GMC P25/P2500 Van Engine Parts

High Performance head bolts are available with a reduced wrenching hex or 12 point and wide area flanged head that eliminates the need for valve train removal to facilitate cylinder head retorquing. All High Performance Series bolts are 180,000 PSI (which is 15 Percent stronger than Grade 8) and kits come complete with hardened parallel ground washers.

Product Features:

• High Performance Head Bolts Are Available With A Reduced Wrenching Hex Or 12 Point
• Wide Area Flanged Head That Eliminates The Need For Valve Train Removal To Facilitate Cylinder Head Retorquing
• Rated At 180,000 PSI Tensile Strength
• High Performance Head Bolts Are Stronger

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• Timing cover set includes gaskets and seals necessary for timing chain/belt replacement job
• Application specific design to ensure a perfect fit
• Engineered and manufactured specifically for the repair environment
• Unsurpassed quality you can trust
• Validated for fit, form, and function

Our unique Multi-Layered steel head gasket embossment formation process optimizes the embossment radius, reduces stress points, enhances gasket conformability, and provides uniform clamp load distribution. This all results in superior surface contact between block and cylinder head. All head gasket layers/spacers go through an additional process to significantly reduce forming induced stress. Advantages are reduced brittleness in material, increased flexibility and deformation retention. This stabilizes the gasket, resulting in reduced cylinder bore distortion and improved combustion seal fro the extreme cylinder pressures found in high compression, supercharged and turbocharged applications. A proprietary polymer coating ensures the micro-seal of engine coolant and oil fluids. A typical MLS head gasket requires a smoother (30Ra) surface finish than composite head gaskets. Mr. Gasket’s proprietary polymer coating will seal a surface finish twice as rough (60Ra) as a typical MLS head gasket. For high performance street, drag race and oval track use.

Product Features:

• Gasket bore – 4.035 inch: Compressed thickness – .040 inch
• Manufactured from 3-layer premium grade stainless steel and state of the art laser cutting
• Optimized sealing embossments seals extreme cylinder pressure
• Provides excellent stability and reduces cylinder bore distortion.
• Proprietary polymer coating ensures the micro seal of engine coolant and oil fluids.
• Ideal for supercharged, turbocharged, nitrous oxide and extreme compression ratio engines
• For high-performance street, drag race and oval track use

If you have ever installed a rocker stud into a cylinder head and watched it wobble as it screwed in, you knew from the beginning that the rocker geometry was going to be inconsistent all over the place. ARP rocker studs are concentric within 0.005 T.I.R. thread pitch to thread pitch. They run in straight and true. Lengths are exact designed to provide positive seating every time. An extra large radius base offers greater resistance to flex. Available in both High Performance and Pro Series models. To be used with ARP patented Perma Loc(TM) adjusters.

Product Features:

• Made Of 8740 Chrome Moly Forgings
• Heat Treated To 180,000 PSI
• Excellent For Elapsed Time Bracket Racing, Limited Rule Oval Track Competition And Street Use
• Lengths Are Exact Designed To Provide Positive Seating Every Time
• Set of 16
• .800″ Adjuster Thread Length
• 3/8-24 Shank Diameter and Thread
• 3/8″ Typical Small Block Application

Made In USA. A new Melling pick-up tube/oil screen assembly provides the lubrication oil as well as protection for your oil pump from materials that find their way into the engine oil supply system. Contaminates enter your oil system via engine wear, extended time between oil changes and other internal engine sources. These contaminates can interfere with the proper oil flow and pressure spring functions resulting in engine damage and/or failure. Melling suggests that a new properly installed oil pump pick-up tube/screen be a part of every oil pump installation. Several Melling oil pump applications are offered with an oil screen included.

Product Features:

• Manufactured from high quality durable materials for long wear
• Precision engineering protects the engine from dirt and contaminants
• Designed for long-life and worry-free performance
• Meets or exceeds original equipment specifications

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Designed to repair damaged, grooved or worn shafts
• Durable stainless steel construction for corrosion-free sealing surface that surpasses most original shaft specifications
• Ideal for a shaft where indications of seal wear, such as tracks or grooves have developed
• Ultra-thin construction (0.01/0.25mm wall thickness) allows original seal size to be used with minimal additional lip loading
• Easy to install with removable flange and installation tool

Manufactured from high quality components by an OE Supplier. Proper fit and sealing prevents oil loss. Designed to OEM specifications. High quality finish is designed to compliment the engine compartment appearance.

