Infiniti J30 Drivetrains
Top Infiniti J30 Drivetrains Categories
We carry over 24 Drivetrains in inventory for the Infiniti J30. If you’re looking for aftermarket Drivetrains for your Infiniti J30, check out all these categories:
Essential Infiniti J30 Drivetrains
National – Shaft Repair Sleeve (Part No.99157)
from
$37.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Royal Purple – High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart (Part No.51530)
from
$41.99
Royal Purple Motor Oil is a specially formulated multi viscocity oil for use in gasoline and diesel engines of all types from cars and trucks to SUVs, motorcycles and boats. Royal Purple(R) Motor Oil with Synerlec(R) additive technology reduces friction, which results in a 1-3 percent increase in horsepower, lowers operating temperatures, provides superior corrosion protection, improves fuel economy, reduces emissions and extends oil life. A.P.I. Certified.
Product Features:
See More
Product Features:
- Better wear protection
- Increased fuel efficiency
- Better protection of the expensive catalytic emission system
- Improved compatibility with fuels containing ethanol
- Superior corrosion protection
- Meets ILSAC GF-5 and Dexos1 performance requirements
Dorman – Drive Shaft Repair Kit – Only Fits Dorman Driveshafts (Part No.932-982)
from
$61.99
This drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft repair kit is designed to match the original hardware required to repair the drive shaft on specified vehicle
- Ideal solution – this kit is a reliable replacement for original components that have failed due to fatigue
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Multi-Purpose Bearing (Part No.A-45)
from
$57.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
FAG US – General Seal (Part No.SS2662)
from
$10.49
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
Dorman – Spindle Nut M24-1.5 Hex Size 36mm (Sold by each) (Part No.615-149)
from
$3.29
This spindle nut retainer is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut retainer matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this retainer is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
EMPI – Axle Shaft Nut (Part No.K4030150904EMP)
from
$2.97
The EMPI Axle Shaft Nut is an ideal high quality aftermarket replacement that is manufactured to meet or exceed OE specifications for fit, form, and function.
Product Features:
See More
Product Features:
- Premium aftermarket replacement
- Provides performance and dependability
- Manufactured to meet OE specifications
Dorman – Standard Spindle Nut M24-1.5 Hex Size 36 mm (Part No.615-113.1)
from
$9.99
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Dorman – Standard Spindle Nut M24-1.5 Hex Size 36mm (sold by each) (Part No.615-113)
from
$9.49
This spindle nut is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this spindle nut matches the fit and function of the factory part on specified years, makes and models
- Ideal solution – this nut is a reliable replacement for an original part that is missing or has failed due to fatigue
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Axle Diff. Seal (Part No.711070)
from
$19.99
National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Design type: spring loaded; multi-lip
- Temperature range: -20 Deg. F to 300 Deg. F / -29 Deg. C to 49 Deg. C
- Resistance to EP lubricants
- Low swell in hydrocarbon fluids
- Delivers quality and reliable performance for every type of repair
Driveworks – Camshaft Seal (Part No.S-99139)
National – Shaft Repair Sleeve (Part No.99139)
from
$39.99
National® has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.
Product Features:
See More
Product Features:
- Designed to repair damaged, grooved or worn shafts
- Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
- Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
- Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
- Easy to install with removable flange and installation tool
- Installation tool reduces sleeve distortion and allows for installation without removal from the shaft
Anchor – Center Support Bearing Motor Mount: Center, 1 Piece (Part No.8474)
from
$101.99
Center support bearings or Carrier Support Bearings are used when the driveshaft is split into two sections. It serves as a junction on the drive shaft between the transmission and the differential allowing the driveshaft to flex, relieving stress on other drive line components. Each part is engineered and designed to OE Standards. Applicable to INFINITI 90-12; NISSAN 82-04;. Please verify your application.
Product Features:
See More
Product Features:
- MAXIMUM VIBRATION DAMPENING: Rubber cushion is made of high grade rubber that ensures maximum dampening of vibration and the ability to absorb over loads.
- HEAVY GAUGE STEEL FRAME: The housing frame is made from heavy gauge steel with durability that extends the service life.
- READY TO INSTALL: Most center supports include a sealed bearing and dust shield and are ready to install.
