Hummer H3T Steering and Chassis Parts
Top Hummer H3T Steering and Chassis Parts Categories
We carry over 48 Steering and Chassis Parts in inventory for the Hummer H3T. If you’re looking for aftermarket Steering and Chassis Parts for your Hummer H3T, check out all these categories:
Essential Hummer H3T Steering and Chassis Parts
Driveworks – Camber Bolt (Part No.DW-K100026)
from
$54.99
Camber Bolt
Edelmann – PS COOLER (Part No.58013)
from
$133.99
PS COOLER
Edelmann – Factory New Power Steering Pump (Part No.6175U)
from
$277.99
Edelmann Elite power steering pumps represent a step up in quality and performance over typical aftermarket brand power steering pumps and are built to meet or exceed OE specifications for form, fit, and function. Designed and built with 100% new components and up-to-date designs provide for a better replacement part. Each pump is painstakingly engineered to not only eliminate commonly experienced failures caused by the OE design, but also incorporates the latest OE revisions and enhancements. Every pump has a unique Designated Numeric Asset identification number etched into the part, which verifies its authenticity and corresponds to an individualized test inspection report that is included with the product to confirm its level of quality.
Product Features:
See More
Product Features:
- Every component is 100% completely new, never reused
- Each part’s unique DNA number and testing report provides confidence that the quality of your purchase is a verified fact, not just a concept
- Re-engineered designs fix traditional OE flaws and prevent premature, repeated failures. This commitment to “working out the bugs” in OE design will allow you to leave the risk of remanufactured units behind
- Includes necessary hardware where applicable (o-ring, washers, etc…)
- Pre-installed pulley and reservoir for ease and time saving install
- U.S. based A.S.E. Certified Technical Support stands ready to provide you with assistance
Rare Parts – Ball Joint (Part No.RP11966)
from
$109.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Heat treated components
- Dust seal to prevent contamination
- Restores vehicle handling
- Restores OE alignment
Dorman – Suspension Control Arm (Part No.521-949)
from
$279.99
This suspension control arm and ball joint assembly is a direct replacement for the original equipment on specific vehicle applications. An industry-leading evaluation process ensures a smooth ride, directional stability and predictable dynamics.
Product Features:
See More
Product Features:
- Trustworthy replacement – this control arm and ball joint assembly directly replaces the original assembly on specific vehicle applications
- Complete repair – each assembly includes pre-installed ball joint and bushings, saving time and labor
- Quality engineering – underwent industry-leading testing to ensure a smooth, stable and safe ride
- Durably designed – additional coatings offer long-lasting rust and corrosion resistance
Dorman – Sway Bar Bushing Bracket Kit (Part No.928-545)
from
$52.99
This suspension stabilizer bar bushing kit is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Dorman – Lower Steering Shaft (Part No.425-105)
from
$155.99
This steering shaft directly replaces the original equipment on specific vehicle applications. It is thoroughly tested to meet Federal Motor Vehicle Safety Standards, and precision-machined to ensure a tight, secure fit.
Product Features:
See More
Product Features:
- Precise fit – this steering shaft is engineered within strict tolerances to directly replace the original shaft on certain vehicle years, makes and models
- Safety tested – each design meets rigorous regulatory standards to ensure driver safety in a collision
- Trustworthy performance – built to meet thorough torsional, tensile, fatigue and other durability testing for reliable operation
- Corrosion resistant – salt spray testing and premium coating help ensure future longevity
Dorman – Propeller Shaft CV Joint Kit (Part No.932-105)
from
$173.99
This drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles, and is engineered for durability and reliable performance.
