provides increased corrosion resistance and superior cranking power.
- High-density paste improves cycling capability
- Polypropylene ribbed case and reinforced end-walls for extra durability
- Anchor bonding locks elements in place to dramatically improve life with superior vibration resistance
DieHard HD Battery – Battery: 31T Group Size, 1 Year Warranty, 1000 CCA, 1190 CA, 185 Minute Reserve Capacity (Part No.31HDS30)
from
$182.99
DieHard Heavy Duty batteries deliver the starting power your heavy duty applications need. These batteries are designed for commercial trucks, heavy duty and agricultural applications.
Product Features:
See More
Product Features:
- Full frame stamped positive grid design provides increased corrosion resistance and superior cranking power.
- High-density paste improves cycling capability
- Polypropylene ribbed case and reinforced end-walls for extra durability
- Anchor bonding locks elements in place to dramatically improve life with superior vibration resistance
International 400 Belts and Hoses
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22495)
from
$44.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stress, especially on small-diameter pulleys, while dissipating heat.
- High modulus, high strength tensile cord
- Oil and heat-resistant construction throughout
- Meets SAE J636b and SAE J637 specifications
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand joined V-belts
Gates – Green Stripe Truck & Bus Series V-Belt (Part No.TR22380)
from
$27.99
Specifically designed for heavy-duty truck, bus and off-road equipment applications. Absorbs normal shock loads without damage to the belt.
Product Features:
See More
Product Features:
- Molded notches reduce bending stress, especially on small diameter pulleys, while dissipating heat
- High modulus, high strength tensile cord
- Oil and heat resistant construction
- Meets SAE J636b and SAE J637 specifications
- Meets RMA standards for oil and heat resistance and static conductivity requirements
- NOTE: Some sizes available as Gates PowerBand attached V-belts
International 400 Drivetrains
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6038)
from
$40.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHEV 60-02; DODGE 57-02; FORD 55-07; GMC 63-02; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.5750 INCH / 40 MM
- CENTERLINE: 2.48 INCH / 63 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- NOT PICTURED: TWO DUST SHIELDS
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6049)
from
$41.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-90; DODGE 78-81; FORD 75-98; GMC 79-90; INTL 57-02; KW 81-18; MACK 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1957-2018
- Weight approx: 8 Lbs
- BEARING ID / BORE: 2.3622 INCH / 60 MM
- CENTERLINE: 3.37 INCH / 86 MM
- MOUNT WIDTH: 8.62 INCH / 219 MM
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6040)
from
$19.79
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 81-88; CCC 87-13; CHEV 60-97; DODGE 78-81; FORD 75-98; GMC 79-97; INTL 57-02; KW 81-18; MACK 80-93; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1957-2018
- Weight approx: 4 Lbs
- BEARING ID / BORE: 1.7680 INCH / 45 MM
- CENTERLINE: 2.75 INCH / 70 MM
- MOUNT WIDTH: 7.62 INCH / 194 MM
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6056)
from
$21.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to AUTOCAR 84-88; CHECKER 55-82; CHEV 60-12; DODGE 57-02; FORD 55-10; GMC 63-07; INTL 57-02; ISUZU 96-01; KW 81-18; MACK 80-90; MAZDA 87-94; MITS 87-09; OLDS 90-01; PLYM 80-83; PTRB 65-83; WHGM 88-95; WHIT 81-88;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2018
- Weight approx: 3 Lbs
- BEARING ID / BORE: 1.3780 INCH / 35 MM
- CENTERLINE: 2.28 INCH / 58 MM
- MOUNT WIDTH: 6.62 INCH / 168 MM
- STYLE: ROUND FRAME
- COMPLETE MOUNT
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.6035)
from
$13.49
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to CHEV 58-02; GMC 55-02; INTL 57-02;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1955-2002
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- CENTERLINE: 3.50 INCH / 89 MM
- MOUNT WIDTH: 1.50 INCH / 38 MM
- COMPLETE MOUNT
Search Over 64 International 400 Parts Online for Delivery or Pick Up
Looking for the best International 400 aftermarket replacement parts? Replacing worn and broken parts on your International 400? Check out our online catalog to find the best selection of aftermarket International 400 parts as well as real user reviews on International 400 replacement parts. Make an informed decision about every component you add to your 400.
At Advance Auto, we’ve got you covered when it comes to getting your International 400 in tip top condition. We’ve got over 64 International 400 parts to choose from in popular categories like Batteries and Chargers, Automotive Accessories and Belts and Hoses. If you’re looking for the best prices, try searching our International 400 parts catalog to compare OEM and aftermarket parts for your International 400.
Whether you need International 400 body parts, interior components, or custom International 400 parts you can find them online at Advance Auto. Want to order your Drivetrains online? Or maybe you need your International Transmission Parts same day? No problem, you can pick up 400 parts in person at locations across the country, or have them delivered to straight to your door after ordering online. Finding a great deal on new and used International 400 parts has never been easier.
Popular Types of Parts for International 400
Advance Auto customers frequently search for the following types of International 400 auto parts. Check out customer reviews and ratings, and compare prices on the following International 400 parts:
Find Parts for Your International 400 by Year
People also search Advance Auto for these popular years of the International 400:
