GMC G1500 Camshafts
Your GMC G1500 will be happy to know that the search for the right Camshafts you’ve been looking for is over! Advance Auto Parts has 9 different Camshafts for your vehicle, ready for shipping or in-store pick up. The best part is, our GMC G1500 Camshafts start from as little as $98.99.
When it comes to your GMC G1500, you want parts and products from only trusted brands. Here at Advance Auto Parts, we work with only top reliable Camshafts brands so you can shop with complete confidence. Some of our top Camshafts brands are Competition Cams and Edelbrock. We’re sure you will get the right product to keep that G1500 running for a long time.
Shop online, find the best price on the right product, and have it shipped right to your door. If you prefer to shop in person for the right Camshafts for your G1500, visit one of our local Advance Auto Parts locations and you’ll be back on the road in no time!
Compare 16 GMC Camshafts
Competition Cams – Xtreme Energy 236/242 Hydraulic Roller Cam for Chevrolet Small Block (Part No.12-433-8)
from
$522.99
HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.
Product Features:
See More
Product Features:
- HYDRAULIC ROLLER – Xtreme Energy Retro-Fit: Street/strip applications, 9:1+ compression, intake, headers, 2800+ stall, gears.
- 288/294 Advertised Duration, 236/242 Duration @ .050″, .520″/.540″ Lift, 110 Lobe Separation
- Valve spring upgrade required
Competition Cams – CAMSHAFT, SBC 295 BIG MUTHA THUMPR HYDRAULIC 1 EA (Part No.12-602-4)
from
$529.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – CAMSHAFT, SBC 284 XTREME ENERGY HYDRAULIC 1 EA (Part No.12-250-3)
from
$258.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Edelbrock – Rollin’ Thunder Camshaft for 1987-Later Small-Block Chevy 265-350 V8 (Part No.2209)
from
$566.99
Edelbrock Rollin’ Thunder Camshaft #2209 is designed for 265-350 Chevy V8 engines from 1987-Later and produce optimum torque from the low-end to the mid-range. Rollin’ Thunder camshafts should be matched with Performer manifolds for vehicles operating fro
See More
Competition Cams – CAMSHAFT, BBC 282 XTREME ENERGY HYD ROLLER 1 EA (Part No.11-432-8)
from
$547.99
Featuring a quicker valve opening, the Xtreme Energy camshaft profile provides increased responsiveness and more area under the lift curve than older, slower grinds. Designed to increase performance without sacrificing driveability and creature comforts,
Product Features:
See More
Product Features:
- Excellent performance in street carbureted applications.
- More vacuum allows an increase in duration for improved performance and assists power brakes.
- Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve.
- Best performance with aftermarket intake manifolds, headers, lower gear ratios etc.
Competition Cams – Thumpr 227/241 Hydraulic Flat Cam for Chevrolet Big Block 396-454 (Part No.11-600-4)
from
$542.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Competition Cams – CAMSHAFT, GM LS 275 XFI RPM HI LIFT HYD ROLLER 1 EA (Part No.54-426-11)
from
$533.99
Designed to take advantage of the GM LS engine’s larger camshaft journal diameter, the XFI RPM camshaft line takes Xtreme Energy technology to deliver excellent power. Without sacrificing low RPM torque, these camshafts extend the RPM potential of GM LS e
Product Features:
See More
Product Features:
- Designed with Xtreme Energy technology to provide excellent power with the LS engine’s enhanced cylinder head design and high RPM potential.
- Takes advantage of the LS engine’s larger journal diameter, base circle and 1.7+ rocker arm ratio.
- Provides outstanding low RPM torque with increased stability.
Edelbrock – Rollin’ Thunder Camshaft for Chevy 4.3L 90 Deg V6 (Part No.3714)
from
$528.99Product Features:
- Designed for Optimum Torque and Acceleration
- Maximum Performance From Idle through Mid-Range
- Matched to Edelbrock Performer Intakes
- Includes Hydraulic Lifters and Assembly Lube
- Major Improvement in Throttle Response and Torque
- Use For Daily Drivers/Trucks/Vans/RVs/4x4s
- Take The Guesswork Out Of Camshaft Selection
Edelbrock – Rollin’ Thunder Camshaft for 1965-95 B/B Chevy 396-502 (Mark IV/Gen V) (Part No.2261)
from
$528.99
Designed for 1500-6500 performance. Maximum power in high-RPM with good low-end torque. Matched to Edelbrock performer RPM intakes. 10 to 12 inches of manifold vacuum at idle. More lift and duration than most street camshafts. Dyno matched and street proven performance. Take the guesswork out of camshaft selection! Use only stock ratio Rocker Arms.