Product Features:

• Provides proper seal to ensure leak prevention
• Stops engine blow by
• High quality construction
• Meets all OEM specifications

Sealed Power parts provide innovative designs, use leading-edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Hypereutectic
• Made with exclusive FM425 material for excellent strength & scuff resistance – allows tighter bore and improves sealing for less blow-by
• Sophisticated “barrel” profiles help optimize oil wedge between skirt and wall.
• Piston skirts protected by next-gen DUROSHIELD coating.
• TAC ring groove geometry
• Weight matched to +/- 2 grams.

Big Block Chevrolet tubular head dowel, .638/.639 inch o.d. (outer diameter) by 1/2 inch. Packaged two per set. These hard to find dowel pins are precision machined then case hardened for accurate alignment in engine assembly.

Product Features:

• Precision Machined
• Case Hardened
• Give Accurate Alignment
• 2 Per Set

National has built a reputation as one of the most respected names in the industry. We have offered premium sealing solutions for more than 75 years. Our design team keeps pace with the industry and provides advanced solutions for today’s vehicles.

Product Features:

• Made of stainless steel
• Designed to prevent timing cover seal leaks
• Takes up gaps caused by worn-out harmonic balancer shafts

Anchor 2282 This mount supports the engine and dampen vibration. Each mount is specifically engineered and designed to OE standards. Natural and SBR rubber provide maximum life and performance. Steel fasteners are heat treated grade 5 bolts. A special bonding agent is used to ensure a rubber to metal bond. Rubber material is mixed to specific Durometer, hardness.

Product Features:

• MAXIMUM LIFE & PERFORMANCE: Both natural and SBR (Styrene Butadiene) rubber provide good abrasion resistance and aging stability to ensure maximum life and performance.
• MEETS OR EXCEEDS DUROMETER MEASUREMENTS: All rubber material is manufactured to specific Durometer (hardness) measurements based on the vehicle’s application requirements.
• HARDENED STEEL FASTENERS: All fasteners are made of hardened steel with heat treated Grade #5 bolts.
• SUPERIOR BOND: A special Chemlok bonding agent is used to ensure a superior rubber-to-metal bond.
• HYDRAULIC MOUNT DESIGN: Hydraulic Mounts (applicable where OE) are designed for most front wheel drive vehicles because transverse drive train mounting.
• For Years: 1963-1974
• Weight approx: 2 Lbs
• Part Group: 2282, 2282

Product Features:

• Superior Wear Protection – Formulated with extreme pressure additives to protect engine components from metal-to-metal contact during initial startup
• High Tackiness – Stays in place during assembly and storage, ensuring consistent lubrication exactly where it’s needed
• Broad Compatibility – Safe for use with all engine components including camshafts, lifters, bearings, and valve train parts
• Easy Startup Support – Reduces friction and prevents dry starts by providing instant lubrication during first engine fire-up

The engineers at ARP spent quite a bit of time developing these highly effective, unique oil pan studs. They are designed to make it as easy as possible to install a pan and seal it properly. You will note that the studs have a radiused bullet nose that serves to locate the pan rails, then allow the nuts to be easily installed without the worry of cross threading. For those who prefer bolts, ARP got you covered, too. Both are available in black oxide finished chrome moly steel or rust proof stainless steel. Also, you may choose between conventional hex style or the space saving 12 point nuts. The stud kits come complete with a special locking flanged nut, while the bolt kits come with washers.

Product Features:

• Designed To Make It As Easy As Possible To Install A Pan And Seal It Properly
• Bolt Kits Come With Washers
• Stud Kits Come Complete With A Special Locking
• Easily Installed Without The Worry Of Cross-Threading

A new Melling oil pump shaft is recommended to complete every new oil pump install. Melling offers a complete line of high quality shafts for domestic and import pump applications. A new oil pump shaft is necessary due to possible metal fatigue, cracking

Product Features:

• Manufactured from high quality materials for consistent durable wear
• Precision engineered for optimum fit and function
• Designed for long-life and worry-free performance
• Meets or exceeds original equipment specifications

Product Features:

• Brand may vary by location

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• State-of-the-art manufacturing
• Exceptional material quality
• Exacting tolerances
• Heat treated tips
• Stock or mild modified replacement
• Made in USA

Aluminum cam gear, steel crank gear. feature “helical” tooth form for quiet operation, and precision machined bore for true fit. SET INCLUDES: 2524 Engine Timing Camshaft Gear (1 EA), 2537 Engine Timing Crankshaft Gear (1 EA).