Product Features:
See More
Product Features:
- Direct replacement – this drive shaft constant velocity (CV) joint is designed to match the fit, appearance and function of the original CV joint on specified vehicles
- Restores functionality – reliable replacement for an original part that has failed due to collision damage, water infiltration or road debris contamination
- Durable construction – this part is made from quality materials to ensure reliable performance and long service life
- Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience
Carquest Premium – Power Steering Return Hose Assembly, 11mm Male Captive "O" Ring x 3/8" I.D. Hose (Part No.37502)
from
$83.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
MOOG – Alignment Caster / Camber Kit (Part No.K100159)
from
$73.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
MOOG – Alignment Caster / Camber Kit (Part No.K100026)
from
$58.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Can bring vehicles back to factory specification
- Can solve excessive tire wear and steering issues
- Shims and bushings provide precise camber, caster and toe adjustments
- Incorporates proven design and engineering features
- Cam bolts and adjustable ball joints provide alignment for non-adjustable vehicles
PWR – New Hydraulic Power Rack and Pinion (Part No.42-2721)
from
$897.99
Direct Fit – to make installation easy; All units are USA Engineering Approved; PWR Pumps, Racks, Gears & Reservoirs are 100% tested for leaks, pressure, noise and function
Product Features:
See More
Product Features:
- PWR Rack and Pinions are 100% NEW and Engineered In North America
- All PWR products are Designed, Tier-Manufactured, and Multi-Tested to meet or exceed OE Performance and Durability Requirements
- Features our EXCLUSIVE INDUSTRIAL GRADE PACKAGING, Tie Rod and Pinion Shaft Thread Protectors, Sealed Heavy Duty Plastic Enclosures, and Fluid Port Caps
- Includes: Factory Installed OE Mounting Bushings, Mounting Bracket, Inner Tie Rods, Jam Nuts (as required), Precision Routed Fluid Transfer Lines, required Installation Seals, Hardware, and Instructions
- Precision Routed and Constructed Fluid Transfer Tubes
- Manufactured to meet or exceed OE requirements
- Engineering, test, and quality validation in the USA
Cardone – Remanufactured Rack and Pinion Assembly (Part No.22-1040)
from
$468.99
CARDONE Remanufactured Rack and Pinions are re-engineered, built and tested to meet or exceed O.E. fit and performance. 100 percent new, O.E.-style O-rings and seals are installed to ensure leak-free, long-lasting performance. A final protective coating is applied and each unit is tested to guarantee a perfect fit and function.
Product Features:
See More
Product Features:
- Protective coating applied to each unit to extend the life of the unit (where applicable).
- 100 percent performance testing to ensure perfect fit, function and reliable performance.
- 100 percent hydraulic testing for proper flow, leakage and performance ensures perfect fit and function (where applicable).
- Racks are surfaced to precise specifications to prevent leaking between chambers and extend unit life.
- 100 percent new O.E.- style O-rings and lip seals ensure leak-free and long-lasting performance (where applicable).
- All new spool valve seals and rack donut seals are installed to eliminate internal leaks and ensure reliable performance (where applicable).
- Valve housings have polished micro-finish sleeves for durability (where applicable).
- As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
- Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80 percent.
MOOG – Alignment Cam Guide Pin (Sold by each) (Part No.K6716)
from
$3.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Replaces broken OEM pins
National – Bearing Race (Part No.M86610)
from
$9.99
Manufactured with premium-grade steel, National taper bearing cups feature crowned raceways to ensure even load distribution.
Product Features:
See More
Product Features:
- PREMIUM MATERIALS – Precision manufactured using premium-grade steel for outstanding durability and performance
- SMOOTH ROTATION – Crowned raceways for even load distribution
- OE-STYLE DESIGN – Engineered to meet OE specifications
- COMPREHENSIVE COVERAGE – Industry-leading coverage for domestic and import applications
- RIGOROUS TESTING – Comprehensive testing throughout design and development processes by National engineers for quality you can count on
FAG US – Cup (Part No.M802011)
from
$16.49
Our wheel seals are engineered using only the highest-quality materials to meet vehicle manufacturer specificatons. We work with suppliers to design seals that meet FAG’s quality standards. Seals are designed to protect wheel end components from contamination – such as dirt, dust, and moisture – and prevent the loss of grease over the life of the bearing. The specifications for wheel seals are very demanding, and the type required depends on the specific application, position and vehicle class.
Product Features:
See More
Product Features:
- High-precision and High-quality components used in all KITs
- Coverage of classic and new high-tech solutions for the best system coverage
MOOG – Suspension Stabilizer Bar Link (Part No.K750185)
from
$47.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Improves upon OE designs
- Quiet, dependable operation
- Provides like-new steering, ease of installation and longer life
- Incorporates proven design and engineering features
- Greaseable socket reduces corrosion and wear by allowing new lubricant to flush contaminants
Rare Parts – Sway Bar Link (Part No.RP15971)
from
$92.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Rubber or Thermoplastic material
- No Squeak
- Restores vehicle handling
- Improves body roll
Carquest Premium – Power Steering Pressure Hose Assembly, 12mm Male Captive "O" Ring x 16mm Male "O" Ring (Part No.37501)
from
$72.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
See More
Carquest Premium – Power Steering Pressure & Return, 12mm Male Captive "O" Ring x 16mm Male "O" Ring & 11mm Male "O" Ring x 3/8" I.D. (Part No.40317)
from
$152.99
Our power steering pressure and return hoses are accurately designed and constructed to match or exceed the original equipment (OE) specifications, guaranteeing a precise and long-lasting installation. With a focus on duplicating the exact routing of the OE hoses, every bend is carefully executed to follow the original hose’s trajectory to ensure a seamless fit into the allotted space. Manufactured with quality materials and incorporating essential safety features, our hoses provide excellent protection against premature failure. Each hose is engineered to withstand the intense pressure pulsations and heat typically encountered in steering systems, offering exceptional resistance to breakdown and system contamination.
Product Features:
See More
Product Features:
- Double lock beading with barbed tube end provides superior hose/coupling integrity
- Zinc coated tubes protect against rust and corrosion
- Heat/abrasion tubing protects vital areas
Edelmann – Elite Power Steering Filter; Fits 99% of Hydraulic Power Steering vehicles (Part No.70699)
from
$34.99
Product Features:
See More
- Interchangeable end sizes allow the filter to fit virtually any hose size and vehicle
- Small size provides an easy fit, even in cramped systems
- Dual filtration technology eliminates metal and non-metal debris, ensuring a cleaner system
- Filter can be easily serviced, extending its functional lifespan considerably
Cardone – Power Steering Filter (Part No.20-0012F)
from
$47.49
CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.
Product Features:
See More
Product Features:
- In-line filter with serviceable filter element
- Patented built-in bypass that filters up to 190 micron particles
- Designed to extend the life of the steering system
- Sure-grip barb connections are included to ensure proper hose fitment
Rare Parts – Tie Rod End (Part No.RP29041)
from
$94.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
Rare Parts – Tie Rod End (Part No.RP29088)
from
$139.99
This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.
Product Features:
See More
Product Features:
- Restores vehicle handling
- Restores OE alignment
- Reduces tire wear
- Improves steering response
MOOG – Steering Tie Rod End (Part No.ES800762)
from
$84.99
Backed by superior materials and rigorous testing, MOOG® outer tie rod ends deliver reliable performance you can count on. MOOG problem-solving innovations ensure fast, hassle-free installation.
Product Features:
See More
Product Features:
- RESTORES LIKE-NEW STEERING — Patented pressed-in cover plate seals out debris and minimizes looseness, reducing bearing wear and promoting longer life
- GREASEABLE SOCKET — Reduces corrosion and wear by allowing new lubricant to flush contaminants
- ABSORBS IMPACT — Belleville preload washer helps keep the bearing package tight as bearings wear
- PROBLEM SOLVER« GUSHER BEARING — Metal-to-metal design provides strength and allows grease to flow through bearing surface for reduced friction and long life
- STRONG AND DURABLE — Ball studs are heat treated to match or exceed OE requirements to inhibit premature failure and improve fatigue strength
- EASY TO INSTALL — Precision tolerances for easy installation and steering alignment giving you a perfect fit right out of the box
- COMPREHENSIVE COVERAGE — Available for foreign and domestic nameplates
- RIGOROUS TESTING — Comprehensive testing throughout design and development processes by MOOG engineers for quality you can count on
Hummer H3T Steering and Chassis Parts Categories
Helping You Find the Right Steering and Chassis Parts for Your Hummer H3T
You love your H3T. So we’ve made it easier than ever to help you find Hummer H3T Steering and Chassis Parts in our online catalog. Our inventory holds 48 aftermarket and OEM Steering and Chassis Parts for your Hummer H3T, ranging from $3.29 to $897.99.
We offer parts from 11 brands trusted to make quality Steering and Chassis Parts for your Hummer H3T. Before you buy, take some time to read through customer reviews. We currently have 396 reviews of Hummer H3T Steering and Chassis Parts from previous customers. Some of the top rated parts include 3/8" I.D. Return Hose CPE with 4.4 stars and Alignment Caster / Camber Kit with 5.0 stars.
Find your H3T Steering and Chassis Parts here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your Hummer H3T part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Steering and Chassis Parts Brands for Your Hummer H3T
Our inventory holds Steering and Chassis Parts for your Hummer H3T from 11 trusted brands. You’ll find OEM and aftermarket parts from brands like Moog, Cardone, and Carquest Premium, all of which can keep that Hummer happy.
We have Driveworks parts available for your Hummer H3T in categories like Alignment Kits. Some of the top-rated Driveworks parts in these categories are:
Top-Rated Cardone Steering and Chassis Parts
Leading Cardone Steering and Chassis Parts
We carry Cardone brand parts for your Hummer H3T across several catalog categories, including Power Steering Parts. Some of our most reviewed Cardone parts include:
FAQs for Hummer H3T Steering and Chassis Parts
What are the most purchased Steering and Chassis Parts for the Hummer H3T?
Out of 48 Steering and Chassis Parts for the Hummer H3T, the most popular in our inventory are:
from
$3.99
This product is not rated
Alignment Cam Guide Pin (Sold by each)
Alignment Cam Guide Pins
What are the top-rated Hummer H3T Steering and Chassis Parts?
Top-rated Steering and Chassis Parts for your Hummer H3T based on customer reviews/ratings are:
from
$73.99
(1)
Alignment Caster / Camber Kit
“I like these better than factory mainly because the bolts have grease fittings. If the OEM bolts would have had this, I wouldn’t have snapped them du”
