Honda Element Power Steering Parts

Our products are engineered and tested to provide years of trouble free operation. Backed by over 50 years of mobile a/c experience, fix it once and fix it right with Imperial.

Product Features:

• Transmission oil cooler hose
• 11/32″ x 4-1/2′
• Designed for transmission fluid applications
• Made for tight-radius applications found in transmission cooler installations
• Compatible with 11/32 in. OEM cooler systems
• Tube made of black chemigum (nitrile)
• Reinforced with 2-spiral synthetic
• Covered in black Hypalon
• Compatible with 11/32 in. OEM cooler systems
• Tube made of black chemigum (nitrile)
• Reinforced with 2-spiral synthetic
• Covered in black Hypalon

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

• Zinc coated tubes protect against rust and corrosion

CARDONE Remanufactured Power Steering Pumps are engineered to meet or exceed O.E. performance. Original designs are scrutinized for potential improvement, and where applicable, design upgrades are implemented to produce a more durable part than the original. All critical components are tested to ensure proper function. Every unit undergoes a hydraulic efficiency test to ensure reliable, long-lasting performance.

Product Features:

• All critical components (cam packs, spool valves, etc.) are triple-tested to ensure product reliability.
• All units are built with 100% new O-rings and premium-grade HNBR seals to prevent leaks. HNBR does not break down at high temperatures like conventional seal material.
• Shafts are surfaced to precise specifications to eliminate premature seal wear and extend pump life.
• Units are supplied with 100% tested and calibrated pressure relief valves.
• Final pump assembly is computer-tested to measure pressure, bypass, fluid flow, valve operation, steering effort and noise to ensure reliable performance.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.
• Our remanufacturing process is earth-friendly, as it reduces the energy and raw material needed to make a new part by 80%.

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

This OE quality power steering hose is the perfect replacement hose to meet the high demands placed on systems like power steering. Rein automotive products provide you with the proper fit, form and function for European vehicles. With fitments for some of the world’s finest automobiles, including Audi, BMW, Mercedes Benz, Mini, Porsche, Saab, Volkswagen, and Volvo all Rein Automotive genuine replacement parts are guaranteed original manufacturer quality. Every part is manufactured with top quality materials to ensure it has the same tolerances as the part that came on the car to provide ease of installation and long lasting durability.

Product Features:

• Original Equipment fit, form and function
• Manufactured from premium raw materials
• Premium OE design
• Right fit the first time
• For European vehicles

Rein OE Quality power steering high pressure feed hose assemblies are designed to save valuable labor time. During the manufacturing process, each high pressure feed assembly undergoes rigorous testing of its tensile strength, burst pressure, low temperature flexibility, impulse, and corrosion resistance to exceed industry standards. Rein high pressure hose assemblies are built with SAE J188 compliant rubber compound hose with an internal noise absorber, not included by most competitors, along with protective jacket(s) and or heat sleeve(s). The SAE J526 compliant tubing sections of the assemblies, along with their end fittings, are made of heavy duty carbon steel which are either resin, zinc or zinc plus powder coated for rust resistance. Tying the individual sections together are coated hose crimp ends, pre assembled brackets which eliminate the need for special tools, sealing hardware, and a pressure switch port all as specified by the OE manufacturer.

Product Features:

• A direct fit, replacement hose and line assembly
• SAE J188 compliant high pressure rubber compound hose with internal noise absorber
• SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
• Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
• Pre attached protective jacket(s) and heat sleeve(s), where required

Restore a leaking power steering system with this power steering pump O-ring repair kit. Replacing original seals that have dry-rotted or deteriorated with age, these direct-replacement O-rings eliminate leaks.

Product Features:

• Exact match – these replacement steering pump O-rings are a direct replacement for worn, dry-rotted original equipment components
• Durable construction – manufactured from quality materials for a long service life
• Saves money – original equipment quality at a lower price
• Quality tested – has undergone testing to ensure proper fit and performance

Expertly remanufactured to rigorous quality and performance standards, CARDONE Electronic Power Steering Rack and Pinions are equipped with brand-new, premium components to guarantee exceptional longevity and reliability. Each unit undergoes CARDONE’s Factory Test Drive, simulating extreme operating conditions while verifying all on-car communications. All rubber sealing components are replaced, and a specialized lubricant is applied to drastically increase longevity.

Product Features:

• 100% replacement of rubber sealing components.
• Application of specialized lubricant(s) for extended life.
• Finished in protective coating to prevent corrosion and rust.
• Each unit undergoes a factory test drive, simulating extreme operating conditions while verifying all on-car communications.
• As a remanufactured Original Equipment part, this unit guarantees a perfect vehicle fit.

Maval Manufacturing is a Global leader in the production of remanufactured steering racks that meet or exceed the OE requirements set by the vehicle manufacturers. Maval uses only the highest quality OE parts in the remanufacturing process and each unit goes through a comprehensive inspection process that must meet OE performance specifications.

Product Features:

• OE quality and direct fit replacement
• Remanufacture based on highest quality standards
• Computerized tests insure that all products meet the OE performance specification.
• Performance and quality approvals from OE steering gear and pump manufacturers world wide

This power steering pump pulley is designed to match the fit and function of the original pulley on specified applications. Made of quality materials, it is engineered for reliable performance and durability.

Product Features:

• Direct replacement – this power steering pump pulley is designed to match the fit and function of the original pulley on specified applications
• Restores functionality – reliable replacement for an original pulley that has failed due to contamination by road debris, or damaged during service
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

Power Steering Pumps are often misdiagnosed as the culprit for noise or lack of pressure, when the actual cause is a clogged remote reservoir. CARDONE New Power Steering Reservoirs offer the option of a stand-alone replacement as well as a complement to a full power steering pump replacement. Each unit strictly follows the O.E. design, includes a reservoir cap and is 100% tested to ensure proper fit and function.

Product Features:

• 100% testing ensures leak-free performance
• Designed to match O.E. fit, function and performance
• Manufactured from O.E. grade material for strength and durability
• Resistant to cracking caused by the high temperatures in the engine compartment
• Reservoirs with integrated filter have the same filtration efficiency as O.E.

Although no plastic fluid reservoir is completely immune to the conditions that cause cracking, some are less susceptible than others. Dorman uses tough blow-molded plastic for Dorman’s Power Steering Reservoir, steeling it against coolant corrosion, fluid freezing, or exposure to extreme under hood heat.

Product Features:

• Includes reservoir cap and level sensor (where applicable)
• Direct replacement for a proper fit every time
• Weather-resistant
• Rigorous quality control measures have been undertaken to ensure that this part conforms to product standards

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

CARDONE Steering Filters are uniquely designed to protect the steering system from damaging contaminates, which impacts performance and leads to premature power steering pump failure. These compact filters are easy to install, provide magnetic filtration, can be serviced in-line and are highly recommended to extend the life of your steering system. Available in 3/8″, 1/2″, and 5/8″ sizes to cover a most vehicle applications.

Product Features:

• In-line filter with serviceable filter element
• Patented built-in bypass that filters up to 190 micron particles
• Designed to extend the life of the steering system
• Sure-grip barb connections are included to ensure proper hose fitment

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Premium-quality parts for lasting repairs. Engineered to OE design and specifications.

Power Steering Molded Return Hose

P/S Return Hose

Power steering pressure & return hoses are engineered to OE design and specifications, ensuring an accurate and lasting installation. Duplication of OE routing, constructed with high quality materials and use of safety features protects against premature failure.

Product Features:

• Zinc coated tubes protect against rust and corrosion