from

$1.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$6.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$4.29

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

Our knock sensors are designed to respond to knock frequencies up to 1000 Hz accommodating shifts in engine knock frequency making it a more flexible sensor responding to correct engine knock over a broad range of vehicle conditions
Manufacturing processes include an automated data acquisition system to continuously monitor the sensor output to ensure that it responds with appropriate voltage output at the specified frequency range
All units are 100% tested using an accelerometer vibration test to ensure trouble-free operation
Featuring the broadest sensor coverage in the market, we meet the service professionals needs with the highest quality product every time he opens the box
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$14.49

Product Features:

RIGHT TYPE: Needle bearings are application-specific for the repair occasion, using either caged or full complement designs
PREMIUM MATERIALS: Precision manufactured using high-quality materials for outstanding durability and performance
OE-STYLE DESIGN: Engineered to meet OE specifications
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$30.99

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
Sealed connections (where applicable) to prevent environmental corrosion and performance issues
Global coverage for import and/or domestic applications
OE specified wire gauge to ensure a reliable electrical connection
Designed to meet or exceed OE specifications in form, fit and function

from

$9.99

Our Starter Motor Shims are manufactured with a high corrosion resistance for long-lasting performance. The shims effectively space out the starter for proper alignment.

Product Features:

Conveniently available in various styles and in packs of different quantities
High quality steel construction
Shimming helps stop whining and/or grinding noises from the starter motor when due to improper alignment
Dorman’s Starter Motor Shims are constructed to strict engineering quality standards

from

$39.99

Relays are electrical switches used to convert a small electrical load into a circuit capable of handling a high amperage load. Computers and small switches are not designed to carry the higher amperage requirement of a circuit that may have an electric motor, solenoid, or high amperage lighting fixture. Within a relay are contacts that are controlled with electromagnetism, when the circuit switch commands the device on or off, magnetism will pull or release the contact arm closing or opening the contacts within the relay that carry the voltage.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Computer-Aided Design (CAD), laser scanning and 3D printing – utilizing Fused Deposition Modeling (FDM) and Stereolithography (SLA) – in the part design process ensures speed-to-market and a precise fit guaranteed.
Where applicable, robust circuit board design increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
Tin plated lead frame prevents corrosion and ensures a reliable terminal connection under adverse ambient conditions.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
100% end-of-line tested to ensure accurate signal output providing product reliability, every time.

from

$12.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$21.49

Product Features:

BUILT TO LAST: Advanced heat treatment process for strength
PREMIUM MATERIALS: Precision manufactured using premium-grade steel for lasting performance and extended bearing life
RELIABLE PERFORMANCE: Element size and quantity are engineered to meet or exceed the load rating of OE bearings
COMPREHENSIVE COVERAGE: Industry-leading coverage for domestic and import applications
RIGOROUS TESTING: Comprehensive testing throughout design and development processes by National engineers for quality you can count on

from

$107.99

Carquest Starters with 100% NEW construction will restore hard working vehicles to exceed OE specified performance & endurance. All new units and components offer unmatched performance, reduce downtime & customer comebacks. Carquest HD alternators are pri

Product Features:

High quality components form the foundation our parts are built from. Transpo’s innovative and high quality electronic technologies for internal components are incorporated to achieve high performance outputs.
Power & Efficiency are designed into every component. No matter the ambient temperature, starters will provide maximum cranking power to get engines running.
Connectors and power transmission components are highly resistant to extreme moisture environments because we use nickel plated contactors and double armature coating. We maintain a rigorous test schedule with endurance, salt spray, dirt and grime and out
Integrated magnetic switch provides protection against weak power from batteries.
Over-Crank Protection (OCP) Monitors heat in starter from over cranking & shuts down starter to prevent burning
Precision design and machining are the Extreme vibration failure solution. Vehicles often perform in adverse conditions like extreme temperatures that create tolerance shifts that produce high frequency vibration, which leads to resistance in power transf
Load dump protection ensures transient voltage spikes do not damage transistor
Improved power transmission with lower engine speed keeps accessories and powered implements running at maximum output without additional load to the engine.

from

$7.99

This starter bolt is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this starter bolt matches the fit and function of the factory part on specified years, makes and models
Ideal solution – this bolt is a reliable replacement for an original part that is missing or has failed due to fatigue
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$48.99

CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.

Product Features:

CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.

from

$24.99

CARQUEST Voltage Regulators are engineered and created by an automotive charging system manufacturer designed to meet or exceed OEM specifications.

Product Features:

CARQUEST Voltage Regulators are designed to match OE fit, form and function. Fitted with critical OEM electronic components results in longer life expectancy.
CARQUEST Voltage Regulators are mechanically designed with utilization of surface mount technology, robust mechanical housing, and consistent encapsulation to protect against moistures & vibration.
CARQUEST Voltage Regulators uses surface mount technology and uniform encapsulation to protect against moistures & vibration.
CARQUEST Voltage Regulators are 100% individually tested for all product functionalities that includes the proper voltage set-point, power capabilities, and other product specifications.

from

$48.99

These brackets are made from heavy gauge steel, polished to a high luster, then chrome plated for lasting beauty, Similar in design to original equipment units, these brackets can be adapted to other engines.