Product Features:
See More
Product Features:
- Designed for 1500 to 6500 Performance
- Maximum Power in High-RPM with Good Low-End Torque
- Matched to Edelbrock Performer RPM Intakes
- 10 to 12 in. of Manifold Vacuum at Idle
- More Lift and Duration than Most Street Camshafts
- Dyno Matched/Street Proven Performance
- Take The Guesswork Out Of Camshaft Selection
- Use Only Stock Ratio Rocker Arms
Competition Cams – CAMSHAFT, SBC 291 MUTHA THUMPR HYDRAULIC ROLLER 1 EA (Part No.12-601-8)
from
$522.99
Designed to deliver an aggressive, hard-hitting exhaust note at idle, the Thumpr camshaft series from COMP Cams also delivers excellent horsepower gains and a broad torque curve. A perfect choice for muscle cars and street rods, the Thumpr series’ early i
Product Features:
See More
Product Features:
- Early intake valve opening and long exhaust duration create optimum overlap for powerful, hard-hitting exhaust note.
- Best with aftermarket converters and more rear gear.
- Three unique cam designs for each application that deliver excellent horsepower gains and broad torque curve; perfect choice for muscle cars and street rods.
Edelbrock – Rollin’ Thunder Camshaft for 1957-86 Small-Block Chevy 283-400 V8 (Part No.2201)
from
$441.99
Product Features:
See More
- Hydraulic roller tappet style camshaft
- Reduces friction and eliminates break-in problems
- Reduces friction and eliminates break-in problems
- Permit higher valve velocities for increased performance
- Maintains good manifold vacuum and drivability
Edelbrock – Rollin’ Thunder Camshaft for 1987-Later 283-400 Non LT1 / Non Gen III (Part No.2204)
from
$413.99
Product Features:
See More
- Ideal for street high performance and racing applications
- Use stock ratio rocker arms only
- Use stock ratio rocker arms only
- Basic operating RPM range is between 1, 500-6, 500 RPM
- Use with Edelbrock aftermarket cylinder heads, adjustable valve-train components and 9. 5: 1 compression ratio
Competition Cams – CAMSHAFT, BBC 280 MAGNUM HYDRAULIC 1 EA (Part No.11-202-3)
from
$235.99
Ideal for use with mainly stock components like rocker arms, intake manifolds, cylinder heads, compression ratio, torque converters and rear gear ratios, the High Energy camshaft grind family is a great choice for street performance applications. Offering
Product Features:
See More
Product Features:
- Good blend of efficiency and performance.
- Perfect choice for performance street rebuilds.
- Work well with mainly stock components such as rockers, manifolds, heads, compression, torque converters and gears.
Sealed Power – Performance Camshaft (Part No.CS-1106R)
from
$179.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Reliable performance with significant power increase vs stock
- Good low-end torque
- Recommended for tow vehicle, street rod or muscle car
- Power range: 1000-3500rpm
- Idle: stock
- Cruise: 1600-2200rpm
Sealed Power – Performance Camshaft (Part No.CS-1014R)
from
$98.99
Speed-Pro delivers the power you need and the value and quality that you deserve. Whether you are running at the track, chasing trophies on the strip, or just cruising down the road, count on Speed-Pro to provide the best value in HP engine components
Product Features:
See More
Product Features:
- Reliable performance with significant power increase vs stock
- Good low-end torque
- Recommended for tow vehicle, street rod or muscle car
- Power range: 1000-3500rpm
- Idle: stock
- Cruise: 1600-2200rpm
Sealed Power – Engine Camshaft (Part No.CS-774)
from
$72.99
Sealed Power® parts provide innovative designs, use leading edge materials and utilize ISO & QS certified manufacturing in order to deliver top quality products that meet the rigorous demands of today’s modern engines.
Product Features:
See More
Product Features:
- Meets or exceeds OEM specs
- Original equipment performance
- Idle: Stock
- Latest high quality materials
- Precision machining
- Made in USA
FAQs for GMC G1500 Camshafts
What are the most popular Camshafts for the GMC G1500?
With 3 brands you can trust, our most popular Camshafts for the GMC G1500 are:
from
$522.99
This product is not rated
Xtreme Energy 236/242 Hydraulic Roller Cam for Chevrolet Small Block
Camshafts
Find Your GMC G1500 Camshafts by Year
People also search Advance Auto for these popular years of GMC G1500 parts:
