1988 Honda Civic Suspension Parts
More 1988 Honda Civic Suspension Parts Categories
If you’re looking for an original Suspension Parts replacement for a 1988 Honda Civic, you can search through our selection below. You’ll also find aftermarket and OEM Suspension Parts to meet your needs.
Essential 1988 Honda Civic Suspension Parts
KYB – Strut Eyelet Bushing (Part No.SM5404)
from
$16.79
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
Whiteline – Trailing Arm Centre Pivot Bushings – Grease Free, Superior Performance (Part No.W63452G)
from
$52.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your trailing arm centre pivot bushings have failed. Whiteline’s centre pivot bushings not only boasts the latest in bushing material technology but a high performing PTFE inner lining boasting an extraordinary low coefficient of friction. This inner lining eliminates the need to lubricate the bushing on installation and therefore makes these bushing ‘grease free’! Replace these worn parts with Whiteline bushings ensuring superior elasticity, memory and outright durability that offer a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- PTFE lining provides an extraordinary low coefficient of friction eliminating the need to lubricate the bushing.
- Install guide included providing detailed instructions on how to install your new Whiteline purchase.
Dorman – Suspension Control Arm (Part No.520-566)
from
$71.99
This suspension control arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Strut Mount (Part No.K90648)
from
$97.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Engineered to meet or exceed OE requirements
- Superior rubber to steel bonding for durability
- High polish chrome steel bearing races
- Replacement helps restore vehicle handling
- Includes new spring seat insulator and installation hardware to eliminate noise issues
- Electroplate and corrosion-resistant coating to help prevent galvanic corrosion
KYB – Knuckle Shock Bushing (Part No.SM5051)
from
$11.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
KYB – Bellows Bump Stop Kit (Part No.L3037655149KYB)
from
$16.85
Introducing KYB’s superior quality Bump Stop/Bellows Kits for today’s consumer. The KYB Bump Stop/Bellows Kit provides the most effective protection program to ensure the longevity of your struts. The KYB Bellows / Dust Boot protects the piston rod from damage caused by debris (i.e. rocks, dust, dirt and stones), thus preventing premature strut failure. The kit consists of the following components: Bump Stop, Bellows Boot, Securing Ring and Cable Tie for secure mounting of your KYB protection kit.
Product Features:
See More
Product Features:
- Made from premium quality cellular polyurethane
- The KYB Bump Stop Kit prevents the bottoming out of struts; ensuring a high level of protection and a longer strut life
- KYB Bump Stop Kits suit a variety of vehicle applications
- KYB Bump Stop Kits perfectly compliment KYB Struts
KYB – KYB Shock Mounting Kit (Part No.L4049177577KYB)
from
$23.85
The KYB shock mounting kit is OE Quality and is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Suncore – Complete Strut Assem (Part No.55S11542)
from
$69.99
Complete Strut Assem
Valvoline – DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart (Part No.798153)
from
$11.99
Valvoline DEX/MERC ATF is a high-quality transmission fluid formulated to meet the challenging demands many automatic transmissions. Its responsive low-temperature fluidity is beneficial in both electronic and hydraulic controlled transmissions and transaxles. Recommended for use in the following applications: MERCON®, DEXRON®-III, Ford M2C138-CJ and M2C166-H, Allison C-4 and TES-389, and Caterpillar TO-2.
Product Features:
See More
Product Features:
- Formulated with premium base stocks and advanced additive technology to meet the challenging demands of automatic transmissions.
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
KYB – Strut Mount and Bearing (Part No.SM5817)
from
$64.99
KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.
Product Features:
See More
Product Features:
- The Highest Quality Replacement Strut Mount Available
- Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
- Superior Rubber Reduces Noise, Vibration And Harshness
- Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
- Matched Grade Studs And Nuts
Pilot – Rear Strut Power Bar (Part No.PM-402S)
from
$54.99
Remove chassis flex for better handling. Made of the highest quality materials. Offered in different finishes to dress up the engine compartment.
See More
DC Sports – Rear Carbon Steel Strut Bar – Fits 88-00 Civic/CRX/Del/94-01 Int. (Part No.CSB2310)
from
$137.99
Single or Dual bar design with integrated steel brace virtually eliminates body flex for improved handling and drivability. Solid one piece design for maximum rigidity. Reduces chassis flex and improves torsion stiffness. Improves vehicle handling and drivability characteristics. Mounts directly to strut tower with little or no modifications required. Includes comprehensive instructions and all necessary hardware. Titanium grey powder coating delivers lasting good looks. Available for upper front and or rear.
Product Features:
See More
Product Features:
- CS-2 dual bar design
- Mounts directly with no modifications required
- Includes instructions and all necessary hardware
- Titanium-look grey powder coat delivers lasting good looks
- Stiffens chassis and improves vehicle handling
- Maximum rigidity to increase vehicle handling
Energy Suspension – Hyper-Flex System (Part No.16.18101R)
from
$143.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Energy Suspension – Hyper-Flex System (Part No.16.18109G)
from
$256.99
Product Features:
See More
- Incredible Improvement in Control
- Maintains Proper Caster and Camber Alignment
- Increase in Handling and Control
- Greatly Reduce Wheel Hop on Quick Acceleration
- Even Braking Control is Improved
- Better Suspension Stability
Dorman – Suspension Trailing Arm Bushing (Part No.905-750)
from
$48.49
This suspension trailing arm bushing is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Trailing Arm Bushing (Part No.K80668)
from
$57.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Engineered to meet or exceed OE requirements
- Construction and design validated by MOOG engineers
- Incorporates proven design and engineering features
KYB – KYB Shock Bushing (Part No.L404035005KYB)
from
$15.69
The KYB shock bushing is OE Quality and is manufactured using only the highest quality materials and is designed to reduce noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and direct fit application
- Reduces squeaks, rattles, and vibration noise
- Resistant to oil and other contaminants
- Meets or exceeds OEM specifications
Energy Suspension – Shock Bushing Set (Part No.16.8103R)
from
$29.99
Adds performance to any shock. Benefit from better durability over O.E.M. rubber bushings. Important to use for competition of any kind. Great for show vehicles – adds that finishing touch. Made of Energy’s Hyper-Flex performance polyurethane.
Product Features:
See More
Product Features:
- Made from HYPER-Flex Polyurethane
- Gives Shock Maximum Efficiency
- Add to the Performance of Every Shock
- Gives Instant Response/Control to Suspension
Carquest Premium – A/C Compressor Relay Connector (Part No.PTC1099)
from
$52.99
CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.
Product Features:
See More
Product Features:
- Premium quality materials for longer service life
- Sealed connections (where applicable) to prevent environmental corrosion and performance issues
- Global coverage for import and/or domestic applications
- OE specified wire gauge to ensure a reliable electrical connection
- Designed to meet or exceed OE specifications in form, fit and function
Dorman – Lateral Arm (Part No.521-697)
from
$74.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
MOOG – Control Arm (Part No.K90351)
from
$94.99
MOOG® Problem Solver® (CK) control arms incorporate proven design and engineering features to ensure like new steering ease of installation and longer life. MOOG is the preferred choice of professional technicians and NASCAR crew chiefs.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- OE fit and form geometry and alignment
- Construction and design validated by MOOG engineers
- Broad coverage for foreign and domestic applications
Dorman – Suspension Control Arm (Part No.520-536)
from
$47.99
This lateral arm is precision-engineered and rigorously tested to provide reliable replacement for the original equipment on specific vehicles.
Product Features:
See More
Product Features:
- Direct replacement – fits and performs like the original equipment on specific vehicles
- Reliable fit – precision-engineered to match the design and dimensions of original components
- Durable construction – manufactured to strict standards using sturdy, safe materials
- Rigorously tested – thorough quality control measures ensure longevity
Whiteline – Control Arm Lower Rear Inner And Outer Bushing (Part No.W62005)
from
$66.99
Suffering uneven tyre wear, unbalanced braking or a less predictable rear end while cornering. It could be your control arm bushings have failed. Replace these worn parts with Whiteline synthetic elastomer bushings that offer long lasting durability for a safer more predictable vehicle.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Whiteline’s latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
- Internal grease reservoirs provide continual self lubrication for optimum friction management.
Whiteline – Anti-Lift Kit (Part No.KCA467)
from
$334.99
Whiteline Anti Lift Kits are primarily designed to improve traction and cornering grip under power. Increasing static caster to both front wheels. The special low compliance bushings reduce caster wind-back and maintain tighter tolerances between static and dynamic alignment settings. The additional caster coupled with the firmer bushings serve to dramatically sharpen initial turn-in response – forcing more consistent alignment angles through the corner due to the reduced bush compliance.
Product Features:
See More
Product Features:
- Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
- Featuring anti geometry that works to aid traction by allowing the wheel to track the ground more precisely resulting in superior traction under power including cornering and dramatically reducing understeer and front wheel spin.
- Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
Nishino – Control Arm Bushing (Part No.L2030144865NSO)
from
$15.89
The Nishino Control Arm Bushing is manufactured using only the highest quality materials and is designed to reduce road noise and vibration.
Product Features:
See More
Product Features:
- OE-Equivalent and a direct fit application.
- Meets or exceeds the OE specifications.
- Designed to reduce vibration and absorb noise.
KYB – Jounce Bumper and Bellows (Part No.SB108)
from
$35.99
KYB Strut Boot Kits keep your struts protected from dirt, dust, sand, salt and other road debris. These harmful elements cause abrasive wear to the polished shaft, upper seal and bushing. KYB Strut Boot Kits prevent these contaminants from entering the strut by covering the entire strut shaft in a highly durable plastic bellows. This can easily extend the life of the strut. The KYB Strut Boot Kit includes a poly foam travel-limiting bumper. Its designed to protect the strut from bottoming out and protects other components from extreme movement damage.
