GMC Jimmy Exhaust System Kits

Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.

Product Features:

• Reducer Flex-Tubes
• Reduces Backpressure
• Hardware Included
• Instructions Included

Give your Chevrolet Silverado/GMC Sierra 1500’s exhaust system an upgrade with a DynoMax Ultra Flo welded 3-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:

• COMPATIBILITY — Designed for 2009-2013 Chevrolet Silverado and GMC Sierra 1500; 143.5-in. wheelbase; see product information for compatibility and engine specs
• COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
• EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
• EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
• IMPROVED FLOW CAPACITY — 3-in. Stainless-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
• SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,800 SCFM
• PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
• ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
• ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
• NOTES — 4-in. Outlet double wall, buffed and polished stainless-steel slant cut tip

Give your Chevrolet or GMC C1500, C2500, K1500 or K2500’s exhaust system an upgrade with a DynoMax Super Turbo single 2.5-in. cat-back exhaust system. Features a DynoMax Super Turbo muffler that channels exhaust flow and reduces turbulence and fiberglass matting that absorbs unwanted interior resonance for a mellow tone.

Product Features:

• COMPATIBILITY — Designed for 1988-1993 Chevrolet and GMC C1500, C2500, K1500 and K2500; 117.5-in. and 131.5-in. wheelbases; see product information for compatibility and engine specs
• COMPLETE SOLUTION — Includes DynoMax Super Turbo muffler, pipes, brackets and clamps
• EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
• EASY TO INSTALL — Direct-fit pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
• IMPROVED FLOW CAPACITY — Aluminized steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
• PRECISION DESIGN — Exclusive flow director technology channels exhaust flow and reduces turbulence on most applications; dyno proven to flow up to 425 SCFM
• PREMIUM PERFORMANCE — Large flow tubes improve exhaust flow and reduce backpressure
• ENGINEERED TO LAST¿–¿Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
• ENGINEERED TO LAST┐–┐Aluminized-steel muffler reduces corrosion and internal drainage system reduces moisture collection
• SPECS — 2.5-in. straight cut oval tail pipe

Product Features:

• Increase Performance
• Heavy Duty
• Header Dual Kit
• Includes All Hardware
• Installation Instructions
• Offer Maximum Versatility
• Mufflers Not Included

Designed to provide maximum performance and maximum value our Performance Series features 100 Percent aluminized steel at a no nonsense price. These systems are designed to provide the MBRP performance and sound you have grown to love to those who are operating on a tight budget. Featuring a two piece tail pipe and bolt-on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere.

Product Features:

• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• 100 Percent Aluminized Steel
• Features A Two Piece Tail Pipe And Bolt-On Hangers
• Easy, Bolt-On Design, Makes Easy To Install

Give your vintage vehicle’s exhaust system an upgrade with a DynoMax? dual header kit. Designed to attach to OE manifolds, it features a special reducer that allows for a variety of mounting options.

Product Features:

• COMPATIBILITY — Designed for a variety of full-size 1973-89 GMC 4WD trucks and Chevrolet 4WD SUVs; see product information for compatibility and engine spec
• BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE manifolds
• FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
• IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
• SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tailpipes exit each side of vehicle behind rear tires
• COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
• PREMIUM MATERIALS — Made from quality aluminized steel for durability and long life
• PREMIUM MATERIALSÿ–ÿMade from quality aluminized steel for durability and long life
• BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
• WARNING — Not legal for use on pollution-controlled motor vehicles

Give your vintage vehicle¿s exhaust system an upgrade with a DynoMax dual header kit. Designed to attach to OE headers, it features a special reducer that allows for a variety of mounting options.

Product Features:

• COMPATIBILITY — Designed for full-size 1973-88 Chevrolet Blazer/GMC Jimmy 4WD; see product information for compatibility and engine spec
• BUILD IT YOURSELF — Design and custom fabricate your own exhaust system with this kit that attaches to OE headers
• FLEXIBLE MOUNTING — Special reducer design allows for a variety of mounting options
• IMPROVED FLOW CAPACITY — Smooth bends improve flow capacity over traditional bends
• SPECS — Extra-long tailpipes with side exits with a full 2.25-in. diameter; tail pipes exit each side of vehicle behind rear tires
• COMPLETE SOLUTION — Includes all the necessary clamps, hangers, flanges, gaskets, mounting hardware, intermediate, extension and tail pipes
• PREMIUM MATERIALS?–?Made from quality aluminized steel for durability and long life
• BETTER TOGETHER — Complete your system with premium DynoMax mufflers and DynoMax accessories for a complete performance exhaust system
• WARNING — Not legal for use on pollution-controlled motor vehicles; headers are for racing use only and not intended or applicable for highway use

Give your Chevrolet Avalanche, Suburban or Yukon XL 1500’s exhaust system an upgrade with a DynoMax Ultra Flo welded 3-in. single cat-back exhaust system. Features a DynoMax Ultra Flo welded muffler that features Continuous Roving Fiberglass (CRF) to absorb unwanted interior resonance while maintaining a deep performance tone.

