GMC Envoy XL Ignition and Tune-Up Products

ACDelco GM Original Equipment Spark Plug Wires consist of a single wire, encased in an insulating material, connectors, and insulating boots, and are GM-recommended replacements for your vehicle’s original components. The wires transfer high voltage pulses between the voltage source, the distributor, and the spark plug. These original equipment wires have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Durable to help transfer high voltage pulses without damage
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

All ignition system accessories are application matched components designed to restore your original ignition system to like new condition.

Product Features:

• Application matched component to ensure the system can be returned to like new condition.
• Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

This ignition knock (detonation) sensor seal is designed to match the fit and function of the original seal on specified vehicles, and is engineered for durability and reliable performance.

Product Features:

• Direct replacement – this ignition knock (detonation) sensor seal is designed to match the fit and function of the original seal on specified vehicles
• Restores functionality – reliable replacement for an original part that is leaking or has failed due to fatigue
• Durable construction – this part is made from quality materials to ensure reliable performance and long service life
• Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

ACCEL now offers the cure for burnt spark plug wire boots with Extreme 9000 Ceramic Wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. The ceramic boots will withstand up to 2,000 degrees F. If you are running headers with close tolerances, have an engine bay with little room or an RV with boots that melt because of heat, these wire kits are the answer for burnt and melting boots. The wire uses a 500 Ohms/ft Ferro-Spiral core developed for performance use. It provides excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. The Extreme 9000 Ceramic Wires also feature stainless steel spark plug terminals for maximum spark energy to the plugs.

Product Features:

• 500 Ohms/ft Of Resistance
• 600 F Rated Silicone Jacket
• Stainless Steel Plug Terminals
• RFI Suppression For Street Driven Applications
• Custom-fit Universal And Import Coverage
• Pre And Post HEI Vehicles
• Ceramic boots withstand up to 2,000░ Fahrenheit
• Ceramic boots withstand up to 2,000° Fahrenheit
• 8mm double silicone construction black wire rated at 600░ F rated
• 8mm double silicone construction black wire rated at 600° F rated
• 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
• Universal and custom fit applications

ACDelco GM Original Equipment Spark Plug Heat Shields help protect the spark plug insulator and plug wire boot from the heat of the exhaust manifold, and are GM-recommended replacements for your vehicle’s original components. These original equipment heat shields have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Helps protect spark plug boot from cracking and deteriorating from heat
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

ACDelco GM Original Equipment Iridium Spark Plugs are designed, engineered, and tested to rigorous standards, and are backed by General Motors. They are our latest in spark plug technology and an exact replacement for your vehicle’s original components. Iridium composition provides a high melting point and great strength, and provides excellent wear resistance and durability. ACDelco GM Original Equipment parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional.

Product Features:

• Iridium is the latest in spark plug technology and is an exact replacement for vehicles’ original components
• Iridium composition provides a high melting point and great strength, helps to provide excellent wear resistance and durability
• Iridium offers excellent engine idle stability, reliable cold starting, quick acceleration and smooth performance
• Three Piece Fired in Suppressor seal meters spark energy for long electrode life, helps prevent combustion leakage and helps block radio frequencies that can affect vehicle electronics
• Iridium plugs are laser-welded which provides precision welds, reduces excess debris and wear rate, thus increasing durability
• Some ACDelco GM Original Equipment parts may have formerly appeared as GM Genuine Parts (OE) or ACDelco Professional
• ACDelco GM Original Equipment parts are designed, engineered and tested to rigorous standards, and are backed by General Motors.
• GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
• GM regularly updates production and service part designs to integrate new materials and technologies

ACCEL now offers the cure for burnt spark plug boots with Extreme 9000 Ceramic wire kits. The 8mm Ferro-Spiral core wire now has ceramic boots on the spark plug end of the wires. Ceramic boots withstand up to 2,000 degrees. Great for running headers with close tolerances, an engine bay with little room, or an RV with boots that melt because of heat. Ultra high-temperature double silicone construction wire rated at 600 degrees Fahrenheit peak. 500 ohms/ft Ferro-Spiral core developed for performance use. Excellent energy delivery to the spark plugs, while providing the highest level of RFI/EMI suppression. Stainless steel spark plug terminals for maximum spark energy to the plugs. Pre-made to factory lengths for a perfect fit. In addition to 1997-2015 Gen 3/4 LS, also a direct fit for Gen V GM engines: 2015-2016 Cadillac Escalade 6.2L 2016 Chevrolet Camaro 6.2L 2014-2016 Chevrolet Corvette 6.2L 2015-2016 Chevrolet Corvette Z06 6.2L 2014-2016 Chevrolet Silverado 1500 4.3L/5.3L/6.2L 2015-2016 Chevrolet Suburban 5.3L 2015-2016 Chevrolet Tahoe 5.3L 2014-2016 GMC Sierra 1500 4.3L/5.3L/6.2L 2015-2016 GMC Yukon 5.3L/6.2L

