International 1300D Ignition and Tune-Up Products

Essential International 1300D Ignition and Tune-Up Products

Carquest – Ignition Coil (Part No.26C1078)

Ignition Coil

from

$34.49
Carquest Ignition Coils ensure fast starts, consistent engine performance and optimized fuel efficiency at an affordable cost.

Product Features:
  • High output
  • Long spark duration
  • High dielectric strength
  • Corrosion resistant connections
  • High reliability
  • Long service life
See More

Carquest Premium – Distributor Rotor (Part No.DAA1004)

Distributor Rotor

from

$6.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

PerTronix – 1481 Ignitor IHC 8 cyl (Part No.1481)

1481 Ignitor IHC 8 cyl

from

$134.99
For over thirty years, the Ignitor has proven itself in applications ranging from race cars to tractors. The Ignitor replaces breaker points and troublesome factory electronic ignitions with a dependable, self contained and maintenance free electronic ign

Product Features:
  • PerTronix 1481 Ignitor IHC 8 cyl
  • Delivers twice the voltage to the spark plugs, increasing horsepower, fuel economy, and spark plug life.
See More

Autolite – Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration (Part No.AP85)

Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration

from

$4.29
With over 100 years of engineering expertise and more than 11 billion plugs sold, Autolite Platinum spark plugs are designed and engineered in the USA to deliver exceptional performance. Featuring a high nickel alloy side electrode that maintains a precise gap and a full platinum tip that ensures virtually no gap erosion, these spark plugs offer long-lasting durability. The necked-down center electrode fires quicker and cleaner with less voltage, resulting in easier starts, quicker acceleration, and improved fuel economy compared to standard plugs.

Product Features:
  • High nickel alloy side electrode maintains precise gap
  • Full platinum tip assures virtually no gap erosion for long life
  • Necked-down center electrode fires quicker, cleaner with less voltage for easier starts, quicker acceleration and improved fuel economy (as compared to standard plugs)
  • Improved Fuel Economy: Designed to enhance fuel efficiency compared to standard plugs.
  • Gasket Seat Type: Ensures a secure fit and optimal performance.
See More

Champion – Champion Copper Plus Small Engine- Single Card – J6C (Part No.823-1)

Champion Copper Plus Small Engine- Single Card - J6C

from

$2.49
Dependable performance. This Champion spark plug features a copper core electrode that provides increased conductivity and heat control for good overall wear.

Product Features:
  • Resists fouling
  • Superior corrosion resistance
  • Dependable and proven performance
  • Increased conductivity and heat control for good overall wear
See More

Carquest – Distributor Cap (Part No.24C1021)

Distributor Cap

from

$11.79
High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:
  • High-quality products that meet OE appearance and performance to
See More

Carquest – Distributor Cap (Part No.C168)

Distributor Cap

from

$14.99
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Distributor cap uses glass-filled polyester resin with dielectric strength as high as 630 volts per mil, for optimum performance.
  • Distributor cap has aluminum terminals to match OE performance.
  • The BWD SELECT® exceed the original performance. The benefit is greater customer confidence.
  • BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product
See More

Felpro – Distributor Mounting Gasket (Part No.12665)

Distributor Mounting Gasket

from

$1.49
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Felpro – Distributor Mounting Gasket (Part No.70051)

Distributor Mounting Gasket

from

$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust

Product Features:
  • Meets or exceeds all original equipment specifications
  • Application specific design to ensure a perfect fit
  • Engineered for the sealing repair environment
  • Validated for fit, form and function
  • Unsurpassed quality you can trust
See More

Carquest Premium – Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit (Part No.35-6309)

Spark Plug Wire Set: 7 Wires, Increased performance, Designed for direct fit

from

$34.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Ignition Coil Mounting Bracket (Part No.MBA1001)

Ignition Coil Mounting Bracket

from

$11.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

Product Features:
  • Premium quality materials for longer service life
  • Designed to meet or exceed OE specifications in form, fit and function
See More

ACDelco – Ignition Capacitor (Part No.D204)

Ignition Capacitor

from

$16.99
ACDelco Professional Ignition Condenser is a high quality aftermarket replacement component for one or more of the following vehicle systems: cooling, hvac, ignition, starting and charging, body-electrical and lighting, wiper and washer, and/or engine fuel management. This premium aftermarket condenser is manufactured to meet or exceed your expectations for fit, form, and function.

Product Features:
  • Professional, premium aftermarket replacement
  • Provides the performance and dependability you expect from ACDelco
  • Manufactured to meet expectations for fit, form, and function
See More

Carquest Premium – Ignition Condenser (Part No.GAA1037)

Ignition Condenser

from

$11.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More

Carquest – Ignition Condenser, Capacitance Rating: 0.18-0.23 (Part No.G120A)

Ignition Condenser, Capacitance Rating: 0.18-0.23

from

$20.05
BWD SELECT replacement parts are designed, specified and manufactured with one goal in mind – to make them the very best. We use the finest materials and improve on OE specifications whenever possible. The result is maximum performance and longevity.

