Infiniti M45 Drivetrains
Top Infiniti M45 Drivetrains Categories
We carry over 49 Drivetrains in inventory for the Infiniti M45. If you’re looking for aftermarket Drivetrains for your Infiniti M45, check out all these categories:
Essential Infiniti M45 Drivetrains
National – Bearings (Part No.32306)
from
$44.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Matched cup and cone components ensures consistent quality and outstanding performance
- Industry leading coverage
- Professional technicians know they can depend on National
EMPI – RE CV Joint Boot Kit (Part No.K6010181566EMP)
from
$28.35
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
National – Bearings (Part No.210)
from
$50.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
National – Oil Seal (Part No.710916)
from
$22.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Compatible with most oils and EP lubricants at higher operating temperatures
- High resistance to oxidation and ozone and has low swell in hydrocarbon fluids
- Temperature range: -20°F to 300°F; -29°C to 149°C
- National® oil seals are recognized worldwide for their quality and reliable performance for every type of repair.
SKF – Trans Case Shaft Sea (Part No.J5088255681SKF)
from
$17.92
Trans Case Shaft Sea
National – Shaft Repair Sleeve (Part No.99157)
from
$37.49
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Corteco – Differential Seal (Part No.J7040175170CFW)
from
$23.37
Differential Seal
FAG – Wheel Bearing (Part No.K800027799FAG)
from
$22.78
FAG is a supplier of original equipment wheel bearings, hubs and seals to major automobile manufacturers and 1st/2nd tier suppliers throughout the world. All FAG wheel bearings are maintenance free and have been designed for the entire life of the vehicle.
Product Features:
See More
Product Features:
- Original Equipment Quality
- Maintenance free
- Premium modified bearing steel
Dorman – Front Drive Shaft (Part No.938-320)
from
$621.99
Replacing a drive shaft doesn’t have to be complicated. This complete drive shaft assembly is pre-balanced and ready to install with 100% new yokes, tubes, constant velocity (CV) joints and universal joints.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft is made to the original equipment dimensions for dependable fit and performance.
- 100% new – this drive shaft is made from all new components so there’s no core charge or return hassle.
- Ready to install – this drive shaft arrives pre-balanced to make installation quick and simple
- Serviceable construction – non-staked universal joints are designed for future serviceability
MTC – Differential Drain P (Part No.J7058947963MTC)
from
$2.09
Differential Drain P
National – Bearings (Part No.107)
from
$33.99
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
EMPI – RE CV Joint Boot Kit (Part No.K6010181568EMP)
from
$29.15
With Clamps and Grease The EMPIRE CV Joint Boot Kit is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function. Install one boot kit per wheel to restore vehicle to optimal condition and protect the constant velocity joint from contamination
Product Features:
See More
Product Features:
- Help restore the vehicle to like-new condition
- Constructed of high strength OE materials
- Resists environmental contamination
- Protects the CV joint from premature failure
Ohno – Clamp – CV Boot (Part No.4I250142473OHN)
from
$5.61
Clamp – CV Boot
Dorman – Spindle Nut (Part No.K1002754968DOR)
from
$15.78
Spindle Nut
Valvoline – Transfer Case Fluid, 1 Quart (Part No.855459)
from
$14.99
Valvoline Multi-Vehicle Transfer Case Fluid is a full synthetic product meeting the performance needs for transfer cases recommending Ford XL-12 and GM Auto Trak II specifications or ATF fluids (DEX/MERC, ATF +4, etc).
Product Features:
See More
Product Features:
- Recommended for use in most Ford, GM and FCA (Dodge, Jeep) models
- Formulated to help prevent gear wear and protect against rust and corrosion
- Formulated to deliver enhanced protection against deposits
- Helps provide better protection during extreme operating conditions
Valvoline – DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart (Part No.822405)
from
$14.49
Valvoline DEXRON-VI/MERCON LV ATF is a full-synthetic transmission fluid formulated with advanced additive technology to meet and exceed the requirements of the General Motors DEXRON-VI specification. It is officially licensed and approved by GM and is fully back-serviceable and can be used wherever DEXRON-II and/or DEXRON-III are recommended. Recommended for use in the following applications: DEXRON-VI, DEXRON-III, DEXRON-II, and Allison C-4.
Product Features:
See More
Product Features:
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
National – Bearings (Part No.108)
from
$49.49
National Oil Seals & Bearings offer a full line of premium oil seals and bearings.
Product Features:
See More
Product Features:
- Premium bearing design matches OEM specifications
- Precision manufactured using premium-grade steel for outstanding durability and performance
- Controlled heat treating process for lasting performance and extended bearing life
- Industry leading coverage
- Professional technicians know they can depend on National
Dorman – Spindle Nut M24-1.50 Hex 32mm (Sold by each) (Part No.615-223)
from
$7.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models.