Product Features:

• Utilizes the latest in design and technology to offer complete chain sets
• CAD designed and manufactured using premium materials
• Each part is extensively tested and measured for function, fitment, and durability to ensure optimal performance
• Meet or exceed OEM performance requirements, ensuring a quiet and maintenance-free experience
• Refer to our online catalog for detailed application-specific information

Made in USA. Melling high volume oil pumps increase the amount of oil flow by an average of 20% through the engine improving oil pressure at idle providing dependable performance every time in every application. Every Melling high volume oil pump is engineered and assembled to the highest production standards from high quality materials. All Melling high volume oil pumps use the latest in gear and gerotor technology to provide the highest level of quality and performance. High volume gears are machined to close tolerances to ensure proper engine pressure and correct, efficient pump operation. End plates are precision ground for maximum wear resistance. Every Melling oil pump is individually tested for pressure and flow under conditions designed to duplicate actual engine operating conditions.

Product Features:

• Manufactured from high quality materials for consistent durable wear
• Precision engineered for optimum fit and function
• Designed for long-life and worry-free performance
• High volume oil pump supplies additional oil to engines when necessary for high performance applications or low oil pressure issues

Heat Treated Steel Bearing Race Material. Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment. Prevents Wear On Engine Block. Can be Used to Repair a Damaged Engine Block Thrust Surface.

Product Features:

• Heat Treated Steel Bearing Race Material
• Must Machine Cam Sprocket or Engine Block .030″ to Ensure Proper Chain Alignment
• Prevents Wear On Engine Block
• Can be Used to Repair a Damaged Engine Block Thrust Surface.

Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Steel-backed Babbitt lining material
• Used in automotive and high-performance
• Babbitt is designed to perform under extreme loads w/o damaging other engine parts
• Babbitt is more environmentally friendly than other material
• ISO & QS certified manufacturing

With the backing of an industry-leading two year or 60,000 mile parts and labor warranty, each Dayco timing chain kit includes top-grade timing chains, precision machined crank sprockets and cam sprockets, tensioners, high-grade plastic guides, seals and VVT solenoids and cam phasers if the application calls for it.

Product Features:

• High quality chains prevent stretch for the life of the kit, addressing the no. 1 replacement issue
• Precision machined sprockets for exact timing
• High-grade plastic guides use same material as OE for excellent wear resistance
• Contains: Camshaft Sprocket, Crankshaft Sprocket, Timing Chain

Sealed Power« parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.

Product Features:

• Unsurpassed quality that you can trust
• Uses leading edge materials
• State-of-the-art manufacturing
• Exacting tolerances
• Meets or exceeds OEM specifications

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

• DESIGNED FOR IMPERFECT SEALING SURFACES – Engineered and manufactured specifically for the repair environment to help seal imperfect sealing surfaces
• STRONG AND DURABLE – Features molded rubber over a rigid carrier for durability, precise alignment and fit
• SUPERIOR SEAL – Proprietary molded rubber design helps to eliminate leak paths, especially in problem corner areas
• EASIER TO INSTALL – One-piece construction is easier to install than multi-piece assemblies and helps reduce potential for installation errors
• INSTALLATION AID – SnapUps aid in holding the gasket in place for easy installation and allow for quick bolt tightening
• PREVENTS OVERTIGHTENING – Torque limiters help eliminate overtightening and gasket splitting and extruding
• EVERY PART FOR THE REPAIR – Fel-Pro gasket sets include every part needed for the repair unless otherwise noted

Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components.

Product Features:

• Precision engineered and made from high quality alloys
• Provides recommended spring pressure with valve on seat and at maximum lift
• Meets unique demands of performance engines
• Delivers dependable performance and superior service life
• Application-specific design for perfect fit and correct operation

Made In USA. Melling offers a replacement oil pump drive gear for several Jeep and GM applications. This gear should be replaced should the original gear show ware or be damaged or lost during the rebuilding process.

Product Features:

• Manufactured from high quality materials for consistent durable wear
• Precision engineered for optimum fit and function
• Designed for long-life and worry-free performance
• Meets or exceeds original equipment specifications