from

$43.24

The ISG shock mount plate is OE Quality and is manufactured using only the highest quality materials and is designed to dampen noise and vibration.

Product Features:

OE-Equivalent and direct fit application
OE style mounts and fasteners
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$103.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

100% Load tested
Easy to install
Provides like-new steering
Designed to lower stresses for longer service life
Worn or sagging coil springs can cause premature tire wear due to vehicle misalignment

from

$708.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution

from

$29.99

Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.

Product Features:

REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts

from

$14.99

This high quality chassis part will improve overall vehicle handling, reduce tire wear and increase the life of other steering and suspension components. These chassis parts are manufactured to meet or exceed OEM.

Product Features:

Rubber or Heat Treated bushings
No Squeak
Reduces vibration

from

$39.99

This suspension trailing arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$19.69

Coil Spring Insulato

from

$39.49

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$138.64

The KYB Excel-G OE-equivalent direct fit Strut Assembly is engineered to restore the vehicle’s originally designed handling and control. The Excel-G Shocks are calibrated to compensate for worn suspensions and is a great choice to restore OE performance and original driving conditions. Patented valving plus pressurized nitrogen gas account for riding comfort and, at the same time, dramatically reduce the aeration or foaming that commonly occur in shock absorber and cause its performance to start fading, even after only a few minutes in operation.

Product Features:

Restores OE performance
One way anti-foaming valve reduces foaming and performance fade
Three stage dual valving
Teflon coated piston valve
Seamless inner cylinder and eye ring, no leaks
Bonded bushings and sleeves
Hard chromed piston rod

from

$14.49

Coil Spring Insulato

from

$64.99

As part of the Vehicle Stability System multiple sensor inputs are required for the processor to perform the brake control operation to maintain vehicle skid control and vehicle stability control. The Power Steering Speed Sensor provides the processor the needed steering position and rotational speed input required for proper braking operation.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$29.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

Long-lasting performance
Restores like-new steering and handling
Engineered to meet or exceed OE requirements
Construction and design validated by MOOG engineers
Incorporates proven design and engineering features

from

$20.99

This replacement shock mount is designed to directly replace the mount that comes stock on specified vehicle years, makes and models. It is precisely reverse-engineered to ensure original equipment quality, fit and durability.

Product Features:

Direct replacement – this shock mount is precision-engineered to match the fit and durability of the original shock mount on specific vehicles
Complete kit – all necessary mounting hardware is included with each mount
Trustworthy construction – engineered in North America and backed by 100 years of automotive aftermarket experience
Proactive repair – it’s often smart to replace shock mounts when replacing worn out shocks

from

$149.99

Carquest Premium complete strut assemblies are manufactured by a leading original equipment supplier (O.E.S.) for a perfect OE fit, form and function. Carquest Premium strut assemblies are pre-assembled units that make your ride control repair faster and easier with no special tools needed for installation. Our complete strut assemblies or loaded struts are rigorously tested for proven reliability and offer an industry-leading warranty.

Product Features:

Nuts and Bolt: SAE Standard Grade
Bump Stop: Developed from urethane rubber for extended life. Absorbs road impact and prevents other component damage for smoother drive. ( Where applicable)
Coil Spring: Manufactured with high quality grade carbon steel, heat treated, stress relieved, fully cycled and salt-spray tested for a professional performance.
Spring Isolator: Prevents metal to metal contact and acts to help prevent noise between the spring and spring seat. ( Where applicable)
Outer Tube: Long-lasting corrosion and rust protection.
Piston Rod: Well-finished chromed piston rod ensures proper seal lubrication, consistent wear surface, and inhibits corrosion. The resistance is superior to commercial standards and quality meets OE requirements.
Top Mount: Premium Quality rubber-steel assembly, fully tested for long durability.
Bearing: OEM Quality bearing, designed with low starting torque to ensure smooth steering, tested under extreme load conditions to ensure optimal performance and long life. ( Where applicable)
Oil Seal: Premium Double- Lip NOK seal, fabricated with high quality rubber.
Overall Features & Benefits: Pre-assembled strut saves time and money on installation. Application tuned technology for smoother, safer and more stable ride. No special equipment or special parts needed for installation.

from

$59.99

This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.

Product Features:

Direct replacement – fits and performs like the original equipment on specific vehicles.
Reliable fit – precision-engineered to match the design and dimensions of original components.
Durable construction – manufactured to strict standards using sturdy, safe materials
Rigorously tested – thorough quality control measures ensure longevity

from

$92.99

By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.

Product Features:

High polish chrome steel bearing races
Replacement helps restore vehicle handling
Superior rubber to steel bonding for durability
Engineered to meet or exceed OE requirements
Provides like-new steering, ease of installation and longer life
Incorporates proven design and engineering features

from

$29.99

Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.

Product Features:

Made from HYPER-Flex Polyurethane
Gives Shock Maximum Efficiency
Add to the Performance of Every Shock
Gives Instant Response/Control to Suspension

from

$159.99

Quick Strut Kit

from

$30.49

The Dorman Suspension Control Arm Bolt Kit includes all necessary components to secure the control arm to the vehicles chassis system. The bolts and hardware available in this repair kit are made from high-quality materials and designed to provide a longer service life.

Product Features:

Direct replacement for a proper fit every time.
Durable steel construction for a longer service life
Secures suspension to vehicle frame
Manufactured to strict engineering quality standards

from

$36.49

Valvoline MaxLife Multi-Vehicle Automatic Transmission Fluid (ATF) is a full-synthetic formulation with advanced additives to prevent the major causes of transmission breakdown and help extend transmission life. Developed to help prevent leaks, maximize transmission performance, reduce transmission wear, and maintain smooth shifting longer than conventional fluids. It is suitable for use in a broad range of ATF applications including most Ford, GM, Toyota, Honda, Nissan, Hyundai, BMW, Mercedes, Volvo, VW & Audi.

Product Features:

Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
Long life friction modifiers help improve smooth shifting, eliminate slippage and shudder, prevent clutch wear and improve drivability longer than conventional fluids
High-performance seal conditioners maintain and preserve the elasticity of seals to help prevent leaks in high mileage transmissions
Developed with anti-wear technology to help improve transmission durability
Advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
Suitable for 95% of traditional ATFs including Dex/Merc, Mercon LV & Mercon V

from

$32.14

The KYB shock mounting kit is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.

Product Features:

OE-Equivalent and direct fit application
Reduces squeaks, rattles, and vibration noise
Resistant to oil and other contaminants
Meets or exceeds OEM specifications

from

$234.99

Product Features:

Incredible Improvement in Control
Maintains Proper Caster and Camber Alignment
Increase in Handling and Control
Greatly Reduce Wheel Hop on Quick Acceleration
Even Braking Control is Improved
Better Suspension Stability

from

$995.99

The ultimate entry level suspension upgrade! Performance, handling and comfort make up the Grip Series Stage 1 kit featuring Whiteline signature front and rear adjustable (where applicable) sway bars, drop links and performance lowering springs.

Product Features:

By eliminating flex associated with original equipment, these high strength links are engineered to improve overall performance, increased rigidity and responsiveness which can be felt especially during lane changes and initial turn.
The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.

from

$15.05

The Intermotor brand has built its reputation by engineering and distributing a full line of genuine import parts – parts that are unrivaled for quality, original look, fit, form & function, as well as coverage.

Product Features:

Points meet or exceed the original for OE plus performance.
Featuring brass or copper contacts where specified for extended wear
All parts are manufactured to stringent quality requirements. Our plants are TS16949 and ISO9001 certified which ensures that every part is the right part for the right vehicle.
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product