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Cardone – Axle Assembly (Part No.K4000317635CAR)
from
$466.51
Based on over 45 years of making top-rated remanufactured products, we have seen where and why original parts fail. This unique, reverse-engineering expertise is the foundation of CARDONE Select Engineered (CSE) Technology. The CSE process identifies and corrects original design flaws, resulting in longer-lasting, reliable new CV axles.
Product Features:
See More
Product Features:
- 100% Neoprene boots are designed with additional bellows to resist bellow stress and ozone cracking, the leading cause of boot failure.
- A new axle nut is supplied with every unit for hassle-free installation, as the old nut on the vehicle is typically worn or stripped.
- Axle is measured 100% after assembly to ensure proper fit.
- Boot clamps are pneumatically crimped creating a perfect seal between the boot and housing.
- CARDONE Select Engineered (CSE) Technology ensures that all CV axles meet or exceed O.E. form, fit and function.
- High quality grease withstands high-temperature and high-torque demands to ensure long-lasting, reliable performance.
- Splines are precision rolled to ensure proper fit of axle into the mating hub and transmission, which eliminates installation hassles.
- Threads are precision rolled to ensure proper fit when axle nut is installed.
- Transmission seal diameter is precision-machined after heat treatment to ensure correct surface finish, promoting long seal life
Carquest Premium – CV Axle Assembly (Part No.NCV53500)
from
$109.99
All CARQUEST axles have a new zinc dichromate plated nut or attaching hardware. CV joint grease has a high moly content. The boot bands are made from stainless steel, and the boots are manufactured to resist wear and damage due to extreme high and low temperatures.
Product Features:
See More
Product Features:
- 100% New Axle
- Quality Engineered for Superior Durability
- Tested for Reliable Performance
- No Core Exchange
Autopart International Inc – Axle Assembly (Part No.K40003128138API)
from
$239.14
Axle Assembly
Autopart International Inc – Axle Assembly (Part No.K40003128165API)
from
$211.63
Axle Assembly
Infiniti M45 Drivetrains Categories
Helping You Find the Right Drivetrains for Your Infiniti M45
You love your M45. So we’ve made it easier than ever to help you find Infiniti M45 Drivetrains in our online catalog. Our inventory holds 49 aftermarket and OEM Drivetrains for your Infiniti M45, ranging from $2.02 to $1,201.99.
We offer parts from 18 brands trusted to make quality Drivetrains for your Infiniti M45. Before you buy, take some time to read through customer reviews. We currently have 4,178 reviews of Infiniti M45 Drivetrains from previous customers. Some of the top rated parts include Wheel Bearing with 5.0 stars and Shaft Repair Sleeve with 5.0 stars.
Find your M45 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Infiniti M45 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Infiniti M45
Our inventory holds Drivetrains for your Infiniti M45 from 18 trusted brands. You’ll find OEM and aftermarket parts from brands like Valvoline, Royal Purple, and National, all of which can keep that Infiniti happy.
We have Anchor parts available for your Infiniti M45 in categories like Drive Shafts and Axles. Some of the top-rated Anchor parts in these categories are:
Top-Rated Valvoline Drivetrains
Leading Valvoline Drivetrains
We carry Valvoline brand parts for your Infiniti M45 across several catalog categories, including Differentials. Some of our most reviewed Valvoline parts include:
from
$32.99
(235)
High Performance Transmission & Differential Gear Oil: Conventional 80W-90, 1 Gallon
Differential Oil
FAQs for Infiniti M45 Drivetrains
What are the most purchased Drivetrains for the Infiniti M45?
Out of 49 Drivetrains for the Infiniti M45, the most popular in our inventory are:
from
$14.49
(2)
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
from
$12.99
(82)
High Performance SAE 5W30 Synthetic Motor Oil, API Certified, 1 QT
Differential Oil
from
$12.99
This product is not rated
HMX SAE 5W-30 High-Mileage Synthetic Engine Oil (1 Quart)
Differential Oil
What are the top-rated Infiniti M45 Drivetrains?
Top-rated Drivetrains for your Infiniti M45 based on customer reviews/ratings are:
from
$76.14
(2)
Wheel Bearing
“I previously had the K&N Air Filter which gave it a little boost. I upgraded to the Air Intake and it was well worth cash. The car has more power and ”
from
$39.99
(1)
Shaft Repair Sleeve
“used these speedy sleeves on the front axle of my Kubota with the wheel seals,saved me from spending 15 times more on the axle’s, Thank’s”
