Infiniti M35 Fuel and Emissions Systems
Top Infiniti M35 Fuel and Emissions Systems Categories
We carry over 76 Fuel and Emissions Systems in inventory for the Infiniti M35. If you’re looking for aftermarket Fuel and Emissions Systems for your Infiniti M35, check out all these categories:
Essential Infiniti M35 Fuel and Emissions Systems
Carquest Premium – Vapor Canister (Part No.CPN1537)
from
$504.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Evaporative Emissions Canister Vent Valve (Part No.911-504)
from
$115.99
A malfunctioning vapor canister vent solenoid can cause the engine light to come on. This vapor canister vent solenoid is engineered of quality materials for durability to ensure proper operation of the vehicle’s evaporative emissions system.
Product Features:
See More
Product Features:
- Direct replacement – this vapor canister vent solenoid fits and performs like original equipment with simple plug-and-play installation
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment function at a lower price
- Quality tested – has undergone simulation and endurance testing to ensure proper fit and performance
Carquest Premium – Fuel Injector Seal Kit (Part No.AS045)
from
$5.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Spectra Premium – Mass Air Flow Sensor (Part No.MA159)
from
$159.99
Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium mass air flow sensors meet or exceed the performance of the original equipment they replace.
Product Features:
See More
Product Features:
- Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE engine management systems design expertise
- Platinum connector threads reduce the number of connection points for faster reaction to change
- Ceramic-built printed circuit boards are protected by silica gel, providing superior resistance to temperature changes and vehicle vibrations
- Ceramic board provides reliable voltage to eliminate engine rough-idle problems
- Each new sensor is road tested to ensure real world performance and to verify that each design meets our high standards for quality
- Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
- Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Dorman – Evaporative Emissions Purge Solenoid Valve (Part No.911-338)
from
$136.99
Engineered for a perfect fit and plug-and-play installation, this vapor canister purge valve is a direct replacement for the original equipment purge valve. It is critical to the evaporative emissions system and fulfills government requirements.
Product Features:
See More
Product Features:
- Direct replacement – this vapor canister purge valve fits and functions like original equipment to ensure proper function of your vehicle’s evaporative emissions system
- Quality construction – manufactured from premium materials for a long service life
- Excellent value – original equipment quality at a lower price
- Quality tested – has undergone testing to ensure proper fit and performance
NTK – NTK Oxygen Sensor (Part No.C5010324698NTK)
from
$199.46
NTK is the world’s largest supplier and manufacturer of original equipment oxygen sensors. NTK oxygen sensors meet or exceed original equipment specifications and are equipped with waterproof factory fitted connectors to ensure a perfect fit every time. Every NTK oxygen sensor is individually tested to ensure the highest level of quality and reliability.
Product Features:
See More
Product Features:
- OE-Equivalent.
- Direct fit for easy installation.
- Extensively Tested During Manufacture to Guarantee Quality and Reliability
- Supplied With a Factory-Fitted OEM Connector for Easy Installation
Carquest Premium – Ambient Air Temperature Sensor (Part No.WTA1132)
from
$45.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Injector Connector (Part No.PTA1064)
from
$4.29
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Delphi – Fuel Tank Cleaning Kit (Part No.FC01)
from
$12.49
To perform a complete fuel pump replacement, clean the tank every time. Order the Delphi Fuel Tank Cleaning Kit (Part FC01). Remember, the original pump went into a clean fuel tank, to ensure the same level of performance, the new pump should too. 100 ye
Product Features:
See More
Product Features:
- Helps avoid premature fuel pump failure
- Lint free towel included
- Low suds formulation
- Removes harmful contaminants from the fuel tank
Felpro – Fuel Injection Throttle Body Mounting Gasket (Part No.61342)
from
$3.29
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered and manufactured specifically for the repair environment
- Unsurpassed quality you can trust
- Validated for fit, form, and function
NTK – Switching Oxygen Sensor: 4 Wire, 18.5" Long, Heated, Direct Fit (Part No.24450)
from
$137.99
NTK is the world’s largest supplier and manufacturer of OEM oxygen sensors. Oxygen sensors play a critical role as part of the vehicle’s on-board diagnostic system in maintaining optimal engine performance, maximizing fuel efficiency and reducing harmful emissions. Providing constant closed loop feedback to the ECU, oxygen sensors help to control the air-fuel ratio while alerting OBDII systems of possible problems with fuel delivery or catalytic converter efficiency. A ceramics company at our core, NTK uses state-of-the art technology enabling control of the ceramic element used in our oxygen sensors from raw material to finished product. Trust The Sensor Specialist for full-line market support and OE application technology.