Product Features:

• Total length= 12″
• Straight Spark Plug Boot
• Black Ceramic boots withstand up to 2,000░ Fahrenheit
• Black Ceramic boots withstand up to 2,000° Fahrenheit
• 8mm double silicone construction black wire rated at 600░ F rated
• 8mm double silicone construction black wire rated at 600° F rated
• 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression
• Stainless Steel Plug Terminals

BWD is an aftermarket leader, providing a premium line of engine management products. BWD manufactures and distributes high technology critical components for late model domestic and import vehicles. BWD is constantly evolving to give customers the competitive edge they need to compete in today’s ever-changing marketplace.

Product Features:

• Our Canister Purge valves meet or exceed original equipment specifications, providing confidence in every box
• Featuring industrial grade materials for robust performance
• Decades of industry leading research and development focused on meeting the technician’s needs
• With industry leading expertise, when original equipment fails our products are designed to fix the inherent failure issues
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

• Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• WVE electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.
• Product constructed to meet all design and operating characteristics as intended by the manufacturer.
• OE specified wire gauge to ensure a reliable electrical connection
• Designed to meet or exceed OE specifications in form, fit and function

ACDelco GM Original Equipment Pigtail Connectors are connectors ready to be spliced into vehicle harnesses, and are GM-recommended replacements for your vehicle’s original components. These original equipment pigtail connectors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Protective outer coverings help provide long-lasting durability
• Color-coded wires allow for easy installation
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

MSD Street Fire coils will improve the performance of your late model GM or Ford vehicle. The E-core dual connector and TFI coils feature epoxy-filled construction and 48,000 maximum volts. They mount directly in place of the factory coil and accept the factory connectors for an easy installation.

Product Features:

• Increased Spark Energy Over The Entire RPM Range Of The Engine
• Coils Bolt In Place Of The Factory Units
• Accepts OEM Connections For A Simpler Installation

Coils

Upgrade your vehicle with ZEVO® LED miniature bulbs for added style, performance, and the many benefits of LEDs. Instantly enhance the interior and exterior lighting applications of your vehicle with a modern bright white light for head-turning style and increased visibility by other motorists. Easy-to-install with a robust design and high-quality components, ZEVO replacement bulbs are backed by a limited warranty to provide exceptional performance through the life of the vehicle. Also available in an array of colors to update your car or truck.

Product Features:

• HIGH EFFICIENY: Delivers greater clarity with less power consumption and longer bulb life when compared to standard incandescent bulbs
• RELIABLE: Thermal management to maximize life, matched with robust design that withstands temperature and shock for optimal performance
• NON-POLARITY DESIGN: Plug & play easy installation; SYLVANIA ZEVO LED bulbs light on two sides and can be installed either direction
• INSTANT ON: Provide full brightness instantly, giving drivers around you more time to react, compared to the slower light-up with Incandescent bulbs
• BRIGHT WHITE LIGHT: Ideal for use in Daytime running lights (DRL), back up/reverse, map, dome, trunk, cargo and license plate light bulb replacement
• HYPERFLASH: For some vehicles, installing a load equalizer may be required to eliminate hyper flash or dashboard error messages
• EASY DIY INSTALLATION: A direct replacement for the factory bulbs in your vehicle, no modification required
• SMART MAINTENANCE: Always replace bulbs in pairs to ensure equal brightness and color.
• SAFETY: High-quality SYLVANIA bulbs are designed to perform to all relevant safety standards set for the lighting application.
• TRUSTED BRAND: SYLVANIA is a trusted OEM automotive lighting manufacturer, with over 100 years of superior optical engineering experience

The Ignition Knock (Detonation) Sensor monitors vibrations caused by engine knock or detonation to alter the ignition timing and prevent detonation. A piezoelectric crystal generates a varying voltage based upon engine vibration intensity to delay ignition timing to help prevent severe and costly engine damage. Reasons for replacement include check engine light illumination, engine hesitation, poor fuel economy or failed emissions test.

