2017 Jeep Cherokee Engine Cold Air Intakes

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. Some intakes are not legal for sale or use on any pollution-controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• Guaranteed to increase horsepower and torque.
• Mandrel-bent aluminum intake tube paired with oversized oiled cotton air filter.
• Engineered to provide high airflow and exceptional filtration.
• Replaces factory air filter and intake tube.
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions.
• Typical installation can be completed in 60 minutes or less with simple hand tools.
• No-Hassle Lifetime Limited Warranty.
• Will not void vehicle warranty(limited)

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

Unique One-Piece Sealed Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coldest air intake charge available. A urethane plug is also included if you wish to completely seal the auxiliary air scoop. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 5-Layer Performance Air Filter: This Momentum ST intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive round flange and is 8″ tall inverted top Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a silicone coupler at the throttle body is used for strength and durability while also providing the most secure installation available. Momentum ST intakes are designed with fewer parts for a quick and simple installation.

Product Features:

• Outflows Factory Intake By Up To 28%
• High Quality One-Piece Sealed Housing with Auxiliary Air Scoop
• CAD-Designed Roto-Molded Intake Tube
• Pro 5R Oiled 5-Layer Progressively Finer Mesh Oiled Media Filter

Unique One-Piece Sealed Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coldest air intake charge available. A urethane plug is also included if you wish to completely seal the auxiliary air scoop. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Large 5-Layer Performance Air Filter: This Momentum ST intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive round flange and is 8″ tall Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel clamps and a silicone coupler at the throttle body is used for strength and durability while also providing the most secure installation available. Momentum ST intakes are designed with fewer parts for a quick and simple installation.

Product Features:

• 315 CFM Rating at 7 in. H2O
• Outflows Factory Intake By Up To 45 Percent
• High Quality Sealed Housing
• CAD Designed Roto-Molded Intake Tube

A high-density polyethylene (HDPE) rotationally-molded tube helps increase the volume of airflow to your engine, and provides a guaranteed increase in horsepower and torque. These systems are paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

Product Features:

• Guaranteed to increase horsepower and torque
• Roto-molded HDPE intake tube paired with oversized oiled cotton air filter
• Engineered to provide high airflow and exceptional filtration
• Replaces factory air filter and intake tube
• Filter only requires cleaning every 100,000 miles under normal highway driving conditions
• Typical installation can be completed in 60 minutes or less with simple hand tools
• No-Hassle Lifetime Limited Warranty
• Will not void vehicle warranty(limited)

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

Product Features:

• Uses Pro DRY S Air Filter For Maximum Convenience
• Rotomolded-Mold Tube
• 1-Piece Heat Shield
• Hassle Free Installation