Product Features:
See More
Product Features:
- OEM QUALITY: NTK is the world’s largest supplier of original equipment oxygen sensors with renowned quality that meets or exceeds OEM specifications
- PRODUCT ENGINEERING: Based on OE expertise, but specifically engineered for the aftermarket, NTK Oxygen Sensors offer superior OE fit, form, function
- OE TECHNOLOGY: Upgraded to the latest OE technologies, NTK Oxygen Sensors are designed to reduce OE failures, enhance durability and performance
- EXTENSIVE TESTING: OE development includes vibration and thermal shock testing. Testing during manufacturing guarantees quality and reliability
- EASY INSTALLATION: NTK Oxygen Sensors are equipped with OE specified, water-resistant connectors and harness accessory hardware for easy installation
- ADVANCED CERAMIC SENSOR ELEMENT: 3-stage contaminant-resistant plasma jet and deposit trap overcoat protects against element poisoning
- NTK ADVANTAGE: Superior dual-coated platinum interface and thinner ceramic element produces fastest light off and response times with best durability
Ishino – Fuel Rail Insulator (Part No.C1008251685ISH)
from
$1.83
Fuel Rail Insulator
Carquest Premium – Locking Fuel Cap: 10508, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack (Part No.10508)
from
$24.99
Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.
Product Features:
See More
Product Features:
- Protects your fuel from theft and vandalism
- Passes all state and federal emissions tests
- Manufactured from durable, long-life materials
- Reduces air pollution with proper sealing and venting
- Independently tested for emission control
Ishino Stone – Fuel Injector O-Ring (Part No.C1012262676ISH)
from
$2.14
Fuel Injector O-Ring
Carquest Premium – Fuel Injector Seal Kit (Part No.AS051)
from
$8.29
CARQUEST fuel injector seal kits include the necessary O-rings and seals to properly reseal the injector, which is a recommended practice any time the injector is removed. Each kit services one injector and includes hard to find or previously dealer-only components.
Product Features:
See More
Product Features:
- Premium OE quality materials
- Services one injector
Delphi – Fuel Tank Sending Unit (Part No.FL0421)
from
$306.99
100 years of OE experience, supplier to the world’s top automakers, OE Heritage and knowledge built into every aftermarket part, comprehensive portfolio for a wide range of vehicles and model years.
See More
Carquest Premium – Remanufactured Fuel Injector (Part No.A212-3274)
from
$48.49
CARQUEST’S line of remanufactured OEM fuel injectors are remanufactured using a proven 15 step process at a state-of-the-art remanufacturing facility in the U.S.A. Each injector is 100% tested under multiple operating conditions to ensure each injector meets or exceeds OE specifications for flow rate, spray pattern, coil resistance, form, fit and function. Each injector includes new external seals and O-rings.
Product Features:
See More
Product Features:
- Each unit is 100% tested to OE specifications
- Includes new O-rings and seals made of premium OE quality materials
- Includes application specific technical bulletin, where applicable
Felpro – Exhaust Gas Recirculation (EGR) Valve Gasket (Part No.70893)
from
$6.79
Fel-Pro gaskets offer 100% vehicle sealing with application-specific materials to give you sealing solutions with the performance and durability professionals trust
Product Features:
See More
Product Features:
- Meets or exceeds all original equipment specifications
- Application specific design to ensure a perfect fit
- Engineered for the sealing repair environment
- Validated for fit, form and function
- Unsurpassed quality you can trust
Carquest Premium – Vapor Canister Purge Solenoid (Part No.CPA1238)
from
$113.99
Carquest premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Dorman – Purge Valve (Part No.B7080326111DOR)
from
$158.48
Purge Valve
Gates – Breather Hose (Part No.B2010394234GAT)
from
$39.91
Breather Hose
Ishino Stone – Fuel Injector O Ring (Part No.C1012251349ISH)
from
$1.91
Fuel Injector O Ring
Carquest Premium – Fuel Tank Pressure Sensor (Part No.ECA1282)
from
$40.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
See More
Carquest Premium – Fuel Pump Module Assembly: Fuel Pump, Sending Unit and Strainer (Part No.M2496321)
from
$192.99
Carquest Premium fuel pump modules and assemblies are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. We have invested in industry-leading quality improvements like upgraded turbine impellers and 100% carbon commutators to deliver greater reliability. Carquest Premium fuel pump modules are supplied with the pump strainer and gaskets or seals when required for the application. Carquest Premium fuel pump modules are engineered with superior quality components to provide the longest life and reliable performance.
Product Features:
See More
Product Features:
- Meets or exceeds OE specifications for fit, form and function
- 100% carbon commutators provide resistance to aggressive fuels and double the life expectancy of the pump
- OE upgraded turbine impellers greatly reduce fuel pulsation
- All fuel pumps are 100% performance tested
- Includes installation gaskets or seals where applicable
Carquest Premium – Fuel Cap Tester Adapter (Part No.12422)
from
$39.99
Fuel Cap Tester Adaper for use with Stant fuel cap testers. Color coded for easy identification. Made of durable plastic.
Product Features:
See More
Product Features:
- BAR Certified adapters
- Adapter check’s a fuel cap’s ability to hold pressure.
- Adapters meet EPA standards for recommended fleet coverage.
- Check adapter application chart for specific makes and models
Infiniti M35 Fuel and Emissions Systems Categories
Helping You Find the Right Fuel and Emissions Systems for Your Infiniti M35
You love your M35. So we’ve made it easier than ever to help you find Infiniti M35 Fuel and Emissions Systems in our online catalog. Our inventory holds 76 aftermarket and OEM Fuel and Emissions Systems for your Infiniti M35, ranging from $1.83 to $504.99.
We offer parts from 19 brands trusted to make quality Fuel and Emissions Systems for your Infiniti M35. Before you buy, take some time to read through customer reviews. We currently have 5,042 reviews of Infiniti M35 Fuel and Emissions Systems from previous customers. Some of the top rated parts include Switching Oxygen Sensor: 4 Wire, 14.5" Long, Heated, Direct Fit with 5.0 stars and Switching Oxygen Sensor: 4 Wire, 18.5" Long, Heated, Direct Fit with 5.0 stars.
Find your M35 Fuel and Emissions Systems here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Infiniti M35 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Fuel and Emissions Systems Brands for Your Infiniti M35
Our inventory holds Fuel and Emissions Systems for your Infiniti M35 from 19 trusted brands. You’ll find OEM and aftermarket parts from brands like Carquest Premium, Felpro, and Motorad, all of which can keep that Infiniti happy.
We have Dorman parts available for your Infiniti M35 in categories like Vapor Canister Purge Valves. Some of the top-rated Dorman parts in these categories are:
Top-Rated Carquest Premium Fuel and Emissions Systems
Leading Carquest Premium Fuel and Emissions Systems
We carry Carquest Premium brand parts for your Infiniti M35 across several catalog categories, including Gas Caps. Some of our most reviewed Carquest Premium parts include:
from
$24.99
(69)
Locking Fuel Cap: 10508, Twist-Lock, Direct Fit, Provides Tight Seal, 1 Pack
Gas Caps
FAQs for Infiniti M35 Fuel and Emissions Systems
What are the most purchased Fuel and Emissions Systems for the Infiniti M35?
Out of 76 Fuel and Emissions Systems for the Infiniti M35, the most popular in our inventory are:
What are the top-rated Infiniti M35 Fuel and Emissions Systems?
Top-rated Fuel and Emissions Systems for your Infiniti M35 based on customer reviews/ratings are:
from
$111.99
(7)
Switching Oxygen Sensor: 4 Wire, 14.5" Long, Heated, Direct Fit
“Fit my car exactly”
from
$137.99
(6)
Switching Oxygen Sensor: 4 Wire, 18.5" Long, Heated, Direct Fit
“Bought this because the car was turning off by itself and my mechanic found a P0131 code in my Nissan Versa. So far the car is working normally now.”
from
$24.99
(6)
Locking Fuel Cap: 10512, Screw On, Direct Fit, Provides Tight Seal, 1 Pack
“Perfect fit for my car”