Product Features:

• COMPATIBILITY — Designed for 2002-2006 Chevrolet Avalanche 1500 and 2001-206 Chevrolet Suburban and Yukon 1500; see product information for compatibility and engine specs
• COMPLETE SOLUTION — Includes DynoMax Ultra Flo welded muffler, pipes, tip and clamps
• EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn¿t require specialized fabrication and/or welding
• EASY TO INSTALL — Direct-fit bolt-on pre-assembled solution with welded hangers, pipes and clamps for easy installation that doesn┐t require specialized fabrication and/or welding
• IMPROVED FLOW CAPACITY — 3-in. Aluminized-steel tubing with mandrel bends improves flow capacity over traditional bends while increased pipe diameter from OE sizes increases flow and power
• SUPERIOR PERFORMANCE — Straight-through design ensures unrestricted exhaust flow and reduces back pressure; dyno proven to flow up to 1,800 SCFM
• PREMIUM ACOUSTIC CONTROL — Exclusive Continuous Roving Fiberglass (CRF) technology absorbs unwanted interior resonance while maintaining a deep performance tone
• ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection¿and 100% welded design for maximum durability
• ENGINEERED TO LAST — Muffler features stainless-steel construction with a micro-finish for lifelong protection┐and 100% welded design for maximum durability
• NOTES — 4-in. Outlet double wall, buffed and polished stainless-steel slant cut tip; 3-in. straight cut tail pipes

Designed to provide maximum performance and maximum value our Performance Series features 100 Percent aluminized steel at a no nonsense price. These systems are designed to provide the MBRP performance and sound you have grown to love to those who are operating on a tight budget. Featuring a two piece tail pipe and bolt-on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere.

Product Features:

• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• 100 Percent Aluminized Steel
• Features A Two Piece Tail Pipe And Bolt-On Hangers
• Easy, Bolt-On Design, Makes Easy To Install

Borla(R) Cat-back(TM) and Rear Section exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy And The Distinctive BORLA(R) Sound Of Power respected by motoring enthusiasts everywhere.

Product Features:

• Systems Are Constructed From High-Quality T-304 Stainless Steel For Maximum Durability
• Mufflers Are Packed With Ultra-Durable, Continuous-Strand Sound-Absorbing Composite Filament
• A Single Core, High Flow Design Adds Power And Driving Excitement With A Sound That Is Deep And Throaty
• Easy Bolt-On Installation
• Touring Systems Are Calibrated On A Vehicle-By-Vehicle Basis To Deliver The MostáDesirableáSound

The BORLA(R) Cat-Back(TM) Name Implies The Exhaust System Is Located Behind The Factory Catalytic Converter Where There Factory Emissions Remain Untouched And Vehicle Stays Emissions Compliant. This Remains Distinct From The Axle Back Exhaust System that Is Located Behind The Rear Axle.

Product Features:

• Increases The Overall Sound Level And Performance
• Cat-Back(TM) Performance Exhaust System Replaces The Factory Exhaust System Following The Same Exhaust Path And Secured Using The Original Vehicle Hangars And Rubber Isolators
• Pioneered The Automotive Exhaust Aftermarket In Exhausts Constructed In Aircraft Grade 304 Stainless Steel Tubing, A Material With Higher Content Of Carbon And Nickel That Will Not Rust Or Corrode
• Easy Bolt-On Installation
• Aggressive S-Type Sound Under Acceleration, No Drone At Highway Speeds

PRO Series is the best performance exhaust system that money can buy. It is a series designed and built for the serious enthusiast who will settle for nothing less. Constructed from T304 stainless steel it delivers you optimal durability that keeps on looking its best. Easy to clean and maintain this is the product of choice for owners of lifted vehicles, show trucks or who operate in severe environments.