Product Features:

• ADVANCED TECHNOLOGY: Manufactured to operation performance standards to meet or exceed OE fit, form, and function to ensure proper ignition timing.
• INSTALLATION AND SUPPORT: Mounting threads, harness length and wire gauge match OE for easy, worry free installation.
• THE DIFFERENCE: Reinforced components are used to reduce the chance of part failure and prevent corrosion and moisture penetration. Shielded harness prevents electrical interference.

Ignition Knock (Detonation) Sensors monitor the engine for pinging or spark knock, and are GM-recommended replacements for your vehicle’s original components. These sensors create a voltage signal based on the vibrations caused by erratic air/fuel mixture combustion; the engine control module uses these signals to adjust the ignition timing and air/fuel mixture. These original equipment ignition knock sensors have been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• Sends signals to the engine control module (ECM) to adjust timing
• Helps prevent damage to the engine caused by pre-ignition
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

An ACDelco GM Original Equipment Ignition Coil is a GM-recommended replacement for your vehicle’s original component, and undergoes more stringent testing than aftermarket products. It increases electrical system voltage to help ignite the airfuel mixture as the starting and charging system starts the engine, maintains the battery’s charge, and provides power to the electrical accessories while the engine is running. An ACDelco GM OE Ignition Coil uses pure copper windings to improve durability and provide higher resistance to internal shorts and dielectric breakdown. Because the number and shape of the laminations determine the output characteristics of an ignition coil, ACDelco ensures that the silicone steel plates surrounding the coil correctly match the original part size and number. Since steel laminations work best when they are new, shiny, and clean, ACDelco laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed. This original equipment ignition coil has been manufactured to fit your GM vehicle, providing the same performance, durability, and service life you expect from General Motors.

Product Features:

• High quality coated windings to improve durability and provide protection against internal shorts and dielectric breakdown
• Silicone steel plates surrounding the ignition coil correctly match the original part size and number exactly
• Laminations are coated to hinder corrosion and many feature molded plastic protection to help ensure that nothing is exposed
• GM-recommended replacement part for your GM vehicle’s original factory component
• Offering the quality, reliability, and durability of GM OE
• Manufactured to GM OE specification for fit, form, and function

NGK ignition coils are manufactured to meet or exceed OE standards for the highest durability and operational performance, so they can be installed with confidence. NGK and their family of automotive products have over 80 years’ experience and are driven by extreme dedication to innovation, performance and quality. With state-of-the-art manufacturing, inventory and distribution facilities in North America and globally, NGK is dedicated to providing customers with world-class products and services. Developed and rigorously tested in our ISO 17025 accredited test lab under the most extreme conditions, NGK’s coil designs will outperform all others – far beyond operational environments a vehicle would actually experience. NGK ignition coils have vast coverage including late-model domestic and import vehicles. NGK’s OE legacy, unsurpassed quality and leading vehicles in operation coverage reinforces NGK as The Ignition Specialist.

Product Features:

• OE QUALITY: Vacuum-sealed premium epoxy resin and thermoplastic coil housings provide superior dielectric strength, voltage insulation and durability
• OPTIMAL PERFORMANCE: Precision coil windings and laminations maximize outputs, custom NGK ASIC chipset optimizes efficiency, prevents component damage
• EASE OF INSTALLATION: NGK Ignition Coils include ignition control module, premium high temperature coil boot, and jumper harnesses where required
• THE NGK DIFFERENCE: Featuring superior materials and design enhancements
• EXTENSIVE TESTING: NGK ignition coils must pass extreme testing during manufacturing to ensure the highest quality and durability standards are met
• PRODUCT ENGINEERING: Advanced flow and stress modeling systems preemptively identify and avoid common failure points found in OE and competitor coils

High-quality products that meet OE appearance and performance to provide professional technicians and DIYers with a cost-effective solution.