Product Features:
See More
Product Features:
- Superior Quality Boot Helps Protect The Strut Shaft From Leak-Causing Dirt And Debris
- Poly Foam Bumper Prevents The Strut From Bottoming Out
- Built With Design And Quality That Matches Or Exceeds One
- Protects The Upper Seal And Bushing
MOOG – Strut Bellows (Part No.K90467)
from
$36.99
By constantly introducing design enhancements that extend product life and simplify installation and replacement, MOOG has earned its reputation as the chassis industry’s Problem Solver.
Product Features:
See More
Product Features:
- Easy to install
- Restores like-new steering and handling
- Construction and design validated by MOOG engineers
- Engineered to meet or exceed OE requirements
- Incorporates proven design and engineering features
Monroe – Strut-Mate Strut Boot Kit (Part No.63633)
from
$29.99
Designed to protect the strut, the Monroe® Strut-Mate® Boot Kit is the perfect replacement for a damaged jounce bumper or boot. Heavy-duty construction and unique design features make it the ideal choice for maximum rod protection and improved strut life.
Product Features:
See More
Product Features:
- REPLACES DAMAGED JOUNCE BUMPER OR BOOT — Avoid premature strut failure by replacing missing or damaged strut components
- PROTECTS PISTON ROD — Protects piston rod finish from rust and corrosion and helps reduce oil leakage
- KEEPS MOISTURE AND DIRT OUT — Self-draining design eliminates retention of moisture and other unwanted debris
- ENHANCES STRUT LIFE — Delivers protection from severe suspension movement to improve strut durability
- PERFECT PAIRING — Ideal match to protect strut rods, replace all worn strut components with quality Monroe struts (sold separately) for a complete four-corner ride control upgrade
- EASY TO INSTALL — Direct fit OE replacement with firm friction connection that helps keep the boot in place
- BUILT TO LAST — Soft-entry jounce bumper made of closed cell, micro-cellular urethane for maximum durability and to help reduce severe impacts
Popular 1988 Honda Civic Suspension Parts Categories
1988 Honda Civic Suspension Parts
You count on your 1988 Honda Civic to run right. That means taking care of it with regular maintenance, necessary repairs, and the right parts. Advance Auto Parts can help with all of that thanks to our extensive inventory of trusted Suspension Parts. With 50 Suspension Parts ranging in price from $6.29 to $285.99, you’re sure to find everything you need for your 1988 Honda Civic.
Brands matter. If you want to shop a specific Suspension Parts brand, we stock 15 different brands like Valvoline, Monroe, and Moog. 1988 Honda Civic Suspension Parts start as low as $6.29!
One of the best ways to find top quality OEM or aftermarket Suspension Parts is by asking professionals. Short of that, you can shop with confidence thanks to our 137 extensive product reviews on 1988 Honda Civic Suspension Parts. Some of the top-rated Suspension Parts products we carry are Shock / Strut Mount Kit with 4.3 stars and Suspension Trailing Arm Bushing with 1.5 stars.
Did we mention you can order your Suspension Parts from our online catalog and have them shipped right to your garage? Or, if you feel like seeing the parts first-hand, search for your nearest Advance Auto Parts location above and pick up in-store when you’re ready. Browse our full Suspension Parts inventory for your 1988 Honda Civic below to get started!
Top-Rated Suspension Parts Brands For Your 1988 Honda Civic
Trusted Suspension Parts OEM and aftermarket product brands are what Advance Auto Parts specializes in. The brands we work with are sure to keep that 1988 Honda Civic running right for years to come. In our inventory you’ll find brands like Valvoline, Monroe, Moog, and even more.
Popular Driveworks Suspension Parts
You’ll find popular Driveworks brand products across Control Arms and Trailing Arms. All are waiting to get your 1988 Honda Civic back on the road. Some of the top-rated Driveworks products in these categories are:
Top-Rated Suspension Parts
If are what you’re looking for, our inventory holds plenty. We stock brand Suspension Parts for your 1988 Honda Civic, and some of our most reviewed parts include:
FAQs for 1988 Honda Civic Suspension Parts
What are the most purchased Suspension Parts for the 1988 Honda Civic?
Out of 50 Suspension Parts for the 1988 Honda Civic, the most popular in our inventory are:
from
$11.99
This product is not rated
DEX/MERC ATF Conventional Automatic Transmission Fluid, 1 Quart
Suspension Self-Leveling Unit Fluids
What are the top-rated 1988 Honda Civic Suspension Parts?
Top-rated Suspension Parts for your 1988 Honda Civic based on customer reviews/ratings are:
from
$23.99
(3)
Shock / Strut Mount Kit
“this is 2 washers, 1 cheap metal spacer, and 2 rubber bushings. Was, I think, 12.99 but I had a coupon. These used to be included with shocks years ag”
from
$54.99
(2)
Suspension Trailing Arm Bushing
“Needs installation instruction sheet. Must be pressed in. Described as easy to install. May as well buy the standard part as it is much less expensi”