Product Features:

Heavy Gauge Steel
Polished To High Luster
Chrome Plated For Lasting Beauty

from

$83.99

Mr. Gasket small block Chevy lower alternator mounting kit designed to work with a short water pump. Made of heavy gauge chrome plated steel. Complete with all necessary mounting hardware. Designed to relocate the alternator to the lower left side of the motor. This mounting bracket will make your engine compartment look neat and sanitary. Possible cross member interference on some applications.

Product Features:

Alternator Relocating Kit
Heavy Gauge Chrome Plated Steel
All Necessary Hardware Included
Helps To Give Engine Compartment A Clean Look
Designed To Work With Short Style Water Pump
Possible Cross Member Interference On Some App

from

$3.99

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

Designed to OE standards for ease of installation
BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

from

$2.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. Individual motor components are available to service any failed part within the motor such as brushes, bushings, and starter drive unit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$22.79

GM Genuine Parts Ignition Lock Cylinders are designed, engineered, and tested to rigorous standards, and are backed by General Motors. These cylindrical tumblers are used to help power on and start your vehicle. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Helps power on and start your vehicle
Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies
Collision parts are designed to help promote proper and safe repair

from

$25.05

LockSmart® is a specialized aftermarket lock brand featuring door, trunk, and ignition lock cylinders. LockSmart® provides OE fit, form, and function locks across domestic and import applications for both late and older model vehicles.

Product Features:

Direct-fit OE replacement ignition lock cylinder ensures effective start of engine energy supply
Constructed from high-grade materials to ensure durability and longevity
Undergoes 100% testing for proper fit, form, and function
As a global manufacturer, we maintain complete quality control throughout the manufacturing process

from

$131.99

Carquest Professional starters are 100% new units that are built to meet or exceed original equipment (O.E.) specifications. Our new starters are engineered and built by an IATF/TS 16949 certified supplier that meets the highest standards achievable. Carquest Professional starters are re-engineered to include improvements and enhancements (where applicable) to the OE design to extend longevity and service life. Our new starters are built with all new components and are 100% triple-tested to ensure high quality that is backed by an industry-leading warranty. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Manufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Housings are 100% new with dimensions computer gauged and measured to ensure proper fitment
All new components are utilized to ensure long service life
Internal electronics are upgraded for heavy duty reliability (where applicable)
Armatures and commutators are 100% load tested
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$106.99

Carquest Standard starters are designed and built to meet original equipment (O.E.) specifications, while providing great value. Our starters are remanufactured by an IATF/TS 16949 certified supplier that meets the highest standards achievable. All of our Carquest Standard starters are inspected and 100% tested to ensure they are built to meet OEM fit, form and function. We also offer technical support at 1-800-228-9672 for product questions, diagnostic troubleshooting and installation assistance by ASE Certified Technicians.

Product Features:

Designed to meet OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672
Designed to meet OE specifications for fit, form and function
Remanufactured by an IATF/TS 16949 supplier that meets or exceeds the highest standards in the industry
Application-specific technical bulletins included where applicable
All units are 100% triple tested to ensure quality and performance
Technical support team staffed with ASE Certified Technicians: 1-800-228-9672

from

$65.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$68.99

The charging system has been required as long as we have had a need for an electrical system and from research it’s been since the requirement of horns in motor vehicle in the early 1900’s. An alternator is a voltage generator that uses mechanical energy to rotate a set of magnets within a field of windings called a stator. The alternating current (AC) voltage created by the spinning magnetic field is converted into a usable direct current (DC) voltage with a rectifier and then regulated by a voltage regulator so that the voltage level in the electrical system stays within a specific operating range. The alternator provides all the voltage needed to operate a vehicle, the battery is only used as a reserve for heavier load conditions, as a voltage source for the engine starting system, and to supply a small amount of voltage to the electromagnets in the alternator which boosts the magnetic field in the alternator and increases voltage output.

Product Features:

Application matched components ensure the charging system can be returned to like new condition.

from

$265.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$43.99

The starting system consists of the rotating electrical motor and solenoid which may be mounted on the starter motor or mounted remotely. The electric motor drives a gear which engages with the engine’s flywheel located at the rear of the motor, when the motor is energized, the motor will turn the engines crankshaft. The starter solenoid is an electric relay, or switch used to provide power to the starter motor or any electrical device that requires high amperage to operate. A low amperage wire winding within the solenoid will create magnetic force when voltage is applies from a remote switch, such as the ignition switch or another type of remote mounted switch. The contacts within the relay carry a high amperage load to run an electric motor or some other type of high load circuit.

Product Features: