from

$41.99

New Platinum Pro Fuel Tank Straps

Product Features:

25 Gallon
Meets All Federal Motor Safety Standards
No Drilling Needed For Installation
No Modifications Needed For Installation
Direct Fit Replacement For Your Vehicle
Same Form Fit And Function As OE
Check Out The Large Selection Of Parts Available For Your Vehicle

from

$22.99

Manufactured with OEM quality materials and safety standards by an OE Supplier. Manufactured to pass all state and federal emissions requirements. Specifically designed pressure and vacuum relief valves to prevent evaporation of fuel. A leaking fuel cap can allow up to 30 gallons of gasoline to evaporate over the period of a year.

Product Features:

Protects your fuel from theft and vandalism
Passes all state and federal emissions tests
Manufactured from durable, long-life materials
Reduces air pollution with proper sealing and venting
Independently tested for emission control
Independently tested for emission control

from

$13.99

This Spectre Fuel Pump Mounting Plate for short block Chevrolet engines comes with a gasket, four bolts and four washers. It is used to mount mechanical fuel pumps. It is also triple chrome plated.

Product Features:

Small block Chevrolet, use for mounting mechanical fuel pumps
Includes mounting plate gasket
Includes chrome mounting bolts with washers
Triple chrome plated

from

$1.49

The EGR system is an emission control device designed to recirculate exhaust gas into the engines air intake system and back to the combustion chamber to control nitrogen oxides or NOx. The chemical NOx is created when oxygen and nitrogen are heated above 2,800-degree F. Exhaust gas, or gas that is displaced from the combustion chamber, contains little to no oxygen molecules. By recirculating this gas back into the combustion chamber fewer oxygen molecules are available for the combustion event which will therefore create a cooler combustion event. The EGR valve can be actuated by engine vacuum or electronically by the engine control module.

Product Features:

Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.
Our EGR valves are designed to match the vehicle specific exhaust gas flow rate as designed by the engine manufacturer to provide clean tail pipe emissions.
Feedback EGR valves and pressure sensors contain a robust circuit board design which increases durability due to heat, shock, and random electro-magnetic pulses (EMP) and power spikes.
100% thermo-shock and vibration tested to ensure superior performance in extreme conditions.
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.

from

$14.49

Precision cut to cover stock fuel pump opening when converting to an electric fuel pump. Gasket included.

Product Features:

Chrome Plated Steel
Comes With Gasket
Easy Installation

from

$73.99

Product Features:

Reducer With O-Sensor Fitting
Made In USA

from

$33.99

Carquest Premium mechanical fuel pumps are engineered by Carter Fuel Systems or Agility Auto Parts to meet or exceed Original Equipment (OE) specifications for fit, form and function. Every mechanical fuel pump is 100% tested throughout the entire manufacturing process for worry-free performance. Carquest Premium mechanical fuel pumps include the installation gaskets needed for each application. Carquest Premium mechanical fuel pumps are engineered with superior quality components to provide the longest life and reliable performance

Product Features:

Meets or exceeds OE specifications for fit, form and function
Special heat-treated rocker arms and case-hardened pins to ensure lasting performance
All fuel pumps are 100% performance tested
Includes installation gaskets or seals where applicable

from

$182.99

Innovative engineering, manufacturing technology and quality control ensure that Spectra Premium fuel tanks meet or exceed the performance of the original equipment they replace.

Product Features:

Unit is designed to OE fit, form and function requirements accomplished by leveraging our OE fuel system design expertise
Lock ring included with each tank to reduce installation time and to ensure a complete repair
Made with corrosion resistant, OE approved, Ni Terne steel for durability
Unit is leak tested after production to ensure product in free from fuel and / or evaporative leaks
Each new fuel tank is road tested to ensure real world performance and to verify that each design meets our high standards for quality
Engineered to stringent tolerances based on our Canadian engineers’ in-depth knowledge of the OE part it’s designed to replace
Fit tested on the very same vehicle application for which it was developed verifying first-hand that the design fits properly and can be easily installed
Packaged with double-layered foam wrap and heavy-gauge corrugated board to ensure product quality at installation

from

$3.99

Fel-Pro gaskets are specifically designed for the repair environment to deliver a reliable seal on even the most troublesome applications. Designed for imperfect sealing surfaces and manufactured with proprietary materials, you can count on Fel-Pro for innovative sealing solutions for the real-world repair environment.

Product Features:

Meets or exceeds all original equipment specifications
Application specific design to ensure a perfect fit
Engineered and manufactured specifically for the repair environment
Unsurpassed quality you can trust
Includes all parts needed to complete the repair

from

$2484.99

The Edelbrock Pro-Flo 4 EFI Kit No. 35830 for Big-Block Chevy Oval Port engines is equipped with the latest in technology and features.

Product Features:

The EFI system comes complete with a traditional 4150-Style single plane intake manifold and 35 Lb/Hr injectors capable of 550 HP with 58 p.s.i.fuel pressure
Also included is a plug and play single connection distributor designed to work specifically with Pro-Flo 4 and a made in the USA fully terminated high-quality harness with clearly labeled connections to ensure a hassle-free installation
The new Pro-Flo 4 EFI systems feature an all-new ECU with a faster processor, a water proof design and measures half the depth of the previous ECU
It also has an upgraded Bluetooth chip that is faster, more reliable and will not drop connection
We’ve added more features for the advanced tuner giving you control over air-fuel ratios, ignition curve, idle speed, acceleration fuel, coolant fans, Rev limiter while retaining the simplicity Pro-Flo is known for
The key to the system is our exclusive E-Tuner 4 app with dyno developed base calibrations
The E-Tuner 4 app uses a Bluetooth wireless connection to communicate with the ECU’s self-learning capability to continually adjust the calibration to get the maximize performance
E-Tuner 4 features a simple and easy to use setup wizard to help you get started as well as multiple dash displays so you can monitor your engines vitals
The exclusive Edelbrock E-Tuner 4 app is Free and Available for Android and IOS based smart phone or tablet

from

$73.99

Carquest Premium exhaust gas recirculation (EGR) valves are designed to perform in harsh engine environments and meet or exceed original equipment (O.E.) specifications. Our Carquest Premium EGR valves are built by manufacturers that meet IATF 16949 certified framework, an internationally recognized proof of quality in the automotive industry. Carquest Premium EGR valves undergo extensive validation testing to ensure long-lasting performance and reliability. Carquest Premium EGR valves are part of our Carquest Vehicle Solutions, which is a full line of engine management and electronics products that help control ignition, fuel delivery and emission systems. Carquest Vehicle Solutions are OE-quality parts designed, engineered and tested by world-class manufacturers to ensure a reliable and long-lasting repair.

Product Features:

Designed to meet or exceed OE specifications for fit, form and function
Precision engineering and robust design to withstand harsh under hood environment
Gaskets or seals are included if required for installation
Extensive design validation testing and 100% end-of-line tested
Where applicable stainless-steel sleeves used over cold rolled sleeves providing smooth EGR pintle operation under all operating conditions.
Carquest Vehicle Solutions Technical Support available from ASE certified technicians: 1-866-687-5413

from

$88.99

Product Features:

EGR Adapter
Clears OEM Intake
Includes Gaskets and Bolts

from

$35.99

Product Features:

EGR Adapter
Clears OEM Intake
Includes Gaskets and Bolts

from

$19.79

Modern vehicles may have 100 or more electrical harness connectors in every operating system of the vehicle. Terminal tension may weaken with time or corrosion may occur within the connector housing making replacement necessary. When replacing any harness-connector assembly approved wire termination methods must be followed to ensure a successful and long-term solution to the original problem is made. A failed terminal connection, terminal corrosion or damaged wire will result in an electrical system fault.

Product Features:

Carquest electrical connectors meet or exceed OE wire gauge, insulation, and terminal material requirements.

from

$12.49

When replacing a fuel pump or module, it’s extremely important to clean the tank. Existing dirt, debris, and contamination stuck in the fuel tank can clog the brand-new strainer. Delphi’s Fuel Tank Cleaning Kit (FC01) and Tool (FC02) can help clean your fuel tank in less than five minutes. The FC01 includes a low-suds solution, cloth, and gloves that works together with the FC02 to help clean those hard to reach places without having to remove the fuel tank. Visit our Resource Center for helpful tips and tricks on fuel pumps, technologies, and more: https://www.delphiautoparts.com/usa/en-US/resource-center.

Product Features:

Helps avoid premature fuel pump failure
Lint free towel included
Low suds formulation
Removes harmful contaminants from the fuel tank

from

$39.99

The Secondary Air Injection system is an emission control device designed to pump fresh air into the engine exhaust system to reduce harmful emissions. The Air Injection Pump Check Valve will allow air flow in one direction only to prevent an engine back-fire condition.