Product Features:

• 4 Inch Cat Back Single Side Exit (Street Version) Exhaust System
• 4 Inch Mandrel Bent Tubing
• Moderate Sound Level
• Bolt On, No Weld Design Makes Installation A No Hassle One And A Half To Two Hour Project
• Limited Lifetime Warranty

The new MACH Force XP exhaust is engineered to perform in the most extreme environments. This system is constructed from mandrel bent 4 in. 409 stainless steel tubing for maximum flow; increased horsepower; increased torque; and lower EGTs. MACH Force XP exhaust systems are the perfect combi nation of performance; fit; and value. All systems use factory mounting locations providing stability and hassle-free installation. High quality OE style band clamps are used for a complete 360 deg. sealing surface. A free-flowing 24 in. long muffler is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque out of your rig. OE style bayonet hangers are used to maintain a stable pipe location during high vibration and high heat conditions. The bayonet tip holds the hanger bushing in place for an OE style fit that does not change with time.

Product Features:

• 4 in. Mandrel Bent 409 Stainless Steel Tubing
• Maximum Flow
• High Flow Muffler
• Bayonet Style Hangers For Easy Installation

The aFe MACH Force-Xp cat-back exhaust system exceeds your quality and performance expectations. Mandrel bent 409 stainless steel tubing and high flow transverse muffler offers maximum exhaust flow and incorporates a factory style exhaust valve to control the exhaust note. The valve utilizes the factory valve motor and factory performance modes. When closed, it directs the exhaust through the high flow muffler for a smooth, tuned exhaust note. When opened, the exhaust is allowed to bypass the muffler and unleash sound and performance. Large diameter stainless steel exhaust tips come with a laser-etched aFe POWER logo for a stylish finish.

Product Features:

• Improved Flow And Durability
• Deep Aggressive Tone Muffler
• MIG Welded
• Hassle Free Installation

Made of 100 Percent heavy Gauge aluminized steel our Installer Series is designed to provide the cost conscious consumer with the same high quality design and craftsmanship as our other systems, but at a value price. Installer Series is suitable for areas with moderate environmental conditions. A performance exhaust system is much like a musical instrument. Quality engineering is important, hundreds of test Miles and hundreds of Hours are invested into every system to guarantee you the greatest sound. Durability and performance available from any exhaust system anywhere, and also provided with the free exhaust tip with this Installer Series.

Product Features:

• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• Made Of 100 Percent Heavy Gauge Aluminized Steel
• Designed To Provide The Cost Conscious Consumer With The Same High Quality Design And Craftsmanship
• Easy, Bolt-On Design, Makes Easy To Install

P Series from MBRP brings you the best of both worlds. Designed and constructed to the exact same specifications as MBRPs Pro Series you can expect the same improvements in torque and horsepower and the same awesome sound as our top of the line products. The difference is the heavy duty aluminized steel construction. You save money without compromising on performance. MBRP Installer Series truly is superior to other aluminized exhaust products on the market. Heavy sixteen gauge steel is one reason. Another is that our systems have a thick protective coating of aluminum silica on the seams – an area that is often left exposed to rust.

Product Features:

• P Series Cat Back System
• The Lowest Bend Degree Angles And Smooth Mandrel Bends Mean That Exhaust Gases Have An Easier Path To The Tip, Move Faster And Reduce Exhaust Gas Temperatures
• Vehicle Maintains Optimal Operating Temperatures
• Fits Right The First Time. Rigorous Testing Procedures Ensure That Every Component Will Fit As Expected
• Each Kit Is Designed To Fit As Many Configurations Of The Same Vehicle As Possible
• More Torque, More Horsepower, Improved Fuel Mileage And A Reduced Risk Of Pre-Mature Breakdown Or Lubricant Deterioration
• Easy, Bolt-On Design, Makes Easy To Install

Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.

Product Features:

• Reducer Flex-Tubes
• Reduces Backpressure
• Hardware Included
• Instructions Included

Designed to fit Hooker Competition header, Manifold or catalytic converter back applications. Cat-back kits install behind the converter and all other applicable emission control devices.

Product Features:

• Reducer Flex-Tubes
• Reduces Backpressure
• Hardware Included
• Instructions Included

The Street Series Black Performance Exhaust system delivers dyno proven power with a comfortable interior sound and performance exterior sound. Features Black coated tips.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

All CORSA exhaust systems are constructed from premium stainless steel to deliver lasting performance, sound and appearance. Easy bolt on installation. No welding needed. Proudly Designed, Engineered and Manufactured in Berea, OH.