Product Features:

• Designed to OE standards for ease of installation
• Copper alloy conductors ensure superior electrical conductivity with low resistive losses
• Our parts are 100% tested to verify both mechanical and electrical switching performance
• Robust design and high grade materials meet the stringent demands of today’s service professional
• BWD is a global manufacturer of original equipment ignition products, complete quality control is maintained through the manufacturing process from componentry to finished product

Carquest Premium Vehicle Solutions provides high-quality solutions for a wide range of applications. The Ignition Switch allows for reliable control of the vehicle’s electrical systems and engine start-up, enhancing convenience and ensuring consistent performance during operation. Engineered for maximum performance and durability, our products are built to excel in even the most demanding conditions, ensuring reliable operation and long-lasting value.

Product Features:

• Durable Construction: Designed with high-quality materials to withstand harsh environmental conditions, ensuring long-lasting performance in extreme temperatures, vibrations, and moisture exposure.
• Precision Engineering: Accurate sensing and switching capabilities provide reliable performance, reducing the risk of malfunctions and improving vehicle safety and efficiency.
• Easy Installation & Maintenance: Designed for quick installation and minimal upkeep, reducing downtime and repair costs for both manufacturers and consumers.
• Fit/Form/Function: Each vehicle electronic component is engineered to meet or surpass OEM standards, ensuring precise fit, optimal functionality, and reliable performance.

Product Features:

• PREMIUM GRADE SILICONE: Designed to withstand harsh environments
• OEM MATCHED: Includes all required internal springs and ferrite resistors for superior performance and RFI noise suppression
• LIMITED WARRANTY: See package for details

Do you have problems cooking the spark plug wires on your LS based race engine? Do you need that extra assurance of not having a misfire due to a burnt spark plug wire during a race? If you answered yes to any of the previous questions, ACCEL has the wire set for you. ACCEL Extreme 9000 Ceramic Boot Wires feature ultra high-temperature, double silicone, 8mm, 500 ohms/ft Ferro-Spiral core wire developed for performance use. The wire is rated at 600 degrees Fahrenheit peak and the Ceramic boots withstand up to 2,000 degrees. These race wires also feature Mr. Gasket Inferno Shield Thermal Sleeving to increase the heat resistance of the wire to 1200 degrees Fahrenheit. The Inferno shield is held in place with a high temp heat shrink so you do not have to worry about the shielding moving. Great for running headers with close tolerances, an engine bay with little room or an application with high under-hood temps due to extreme racing conditions. ACCEL Extreme 9000 wires offer excellent energy delivery to the spark plugs through stainless steel spark plug terminals, while providing the highest level of RFI/EMI suppression.

Product Features:

• 500 Ohms/ft Of Resistance
• Stainless Steel Plug Terminals
• RFI Suppression
• Inferno Shield sleeving increases wire heat resistance to withstand 1200░F
• Inferno Shield sleeving increases wire heat resistance to withstand 1200°F
• Ceramic boots withstand up to 2,000░ Fahrenheit
• Ceramic boots withstand up to 2,000° Fahrenheit
• 8mm double silicone construction black wire
• 500 Ohms/foot ferro sprial core offers the highest level of RFI/EMI suppression

Product Features:

• SAEJ2031 Class E cable resist heat (428 Deg. F), cold (-104 Deg. F), electrical interference, abrasion and oil.
• Stainless steel magnetic winding delivers maximum voltage to the spark plug for more powerful, and longer spark resulting in optimum engine performance while reducing the chance for misfire, and eliminating radio static.
• 100% Pure silicone external insulation resists oil penetration, for lifetime protection against wire set failure.
• EPDM inner insulation stops power-robbing voltage leaks.
• With Magnetic-impregnated Kevlar internal conductors – durable and break resistant
• Engineered to meet OEM tolerances using variable pitch wire winding, creating better resistance to electric magnetic interference (E.M.I resistance).
• Excellent interference suppression and consistent performance
• Easy lock terminals for more convenient installation.
• Thick silicon outer jacket for excellent heat resistance. Insulating EPDM based compound inner jacket helps minimize voltage drop and enhance durability.
• Broad coverage available for most vehicles on the road today
• Include grease pack to ensure easy installation and removal

Check engine light on and vehicle running rough? Could be a failed knock sensor. This ignition knock sensor kit combines both necessary sensors and the wiring harness that joins them for a complete repair in one package.

Product Features:

• Complete solution – this knock sensor kit includes two knock sensors and the wiring harness that connects them
• Plug-and-play installation – matches original wiring harness, requiring no cutting or splicing
• Quality assured – benchmarked against original components for performance and quality
• Excellent value – original equipment quality at significant cost savings