Product Features:

Application matched component to ensure the system can be returned to like new condition.
Product constructed to meet all design and operating characteristics as intended by the vehicle manufacturer.

from

$16.99

Carquest Premium fuel pump tank seals are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel pump tank seals covering a wide variety of North American vehicle applications. Carquest Premium fuel pump tank seals are engineered to meet or exceed all OEM specifications.

Product Features:

Engineered to meet or exceed all OEM specifications.
Precision stamped and are treated with a rust proof finish to ensure durability and strength

from

$28.99

Stock fuel pump pushrods leave a lot to be desired. In fact, they have been known to break at the most inopportune time. To provide you with required reliability and improved performance, ARP has developed these sophisticated and durable pushrods. they are made from premium grade aerospace chrome moly and center less ground to precise diameter. A hollow core serves to reduce the reciprocating mass, which requires less energy to operate. The less drag on the motor, the more power available to you

Product Features:

Made From Premium Grade Aerospace Chrome Moly
Center Less Ground To Precise Diameter
Hollow Core Serves To Reduce The Reciprocating Mass, Which Requires Less Energy To Operate
Provide With Required Reliability And Improved Performance

from

$222.99

All Edelbrock fuel rails are machined from high quality extruded aluminum. Each kit includes fuel rails, stands and mounting hardware. Fuel fittings, crossover line and regulator not included. 3627 Small-Block Chevy fuel rail kit is for use with Pro-Flo X

Product Features:

Black AnodizedFinish
High Capacity Fuel Rails
For Use W/ Pro-Flo XT Manifold #7137
-6 AN Inlet / Outlet
Made In The USA

from

$9.99

CARQUEST lock rings are designed to positively seat the fuel pump in proper position inside the tank. These precision stamped rings are made from corrosion-resistant and durable metals for long life.

Product Features:

Precision stamped for perfect fit and pump position
Always replace lock ring as a part of fuel pump service

from

$10.99

Carquest Premium fuel tank lock rings are built by Carter Fuel Systems and Agility Auto Parts, industry leaders in high-quality fuel system components. Carquest Premium offers a complete line of fuel tank lock rings covering a wide variety of North American vehicle applications. Carquest Premium fuel tank lock rings are engineered to meet or exceed all OEM specifications. Carquest Premium fuel tank lock rings are precision stamped and are treated with a rust proof finish to ensure durability and strength.

Product Features:

Engineered to meet or exceed all OEM specifications.
Precision stamped and are treated with a rust proof finish to ensure durability and strength.

from

$27.99

This vacuum reservoir is designed to match the fit and function of the original part on specified vehicles. Made of quality materials, it is engineered for reliable performance.

Product Features:

Direct replacement – this vacuum reservoir is designed to match the fit and function of the original part on specified vehicles
Ideal solution – this reservoir is a reliable replacement for an original part that is missing or damaged
Durable construction – this part is made from quality materials to ensure reliable performance and long service life
Trustworthy quality – backed by team of product experts in the United States and more than a century of automotive experience

from

$102.99

The electronic universal fuel tank selector is a two-way valve designed to direct fuel from a single tank when commanded, on a dual fuel tank vehicle application. With aid from an electrical switch located inside the vehicle cabin, the vehicle operator can select one of two fuel tanks to provide fuel to the vehicle’s engine. When electrically connected correctly, the selector valve will also provide the fuel level sender signal from each fuel tank onto the instrument cluster fuel gauge.

Product Features:

Product constructed to provide long-life operation
6 Ports
Universal
Includes: Selector Valve, Toggle Switch and Pigtail Connector

from

$173.99

The electronic universal fuel tank selector is a two-way valve designed to direct fuel from a single tank when commanded, on a dual fuel tank vehicle application. With aid from an electrical switch located inside the vehicle cabin, the vehicle operator can select one of two fuel tanks to provide fuel to the vehicle’s engine. When electrically connected correctly, the selector valve will also provide the fuel level sender signal from each fuel tank onto the instrument cluster fuel gauge.

Product Features:

Product constructed to provide long-life operation

from

$152.99

GM Genuine Parts Fuel Tank Selector Valves are designed, engineered, and tested to rigorous standards, and are backed by General Motors. GM Genuine Parts are the true OE parts installed during the production of or validated by General Motors for GM vehicles. Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).

Product Features:

Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE)
GM Genuine Parts are designed, engineered and tested to rigorous standards, and are backed by General Motors
GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle
GM regularly updates production and service part designs to integrate new materials and technologies