GMC PB15 Series Belts and Hoses
Top GMC PB15 Series Belts and Hoses Categories
We carry over 11 Belts and Hoses in inventory for the GMC PB15 Series. If you’re looking for aftermarket Belts and Hoses for your GMC PB15 Series, check out all these categories:
Essential GMC PB15 Series Belts and Hoses
Imperial – Metal Line Kit for Engine Oil Coolers (Part No.240293)
from
$59.99
Metal line kit for engine oil coolers. Routes oil lines past exhaust manifolds.
Product Features:
See More
Product Features:
- Metal line kit
- For use in engine oil cooler applications
- Routes oil lines past exhaust manifolds
- Provides protection where standard hoses can fail
Imperial – 1/2" x 12′ Engine Oil Cooler Hose (Part No.240112)
from
$48.99
1/2″ x 12′ engine oil cooler hose. Imperial engine hose is specifically designed for engine cooling applications.
Product Features:
See More
Product Features:
- Engine oil cooler hose
- Size: 1/2″ x 12′
- Designed for engine oil applications
- 12′ hose length accommodates most applications
Gates – Green Stripe Heavy-Duty Vulco-Flex Coolant Hose (Part No.26611)
from
$34.99
Heavy-duty flexible hose designed to replace straight or curved coolant hoses. The benefit is maximum coverage with minimum inventory. Hose inside diameter remains constant from end to end. No convolutions inside hose so tube is smooth, allowing free coolant flow. Approved for marine applications.
Product Features:
See More
Product Features:
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- The steel wire spiral allows them to take on multiple shapes without bending or crushing
- EPDM tube and neoprene cover for longer life
- Polyester fabric reinforcement vulcanizes without unnecessary deformation in connections
- Heat, oil and ozone resistant
- Meets SAE 20R5 Type EC Class D-2 specifications
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transportation applications.
- Caution: Do not use for fuel or oil transfer applications.
Gates – Premium Molded Coolant Hose (Part No.20584)
from
$33.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to resist electrochemical degradation, which is the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube; synthetic fiber knit reinforcement; heat, ozone- and chemical coolant-resistant EPDM cover
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing clamps and connectors each time a new radiator hose is installed.
- Caution: Do not use for fuel or oil transfer applications
Gates – Premium Molded Coolant Hose (Part No.20065)
from
$21.49
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Engineered to resist electrochemical degradation, the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM tube: synthetic fiber knit reinforcement: heat-, ozone- and chemical coolant-resistant EPDM cover
- Meets requirements of SAE 20R4, class D2 and DIN 73411, class A (except for tolerances)
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Note: Gates recommends replacing hose clamps each time a new coolant hose is installed
- Caution: Do not use for fuel or oil transfer applications
Gates – Safety Stripe Standard Straight Heater Hose (Sold by foot) (Part No.28412)
from
$3.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- Caution: Do not use for fuel or oil transportation applications.
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Premium Molded Coolant Hose (Part No.20563)
from
$17.99
Gates Molded Coolant Hose is manufactured to fit specific applications. Similar to OEM specifications. Approved for marine applications.
Product Features:
See More
Product Features:
- Specifically-engineered materials resist collapse under vacuum
- Designed to resist electrochemical degradation, which is the leading cause of hose failure
- Pre-shaped to fit and to ensure perfectly sealed conditions
- EPDM Tube; synthetic fiber knit reinforcement; EPDM cover resistant to heat, ozone and chemical refrigerants
- Meets the requirements of SAE 20R4, Class D2 and DIN 73411, Class A (except for tolerances)
- Temperature range -40 degrees F to +257 degrees F (-40 degrees C to +125 degrees C)
- Note: Gates recommends replacing clamps and connectors each time a new cooling hose is installed.
- Caution: Do not use for fuel or oil transportation applications.
Gates – Straight Heater Hose: EPDM, Direct Fit, 0.625" Inside Diameter (sold by foot) (Part No.28411)
from
$1.99
Premium hose constructed for long service life.
Product Features:
See More
Product Features:
- Good resistance to high temperatures for extended periods of time, which prolongs service life
- Meets SAE 20R3 Standard Wall Class D-2 requirements
- Temperature Range: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C)
- CAUTION: Do not use for fuel or oil transfer applications
- PLEASE NOTE: Item is priced and sold by the foot. See store for details.
Gates – Notched V-Belt: 53.61" Long, 1 Strand, Exact Fit (Part No.9530)
from
$45.99
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Gates – Automotive XL High Capacity V-Belt (Part No.9395)
from
$31.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- The shape is ground to ensure precise dimensional control of the top width and sidewall for a correct fit to the pulley.
- Thermally active pull cords for maintenance-free operation when the strap is properly installed and tensioned
- Resists oil, heat, ozone, weather and aging for improved belt life
- Meets or exceeds SAE J636C specifications
Gates – Automotive XL High Capacity V-Belt (Part No.9520)
from
$41.49
Replacement belt for the most demanding engine drives. Due to thermal forces, this variable notched belt actually tightens on the drive as it gets hot. This results in improved belt performance by reducing tension decay and noise.
Product Features:
See More
Product Features:
- Fiber-loaded rubber stock adds flexibility along the length of the belt and provides greater lateral stability in the pulley
- Form-ground to ensure precise top width and sidewall dimensional control for proper fit to the pulley
- Thermally-active tensile cords for maintenance-free performance when properly installed and tensioned
- Resistant to oil, heat, ozone, weathering, and aging for better belt life.
- Meets or exceeds SAE J636C specifications
GMC PB15 Series Belts and Hoses Categories
Helping You Find the Right Belts and Hoses for Your GMC PB15 Series
You love your PB15 Series. So we’ve made it easier than ever to help you find GMC PB15 Series Belts and Hoses in our online catalog. Our inventory holds 11 aftermarket and OEM Belts and Hoses for your GMC PB15 Series, ranging from $1.99 to $59.99.
We offer parts from 2 brands trusted to make quality Belts and Hoses for your GMC PB15 Series.
Find your PB15 Series Belts and Hoses here, order online, and have your order shipped directly to your home. Prefer to have an in-person look at your GMC PB15 Series part to confirm it’s just right? You can find your nearest Advance Auto Parts store and confirm they have the part in stock before heading over.
Top Belts and Hoses Brands for Your GMC PB15 Series
Our inventory holds Belts and Hoses for your GMC PB15 Series from 2 trusted brands. You’ll find OEM and aftermarket parts from brands like Imperial and Gates, all of which can keep that GMC happy.
FAQs for GMC PB15 Series Belts and Hoses
What are the most purchased Belts and Hoses for the GMC PB15 Series?
Out of 11 Belts and Hoses for the GMC PB15 Series, the most popular in our inventory are:
