from

$162.99

Arnott’s new economical rear air shock replacement for GM vehicles with Autoride suspension will convert the rear of the vehicle from electronic air shocks to passive air shocks. This adjustable shock will keep the vehicle at the proper height and provide a smooth, comfortable ride. This easy-to-install shock includes an Electronic Bypass Module (EBM) to turn off dashboard warning lights, and an instruction manual. Arnott recommends replacing rear shocks in pairs if converting the Autoride suspension to this passive air shock. Not applicable for vehicles w/Magneride suspension.

from

$119.99

PassiveSuspConvKt

from

$337.99

The original air compressor on certain GM vehicles fails due to burn out or moisture intrusion. This Dorman OE FIX features thermal protection software and an additional protective membrane to prevent future failures.

Product Features:

Suspension Air Compressor
Suspension Air Compressor, With Two Ping Assembly And Wire Harness: OE Fix
The original air compressor on certain GM vehicles fails due to burn out or moisture intrusion. This Dorman OE FIX features thermal protection software and an additional protective membrane to prevent future failures.
Upgraded replacement – this air compressor replaces and improves on the original part for certain Cadillac, Chevrolet and GMC vehicles
Enhanced technology – features advanced thermal protection software to prevent future burn out

from

$282.99

Timbren suspension enhancement system. The decision is easy, Timbren suspension kits (SES kits) are designed to enhance the suspension of your vehicle. Improve load handling haul heavy loads with ease eliminate sag and sway.

Product Features:

Eliminate Suspension Sag: When Towing A Heavy Trailer, Timbren SES Extends The Life Of The Suspension Of Your Vehicle And Helps To Avoid Bottoming Out
Control Trailer Sway, A Condition Which Occurs With Unbalanced Loads, In Crosswinds Or When Passing Heavy Trucks Timbren SES Stabilizes Your Vehicle
Control Body Roll, During Cornering With Powerful Progressive Rate Rubber Springs Which Resist Lean And Enhance Vehicle Stability
Improve The Ride, By Allowing The Aeon(R) Rubber Springs Absorb Road Shocks And Bumps. Towing A Trailer Doesnt Have To Mean Poor Ride Quality
Economical And Trouble Free
Simple And Easy To Install

from

$26.49

CARQUEST PREMIUM Chassis parts are engineered and benchmarked to Original Equipment (OE) performance standards. CARQUEST PREMIUM Chassis provides the installation benefits of the aftermarket while providing high-quality, proven reliability. CARQUEST PREMIUM Chassis has been rigorously quality-tested, meeting or exceeding OE specifications. CARQUEST PREMIUM Chassis parts have been designed to provide a stable and safe ride to meet customer expectations and perform the way professional technicians demand.

Product Features:

OE matched design for Form, Fit, and Function
Engineered to reduce road noise and provide a stable ride.
Hardware included for easier installation (where applicable)

from

$19.99

GM Genuine Parts Wiring Relays are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These relays help connect or disconnect power to a vehicle accessory when it receives a low voltage signal from a switch. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps connect or disconnect power to vehicle accessories
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies

from

$171.99

CARQUEST premium engine management products provide the right products for a wide range of domestic and import applications. Delivering the highest performance and durability under demanding conditions.

from

$46.49

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

Protective outer coverings help provide long-lasting durability
Color-coded wires allow for easy installation
GM-recommended replacement part for your GM vehicle’s original factory component
Offering the quality, reliability, and durability of GM OE
Manufactured to GM OE specification for fit, form, and function

from

$54.99

Every new strut deserves a Monroe® Strut-Mate® Mounting Kit. Designed to reduce noise and vibration, Strut-Mate Mounting Kits complement the ride control characteristics of Monroe struts. Install when replacing conventional struts or springs.

Product Features:

PERFECT PAIRING — Ideal match for the ride control characteristics of Monroe® struts, replace all worn strut components with quality Monroe parts (sold separately) for a complete four-corner ride control upgrade
REDUCES NOISE AND VIBRATION — Features advanced elastomer technology for enhanced metal-to-rubber bonding that reduces noise, vibration and memory steer for improved performance
REPLACES OE — Available for most Monroe strut applications, this is a direct fit for replacing the OE strut mount
RIGOROUS TESTING — Fit checked and ride tested for quality you can count on
EASY TO INSTALL — Includes premium-quality replacement components where applicable – SAE-grade nuts and bolts, upper and lower spring isolators, OE-style bearings and mount, upper spring seat and front bearing plate that install easily

from

$68.99

KYB Strut Mounts eliminate the vibration and noise caused by old, hardened vibration insulators. They optimize suspension performance by offering OE quality replacement components designed for each application. KYB Strut Mounts cushion the impacts from road bumps to reduce the jarring effect, noise and vibration that old mounts transmit into the vehicle. Front bearing plates are the steering pivots and support vehicle weight. They are critical to steering performance and wheel alignment. KYB Strut Mounts and bearing plates have a reputation for providing the highest quality in the industry.