Product Features:
  • Offering hundreds of high-quality pigtails & sockets for nearly every electrical job
  • Utilizing high grade materials to ensure peak conductivity and perfect connections
See More

Carquest Premium – Ignition Tune-Up Kit (Part No.CBA1835)

Ignition Tune-Up Kit

from

$17.49
Ignition Tune-Up Kit

Mallory – Mallory Prosidewinder 90F Univ. Wire Set (Part No.937)

Mallory Prosidewinder 90F Univ. Wire Set

from

$133.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

Mallory – Mallory Prosidewinder 135F Univ/Wire Set (Part No.947)

Mallory Prosidewinder 135F Univ/Wire Set

from

$153.99
Features at a glance, low 300 Ohm resistance spiral core delivers high energy output for maximum spark at the plug. Great RFI suppression meets the demands of today’s on-board electronics, such as electronic ignition, sound systems, and computer controls. 8MM ozone-resistant red silicone jacket repels water, oil, grease, and fuel, and withstands temperatures up to 500 degrees. Fits V8, universal wire kit: includes 45 degree spark plug boots, female socket (standard) distributor boots and terminals.

Product Features:
  • Most Advanced Wire By Mallory
  • RFI Suppression
  • High Temperature Silicone Jacket
  • Withstands Over 500+F
  • Come In Ready To Use Kits
  • Extra Long Kits
See More

PerTronix – 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red (Part No.808415)

808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red

from

$81.99
8mm Custom fit MAGx2 wires are available for many popular applications equipped with Flame-Thrower or original GM HEI distributors. Our custom wire sets have factory terminated ends for a superior connection and perfect fit, without cuttting, crimping and

Product Features:
  • PerTronix 808415 Flame-Thrower Spark Plug Wires 8 cyl 8mm Universal 115 Degree Red
  • Two current paths for reliability and redundancy. -Primary path: Spiral wound stainless steel alloy.-Secondary path: Carbon impregnated fiberglass center core.
See More

DENSO – Spark Plug Wire Set: Carbon Core, 9 Wire Set (Part No.671-8003)

Spark Plug Wire Set: Carbon Core, 9 Wire Set

from

$67.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8315)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$33.49
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

Carquest Premium – Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit (Part No.35-8316)

Spark Plug Wire Set: 9 Wires, Increased performance, Designed for direct fit

from

$43.99
Product Features:
  • SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
  • Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
  • 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
  • EPDM inner insulation stops power-robbing voltage leaks.
  • With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
  • Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
  • Excellent interference suppression and consistent performance
  • Easy lock terminals for more convenient installation.
  • Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
  • Broad coverage available for most vehicles on the road today
  • Include grease pack to ensure easy installation and removal
See More

DENSO – Spark Plug Wire Set: Carbon Core, 7 Wire Set (Part No.671-6002)

Spark Plug Wire Set: Carbon Core, 7 Wire Set

from

$58.99
DENSO First Time Fit Ignition Wire Sets are identical in form fit color and performance to the factory-installed wire sets. Every part of each wire sets construction meets or exceeds OE/OES standards.

Product Features:
  • Each wire is pre-cut to exact length so the wire set is ready to install right out of the box
  • Identical OE end caps are designed to “click” into place for easy installation and a secure fit
  • Strong connections – through a patented process, the terminals are attached to provide an extremely strong connection, ensuring the cable and boot will not separate during removal and installation
See More

Helping You Find the Right Ignition and Tune-Up Products for Your International 1300D

You love your 1300D. So we’ve made it easier than ever to help you find International 1300D Ignition and Tune-Up Products in our online catalog. Our inventory holds 86 aftermarket and OEM Ignition and Tune-Up Products for your International 1300D, ranging from $1.49 to $195.99.

We offer parts from 16 brands trusted to make quality Ignition and Tune-Up Products for your International 1300D. Before you buy, take some time to read through customer reviews. We currently have 3,073 reviews of International 1300D Ignition and Tune-Up Products from previous customers. Some of the top rated parts include Ignition Coil with 4.5 stars and DiamondFIRE Automotive Spark Plug: More Power, Saves Gas with 3.9 stars.

Find your 1300D Ignition and Tune-Up Products here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your International 1300D part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.

Top Ignition and Tune-Up Products Brands for Your International 1300D

Our inventory holds Ignition and Tune-Up Products for your International 1300D from 16 trusted brands. You’ll find OEM and aftermarket parts from brands like NGK, ACDelco, and Champion, all of which can keep that International happy.

Top-Rated NGK Ignition and Tune-Up Products

Leading NGK Ignition and Tune-Up Products

We carry NGK brand parts for your International 1300D across several catalog categories, including Spark Plugs. Some of our most reviewed NGK parts include:

FAQs for International 1300D Ignition and Tune-Up Products

What are the most purchased Ignition and Tune-Up Products for the International 1300D?

Out of 86 Ignition and Tune-Up Products for the International 1300D, the most popular in our inventory are:
Copper Core Spark Plug
from $4.99
(13)
Copper Core Spark Plug
Spark Plugs

What are the top-rated International 1300D Ignition and Tune-Up Products?

Top-rated Ignition and Tune-Up Products for your International 1300D based on customer reviews/ratings are:
Ignition Coil
from $35.05
(17)
Ignition Coil
“I used this on my 1950 ford tractor.”
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
from $4.29
(10)
Platinum Spark Plug: Fires Cleaner, Easier Starts, Quicker Acceleration
“I used these plugs on a 400 bb mopar with 64/426 wedge heads .made tho engine run so much better the your standard copper plugs.yes I will buys these ”