- For Years: 1982-2012
- Weight approx: 2 Lbs
- BEARING ID / BORE: 1.1811 INCH / 30 MM
- WITH BEARING
- CUSHION INSERT ONLY
- WITHOUT FRAME
Driveworks – Drive Shaft Center Support (Part No.S-HB-6)
National – Drive Shaft Center Support Bearing (Part No.HB-6)
from
$115.99
Designed to meet or exceed OE quality, premium-quality bearings from National are manufactured to exacting standards to deliver lasting performance and extended bearing life.
Product Features:
See More
Product Features:
- BUILT TO LAST – Advanced heat treatment process for strength
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for lasting performance and extended bearing life
- RELIABLE PERFORMANCE – Element size and quantity are engineered to meet or exceed the load rating of OE bearings
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Dorman – Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter (Part No.614-003)
from
$34.99
This CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself. Made of quality components, this kit is engineered for reliable performance and durability.
Product Features:
See More
Product Features:
- Direct replacement – this CV joint boot kit contains the parts required to repair the CV joint on specified vehicles without removing the joint itself
- Ideal solution – this kit is a reliable replacement for original components that have failed due to wear
- Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
National – Multi-Purpose Bearing (Part No.30209-C)
from
$61.99
Product Features:
See More
- CONSISTENT PERFORMANCE: Matched cup and cone components ensure consistent performance
- PREMIUM MATERIALS: Precision manufactured using high-quality materials for durability and performance
- OE-STYLE DESIGN: Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on
Infiniti J30 Drivetrains Categories
Helping You Find the Right Drivetrains for Your Infiniti J30
You love your J30. So we’ve made it easier than ever to help you find Infiniti J30 Drivetrains in our online catalog. Our inventory holds 24 aftermarket and OEM Drivetrains for your Infiniti J30, ranging from $2.97 to $115.99.
We offer parts from 10 brands trusted to make quality Drivetrains for your Infiniti J30. Before you buy, take some time to read through customer reviews. We currently have 3,458 reviews of Infiniti J30 Drivetrains from previous customers. Some of the top rated parts include SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon with 4.9 stars and Standard Spindle Nut M24-1.5 Hex Size 36 mm with 4.5 stars.
Find your J30 Drivetrains here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Infiniti J30 part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Drivetrains Brands for Your Infiniti J30
Our inventory holds Drivetrains for your Infiniti J30 from 10 trusted brands. You’ll find OEM and aftermarket parts from brands like Mobil Oil, Valvoline, and Royal Purple, all of which can keep that Infiniti happy.
We have Anchor parts available for your Infiniti J30 in categories like Drive Shafts and Axles. Some of the top-rated Anchor parts in these categories are:
Top-Rated Mobil 1 Drivetrains
Leading Mobil 1 Drivetrains
We carry Mobil 1 brand parts for your Infiniti J30 across several catalog categories, including Differentials. Some of our most reviewed Mobil 1 parts include:
FAQs for Infiniti J30 Drivetrains
What are the most purchased Drivetrains for the Infiniti J30?
Out of 24 Drivetrains for the Infiniti J30, the most popular in our inventory are:
from
$41.99
(133)
High Performance 5W-30 Synthetic Engine Oil, Better Wear Protection, 5 Quart
Differential Oil
from
$14.49
(2)
DEXRON – VI ATF Full Synthetic Automatic Transmission Fluid, 1 Quart
Differential Oil
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Differential Oil
What are the top-rated Infiniti J30 Drivetrains?
Top-rated Drivetrains for your Infiniti J30 based on customer reviews/ratings are:
from
$69.99
(364)
SynPower Transmission & Differential Gear Oil: Full Synthetic 75W-140, 1 Gallon
“Happy with purchase”
from
$9.99
(21)
Standard Spindle Nut M24-1.5 Hex Size 36 mm
“Bought this product as a clutch response to a buddies needs. Worked out ABSOFUCKINLUTELY AWESOME”
from
$34.99
(18)
Uni-Fit C.V. Joint Boot Kit Outer greater than 3.58 In. Diameter
“Well built , with grease fittings. Good OEM alternative!! Recommend!!”