Product Features:

• High Performance Sound
• Distinct Rumble At Idle
• Aggressive Sound Through The Gears
• Constructed From Premium Stainless Steel To Deliver Lasting Performance
• Easy Bolt On Installation
• Limited Lifetime Warranty

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit

System features BORLA(R) Polyphonic Exhaust Harmonizer which utilizes patented units that contain pipes of different diameters and lengths to create multiple exhaust notes that harmonize to deliver a clean, rich, full-bodied sound to the BORLA(R) mufflers. The mufflers then enhance this sound to the character and volume appropriate for our Touring, S-Type and ATAK(R) systems. This system features a black chrome finish on T-304 stainless steel tips. Using BORLA(R) Stainless Steel Polish pn 21461 is NOT recommended with these black chrome tips. We suggest cleaning the tips with hot water and a microfiber cloth. BORLA(R) Cat-Back(TM) Axle-Back exhaust systems feature patented straight-through and multi-core technology designed to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive BORLA(R) Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium T-304 stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA(R) stands behind every system with a Million-Mile Warranty.

Product Features:

• BORLA(R) Cat-Back(TM) Exhausts Feature, Straight Through And Multi-Core Technology To Unleash Hidden Horsepower
• Increased Exhaust Velocity Adds Power, Driving Excitement, Fuel Economy, And The Distinctive BORLA(R) Sound Of Power Respected By Motoring Enthusiasts Everywhere
• Each System Is Built From Aircraft Grade High Quality T-304 Stainless Steel, Superior To T-400 Series Knockoffs, To Give You The Absolute Best In Performance And Durability
• Ultra-Smooth Mandrel Bends Ensure Maximum Flow And Power
• Precision Computer Controlled CNC Manufacturing Ensures An Accurate Fit

The MagnaFlow Street Series Cat-Back Performance Exhaust System 19477 brings out the personality of your Truck with our signature resonant, powerful engine tone and dyno-proven performance. Thanks to its fast-flowing, mandrel bent 3in. main piping and 1 Straight-Through mufflers ending in a Quad Split Rear exit with 3.5in. Polished Welded-On Double Wall Angle Cut Folded Edge tips, this Truck exhaust kit has the performance chops to match its sporty sound and appearance. Upgrade your ride to the next level with an exhaust that has the pipes to put other Truck’s to shame. With this system your vehicle will be producing Aggressive exterior and Moderate interior sound levels while leaving other cars and trucks feeling envious at every stoplight. Exhaust kit 19477 features a cat-back layout that replaces your ride’s stock exhaust components from near the catalytic converter on back. Extensive 3D scanning during development has resulted in a direct-fit design that you can easily install yourself. 19477 is produced using CNC precision robotic manufacturing techniques and is backed by MagnaFlow’s 1-year limited finish warranty and limited lifetime construction warranty.

Product Features:

• Dyno-proven performance
• Durable corrosion-resistant stainless steel construction
• CNC precision robotic manufacturing techniques

All CORSA exhaust systems are constructed from premium stainless steel to deliver lasting performance, sound and appearance. Easy bolt on installation. No welding needed. Proudly Designed, Engineered and Manufactured in Berea, OH.

Product Features:

• High Performance Sound
• Distinct Rumble At Idle
• Aggressive Sound Through The Gears
• Constructed From Premium Stainless Steel To Deliver Lasting Performance
• Easy Bolt On Installation

Borla Performance Industries is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such “concours classics” as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today’s performance vehicles for the street, off-road, and racing.Borla is proud to offer a true “Made in the USA” product sold around the world. We are a company of motorheads, and it shows in our products, customer service, and culture. On weekends, the same Borla employees who built your exhaust or helped you with technical support can be found competing at tracks, drag strips, off-road events and car shows. Constructed using T-304 stainless steel for long life and sharp appearance, and features all welded construction for maximum durability. Unlike any other exhaust brand, Borla’systems are designed from scratch on a vehicle-by-vehicle basis. Every car or truck has unique mechanical and acoustical properties, all taken into account as we spend countless hours optimizing muffler body shapes, internal core configurations, flow dynamics,soundand more.

Product Features:

• Increased exhaust velocity adds power, driving excitement, fuel economy, and the distinctive powerful sound
• Each system is built from premium, high-quality austenitic T-304 stainless steel
• Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit