Infiniti M35 Steering and Chassis Parts
Top Infiniti M35 Steering and Chassis Parts Categories
We carry over 72 Steering and Chassis Parts in inventory for the Infiniti M35. If you’re looking for aftermarket Steering and Chassis Parts for your Infiniti M35, check out all these categories:
Essential Infiniti M35 Steering and Chassis Parts
Carquest Premium – OE matched design for Form, Fit, and Function (Part No.310-234165)
from
$55.99
Advanced corrosion-resistant electro-coating to reduce rust
Product Features:
See More
Product Features:
- Polished full ball studs combined with synthetic bearing technology for smooth operation and improved reliability
- Hex formed studs &/or wrench flats for ease of installation
- Hardware included for easier installation (where applicable)
Hitachi – Power Steering Pump (Part No.PSP0011)
from
$318.99
Designed to meet the exact needs of each specific vehicle, Hitachi’s Power Steering Pumps are the premium choice.
Product Features:
See More
Product Features:
- Hitachi is a Tier 1 OE supplier for Power Steering Pump
- Hitachi is a Tier 1 OE supplier for Power Steering Pump
- Meets the OE performance and durability standards for this application
- Aluminum housing for increased weight reduction and high thermal efficiency
- Precision machined surfaces reduce pressure loss and decrease Noise, Vibration, and Harshness (NVH)
- High strength internal components result in greater longevity and efficiency
- Pulley always included, O-Ring/Gaskets included when applicable
Original Equipment – P S Oil Pressure Swi (Part No.M2095408572OEA)
from
$92.67
P S Oil Pressure Swi
Carquest Premium – End Fittings – Straight (Part No.34819)
from
$9.79
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Zinc coated tubes protect against rust and corrosion
Dorman – Alignment Caster / Camber Control Arm (Part No.528-105)
from
$475.99
This replacement caster camber control arm is adjustable to allow for proper wheel alignment, such as after collision repairs, and for vehicles with modified suspensions or aftermarket wheels.
Product Features:
See More
Product Features:
- Direct replacement – this control arm matches the geometry of the factory part and allows for fine adjustments required for proper wheel alignment
- Ideal solution – adjustable replacement for an original control arm that can no longer ensure correct alignment after collision repairs, suspension modifications or the installation of aftermarket wheels
- Durable construction – this part is made from quality materials for reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Cardone – Power Steering Reservoir – New (Part No.M2030257698CAR)
from
$187.65
Import Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE new reservoirs offer installers a stand-alone replacement solution or complement a power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.
Product Features:
See More
Product Features:
- 100% testing ensures leak-free performance.
- New reservoir cap is included.
- O.E. design is strictly followed to ensure proper fit and function.
Rare Parts – Sway Bar Frame Bushing (Part No.RP22232)
from
$24.49
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Cardone – Power Steering Filter (Part No.20-0058F)
from
$42.99
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Original Equipment – Steering Column Lock (Part No.M5076948029OEA)
from
$2.84
Steering Column Lock
Cardone – Rack and Pinion Assembly (Part No.26-3048)
from
$533.99
Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.
Product Features:
See More
Product Features:
- 100% replacement of rubber sealing components.
- Application of specialized lubricant(s) for extended life.
- Finished in protective coating to prevent corrosion and rust.
- Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
Rein – Pressure Sensor (Part No.ELP0280)
from
$54.99
Rein Automotive pressure sensors are made to factory specifications ensuring proper fit, form and function. A working pressure sensor is used to monitor the particle filter. The sensor alerts that the particle filter is starting to get clogged due to carbon build up. A build up in the exhaust can cause excessive back pressure damaging engine components. Rein pressure sensors are constructed from materials that meet factory OE requirements. Our quality pressure sensors filters aim to provide the professional repair technician and vehicle owner the peace of mind and trust that is expected from an OE component.
Product Features:
See More
Product Features:
- Direct replacement
- Designed to meet or exceed factory specifications.
- Made using high quality materials.
- Uses vehicle specific style connector for quick replacement.
MTC – Ball Joint Shim (Part No.L2019333907MTC)
from
$14.52
Ball Joint Shim
MOOG – Stabilizer Bar Link (Part No.K750187)
from
$87.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Omega – P/S Hose Fitting (Part No.M20231467173OME)
from
$9.11
P/S Hose Fitting
EMPI – re Steering Rack Boot (Part No.M1010568882EMP)
from
$21.46
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
EMPI – re Steering Rack Boot (Part No.M1010568879EMP)
from
$15.95
The Empire Steering Rack Boot is a high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Manufactured to meet or exceed OE specifications
Carquest Premium – Pressure Hose (Part No.40308)
from
$156.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
- Banjo end lock tabs prevent hose end from loosening
- Heat/abrasion tubing protects vital areas
Carquest Premium – Pressure Tube Assembly (Part No.37800)
from
$51.99
Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
Dorman – Suspension Control Arm (Part No.522-562)
from
$639.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
MOOG – Control Arm and Ball Joint Assembly (Part No.RK622199)
from
$198.99
MOOG premium control arms for foreign and domestic nameplates are engineered for structural strength and corrosion protection.
Product Features:
See More
Product Features:
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- HIGHLY PRECISE ENGINEERING — Optimized bushings for quiet operation and resistance to wear, salt, road grime and oils
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- INSTALLATION READY — Pre-installed ball joints with sealed sockets for maintenance-free operation
- LONG LIFE — Ball stud shape ensures fatigue life, compensating for sag and suspension and adding extra swing when you need it
- ENHANCED STRUCTURAL STRENGTH — Heat treated to match or exceed OE requirements to inhibit premature failure
- ADDED CORROSION PROTECTION — Coated studs and e-coated cast iron and steel control arms inhibit premature deterioration
Dorman – Suspension Control Arm (Part No.522-552)
from
$453.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Powercraft – Pump Seal Kit (Part No.8942)
from
$25.49
Premium-quality parts for lasting repairs. Engineered to OE design and specifications.
See More
Infiniti M35 Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Infiniti M35
You love your M35. So we’ve made it easier than ever to help you find Infiniti M35 Steering and Chassis Parts in our online catalog. Our inventory holds 72 aftermarket and OEM Steering and Chassis Parts for your Infiniti M35, ranging from $1.59 to $790.92.
We offer parts from 19 brands trusted to make quality Steering and Chassis Parts for your Infiniti M35. Before you buy, take some time to read through customer reviews. We currently have 784 reviews of Infiniti M35 Steering and Chassis Parts from previous customers. Some of the top rated parts include Suspension Control Arm with 2.0 stars and Power Steering Filter with 5.0 stars.
Find your M35 Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Infiniti M35 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Infiniti M35
Our inventory holds Steering and Chassis Parts for your Infiniti M35 from 19 trusted brands. You’ll find OEM and aftermarket parts from brands like Cardone, Moog, and Carquest Premium, all of which can keep that Infiniti happy.
We have Carquest parts available for your Infiniti M35 in categories like Power Steering Parts. Some of the top-rated Carquest parts in these categories are:
Top-Rated Cardone Steering and Chassis Parts
Leading Cardone Steering and Chassis Parts
We carry Cardone brand parts for your Infiniti M35 across several catalog categories, including Power Steering Parts. Some of our most reviewed Cardone parts include:
FAQs for Infiniti M35 Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Infiniti M35?
Out of 72 Steering and Chassis Parts for the Infiniti M35, the most popular in our inventory are:
What are the top-rated Infiniti M35 Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Infiniti M35 based on customer reviews/ratings are:
from
$188.99
(2)
Suspension Control Arm
“Ball joint was too large, had to drill out the saddle to make it fit. Couldn’t wait 3 days to get another one as the car was taken apart at my friends”