Product Features:

The Highest Quality Replacement Strut Mount Available
Optimizes Suspension Performance By Offering Original Equipment Quality Replacement Components Designed For Each Application
Superior Rubber Reduces Noise, Vibration And Harshness
Mount Bearings Provide Smoother Steering And Help Retain Front End Alignment
Matched Grade Studs And Nuts

from

$776.99

Designed to provide inflation control of your air helper springs. This kit will be an asset to your vehicle, meeting nearly all of your air supply needs.

Product Features:

Designed To Provide Inflation Control Of Your Air Helper Springs
Provides An Instant Air Source For The Air Helper Springs Or Accessories
Dual Point Fill (Both Air Springs Fill Independently Of Each Other)
Light Duty Compressor Specs (120 Pounds Per Square Inch Max Air Pressure, 9 Percent Duty Cycle, 0.32 CFM)

from

$6.29

POWER STEERING FLUID

from

$15.79

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

High-quality products that meet OE appearance and performance to

from

$254.99

Quick Strut Kit

from

$519.99

Ride Rite(TM) air helper springs mount between the frame and the suspension of light trucks, vans, and motor homes. The heavy duty convoluted air springs will handle all leveling needs with load carrying capacities between 3200 to 5000 Pounds per set.

Product Features:

Level The Vehicle Front-To-Rear And Side-To-Side
Adjustability 5 To 100 PSI
Stabilize The Vehicle While Loaded
Maximize Vehicles Load Carrying Capacity
Comes With Everything For A Quick, Easy Installation, Brackets, Air Springs, Hardware, Air Line, And Separate Valves For Manual Inflation

from

$41.99

This air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles. Made of quality components, this kit is engineered for reliable performance and durability.

Product Features:

Direct replacement – this air suspension compressor line repair kit is designed to match the original components required to repair the air suspension compressor on specified vehicles
Ideal solution – this kit is a reliable replacement for original components that have failed due to damage or fatigue
Durable construction – this kit is made from quality components to ensure reliable performance and a long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$74.99

Shock Kit

from

$39.99

Shock Kit

from

$219.99

Suspension Ride Height Sensor

from

$254.25

Suspension Ride Heig

from

$25.99

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

from

$36.49

Monroe® is one of the automotive industry’s best-known and most trusted original equipment and aftermarket brands, having delivered innovative undercar solutions to leading global OE manufacturers and generations of professional technicians and vehicle owners. This heritage of leading-edge products and exceptional customer support has made Monroe® shocks, struts and other ride control components a preferred choice of automotive professionals worldwide.

from

$595.99

This air suspension shock is designed to match the fit and function of the original shock on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

Direct replacement – this air suspension shock is designed to match the fit and function of the original shock on specified vehicles
Restores functionality – reliable replacement for an original part that has failed due to internal rubber components that have torn or rotted
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$101.99

Ideal for hauling, Monroe® Max-Air® shock absorbers can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by vehicle suspension, tires and transmission. See vehicle owner’s manual.)

Product Features:

MAINTAIN RIDE HEIGHT UNDER LOAD — Air chamber can be inflated or deflated up to 150 PSI to maintain level height with additional weight up to 1,200 lbs. (capacity is limited by suspension, tires and transmission, see owner’s manual)
EASY TO ADJUST — Special air fitting resists air leakage and ties into factory system (where applicable) or manually inflates with an air compressor, pair with Monroe air shock accessory and shock air hose AK kits (varies by application)
EXCEPTIONAL HANDLING — Full-displaced valving on compression and extension cycles for a smooth ride
BUILT TO LAST — Hardened and precision ground piston rod for consistent performance, sintered iron piston for enhanced durability and longer service life and lubricated air sleeve reduces friction for smooth operation
CONSISTENT RIDE — OE all-weather fluid contains special modifiers to handle extreme temperatures and help reduce friction and ensure smooth rod reaction
Sintered Iron Piston: Stronger than traditional metals, enhances durability for longer service life.
Special Air Fitting: Resists air leakage.

from

$258.99

Arnott’s premium rear shock for GM vehicles equipped with air-assisted suspensions is an ideal replacement for a failing rear shock. This top-of-the-line shock, engineered in the USA, delivers control, stability, performance, and comfort. Arnott’s new aftermarket shock connects to the vehicle’s auto-leveling system with no modifications and includes a bypass resistor to turn off dashboard warning lights for the auto-damping control unit. These rear shocks should be replaced in pairs. Not applicable for vehicles w/Magneride suspension.