GMC Yukon XL 2500 Air Suspension and Kits

This extended-life front-end kit includes all the components required to repair both the left and right side of the suspension. Featuring premium designs, this application-specific kit is engineered to restore factory-like feel and performance.

Skyjacker(R) suspension leveling kits are just what you need to get your truck or suv riding level again. They feature specially designed spacers to give you the additional lift necessary to make your vehicle stance level. Available for either the front or rear, these skyjacker suspension leveling kits are an excellent choice to lift your truck or suv.

Suncore’s 151G-01-20-KIT is a passive replacement for the rear air shocks in your Z55 Autoride equipped vehicle. These air shocks include a built in bypass for the dash warnings and work as a less expensive alternative to replacing the original air shock absorbers. Included in this kit is a brand new air compressor pump, so you can keep the load leveling feature in your SUV without losing hundreds to costly OEM parts. If you see Stabilitrac, TCS or ABS warnings on the dash after install, reconnect the blue sensor located up on the right side of the frame rail, near the top shock bolt behind the bump stop.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Suncore’s Air Compressor and Dryer Assembly is precision engineered to meet the performance and installation fit of the OEM suspension air compressor found in your Z55 Autoride. The air compressor directly plugs into the current air lines and electronic controls and even has a replacement plug in case yours is damaged or worn. A pressure transducer is also built in, allowing your air suspension to monitor and solve unbalanced air springs.

Fully synthetic leading edge, high-performance automatic transmission fluid. Developed to meet the severe requirements of modern multi-speed transmissions designed with 6 or more gears.

Valvoline Import Multi-Vehicle ATF is the full-synthetic automatic transmission fluid that has been specially engineered to meet and exceed the requirements of most imports and domestics with automatic transmissions. Formulated with advanced additives to prevent the major causes of transmission breakdown, it€™s designed to help prevent leaks, reduce wear and tear, and maximize performance €“ all for much longer than conventional fluids. It has improved thermal stability for longer fluid life, better viscosity stability for consistent transmission operation, and specific frictional enhancements for smooth gear engagements. Valvoline Import Multi-Vehicle ATF is suitable for a broad range of automatic transmissions including most Toyota, Honda, Nissan, Hyundai, Kia, BMW, Volvo, VW and other import and domestic vehicles. It€™s specifically recommended for use in the following applications: BMW LT 71141 and ETL-7045E; Nissan/Infiniti Matic-D, Matic-K and Matic-J; Mitsubishi Diamond SP-II and SP-III; Subaru ATF-HP; Hyundai/Kia SP-II and SP-III; and Toyota/Lexus Type T. For the many shifts and miles ahead, trust your transmission with Valvoline, the #1 automatic transmission fluid brand.

The yaw rate sensor is part of the stability control system which works in conjunction with the anti-lock brake system. The sensor measures the lateral movement of the vehicle, should the vehicle begin to move in a sideways direction, the anti-lock brake system will operate the brake system in a manner which may avoid a loss of vehicle control.

The yaw rate sensor is part of the stability control system which works in conjunction with the anti-lock brake system. The sensor measures the lateral movement of the vehicle, should the vehicle begin to move in a sideways direction, the anti-lock brake system will operate the brake system in a manner which may avoid a loss of vehicle control.

The body control system monitors the vehicle ride height on vehicle applications utilizing an air ride suspension system. Maintaining system ride height is critical for vehicle and braking control.

The body control system monitors the vehicle ride height on vehicle applications utilizing an air ride suspension system. Maintaining system ride height is critical for vehicle and braking control.

Suncore Shocks, 109G-14-R. EXTERNAL SUPPLY>FDO>BACK ROOM-FDO>APPLICATION SPECIFIC from Suncore

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Our Air Command systems give customers the ability to conveniently adjust their air springs with the touch of a button thanks to our Air Command Air Compressor Kits. Our designs provide an instant air source to a vehicle air suspension system, giving users the freedom to adjust their air springs to accommodate different loads and road conditions from both inside and outside of the vehicle.

WirelessAir with EZ Mount packages the manifold and compressor into one convenient, pre-assembled and factory-tested bracket, giving you everything you need to have full control of your air springs, in no time at all. This application is a universal fit and may not work with all vehicles. This product features both a frame thru bolt and self tapping screw option, allowing flexibility of placement and how it is mounted to the vehicle.

Suncore Gas Shock, 109G-14-R-PAIR. EXTERNAL SUPPLY>FDO>BACK ROOM-FDO>APPLICATION SPECIFIC from Suncore

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.